AEM
Home Help [Feedback] [For Subscribers] [Archive] [Search] [Contents]
This Article
Right arrow Full Text (PDF)
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Services
Right arrow Similar articles in this journal
Right arrow Similar articles in PubMed
Right arrow Alert me to new issues of the journal
Right arrow Download to citation manager
Right arrowReprints and Permissions
Right arrow Copyright Information
Right arrow Books from ASM Press
Right arrow MicrobeWorld
Citing Articles
Right arrow Citing Articles via Google Scholar
Google Scholar
Right arrow Articles by Ragab-Depre, N J
Right arrow Search for Related Content
PubMed
Right arrow PubMed Citation
Right arrow Articles by Ragab-Depre, N J
Agricola
Right arrow Articles by Ragab-Depre, N J

 Previous Article  |  Next Article 

Appl Environ Microbiol. 1982 September; 44(3): 555-560

Water disinfection with the hydrogen peroxide-ascorbic acid-copper (II) system.

N J Ragab-Depre

ABSTRACT

Treatment of secondary effluents with hydrogen peroxide (10 mg/liter)-ascorbic acid (10 mg/liter)-Cu2+ (0.5 mg/liter) for 60 min resulted in around 99% reduction of the initial plate count. Hydrogen peroxide could be replaced by other peroxygen compounds; ascorbic acid could be replaced by other reducing agents, of which sodium sulfite and ethanol were the most effective. Cu2+, however, could not be replaced by other metal ions without loss of bactericidal efficiency of the ternary combination. Enterobacteriaceae, total and fecal coliforms, staphylococci, and micrococci were reduced by 99.0 to 99.9%. Group D streptococci aerobic spores were reduced by 80 and 15%, respectively. Clostridium perfringens, yeasts, and molds were not killed by the disinfectant combinations. The effect of pH was only minor in the range from 6 to 7.5. At a higher pH value the bactericidal effects tended to decrease. The hydrogen peroxide-ascorbic acid-Cu2+ combination made it possible to obtain 99% reduction within 30 min. When using the hydrogen peroxide-sodium sulfite-Cu2+ or the hydrogen peroxide-ethanol-Cu2+ combinations, 60 min of contact time was necessary to obtain 99% reduction of the initial plate count. Cu2+ combined to an intermediate product of the ascorbic acid autoxidation is the toxic agent, and its penetration into the cell is promoted by hydrogen peroxide.


Appl Environ Microbiol. 1982 September; 44(3): 555-560







Home Help [Feedback] [For Subscribers] [Archive] [Search] [Contents]
J. Bacteriol. Microbiol. Mol. Biol. Rev. Eukaryot. Cell All ASM Journals

Copyright © 1982 by the American Society for Microbiology. All rights reserved.