Previous Article | Next Article ![]()
Appl. Environ. Microbiol., Mar 1997, 973-977, Vol 63, No. 3
D De Beer, A Schramm, CM Santegoeds and M Kuhl
A highly selective liquid membrane nitrite microsensor based on the
hydrophobic ion-carrier aquocyanocobalt(III)-hepta(2-phenylethyl)-cobrynate
is described. The sensor has a tip diameter of 10 to 15 (mu)m. The response
is log-linear in freshwater down to 1 (mu)M NO(inf2)(sup-) and in seawater
to 10 (mu)M NO(inf2)(sup-). A method is described for preparation of
relatively large polyvinyl chloride (PVC)-gelled liquid membrane
microsensors with a tip diameter of 5 to 15 (mu)m, having a hydrophilic
coating on the tip. The coating and increased tip diameter resulted in more
sturdy sensors, with a lower detection limit and a more stable signal than
uncoated nitrite sensors with a tip diameter of 1 to 3 (mu)m. The coating
protects the sensor membrane from detrimental direct contact with biomass
and can be used for all PVC-gelled liquid membrane sensors meant for
profiling microbial mats, biofilms, and sediments. Thanks to these
improvements, liquid membrane sensors can now be used in complex
environmental samples and in situ, e.g., in operating bioreactors. Examples
of measurements in denitrifying, nitrifying, and nitrifying/denitrifying
biofilms from wastewater treatment plants are shown. In all of these
biofilms high nitrite concentrations were found in narrow zones of less
than 1 mm.
Copyright © 1997, American Society for Microbiology
A Nitrite Microsensor for Profiling Environmental Biofilms
Max Planck Institute for Marine Microbiology, Bremen, and Department of Microbiology, Technical University of Munich, Munich, Germany
This article has been cited by other articles:
| J. Bacteriol. | Microbiol. Mol. Biol. Rev. | Eukaryot. Cell | All ASM Journals |
|---|