INTRODUCTION

Top Abstract Introduction Materials and Methods Results Discussion References

The most efficient lignin-degrading microorganisms are the white-rot basidiomycetes, of which Phanerochaete chrysosporium strain BKM-F-1767 has been the most extensively characterized (18, 25). Under appropriate culture conditions, the fungus secretes multiple isozymes of lignin peroxidase (LiP) and manganese peroxidase (MnP) as well as of the cellulase cellobiohydrolase I. These isozymes are encoded by complex families of structurally related genes, although the precise number of genes and the relationships among the sequences have not been determined. Difficulties differentiating allelic variants from closely related genes and the lack of an accepted standardized nomenclature have complicated the issue (14).

Allelism could be experimentally resolved if cloning was routinely performed with cultures originating from single basidiospores, which are the homokaryotic products of meiosis. The haploid homokaryons possess a single nuclear type, in contrast to the two different nuclear types found in dikaryons. Analyses of single-basidiospore cultures have been used to differentiate alleles and to create genetic and physical maps of P. chrysosporium (10, 14, 16, 23, 27, 28, 31, 33, 36, 37). However, single-basidiospore strains typically exhibit reduced sporulation, growth rate, and enzyme yields relative to the parental strain (31, 43). Further, chromosome lengths and other aspects of genome organization are not maintained through meiotic recombination, limiting the experimental value of single-basidiospore strains (10, 13, 23, 37, 44). Homokaryons of nonmeiotic origin would greatly simplify analysis of complex gene families without the disadvantages incurred by recombination.

In addition to the intensively studied gene families, P. chrysosporium contains at least one family of repetitive elements. A 1,747-bp insertional element designated Pce1 was detected in LiP gene lipI2 (15). The element had features common to class II nonautonomous transposons (11, 20), such as inverted terminal repeats, and a putative target site duplication (TA), and it was present in multiple copies in BKM-F-1767 and in other strains of P. chrysosporium. However, Pce1 contains no extended open reading frames and shows no sequence similarity to known transposases. A single 3.7-Mb chromosome was observed on pulsed-field gel Southern blots probed with Pce1, suggesting a nonrandom distribution of Pce1-like sequences. The number, sequence, insertional context, and genomic organization of the additional Pce1-like sequences were not previously investigated.

Pce1 is inserted immediately adjacent to the fourth intron of lipI2, suggesting that it may be spliced from the mature transcript. Reverse transcription-PCR (RT-PCR) analysis of dikaryotic strain BKM-F-1767 identified a transcript from the wild-type allele, lipI1, but not from Pce1-disrupted lipI2 (15). Thus, in the heterozygous dikaryon, Pce1 transcriptionally inactivates lipI2 and is not spliced, as are certain transposons of higher plants (24). However, lipI2 processing in the absence of lipI1 (i.e., in a homokaryon containing only the lipI2 allele) was not previously assessed.

To simplify genetic analyses, we isolated and characterized a homokaryotic derivative of BKM-F-1767. The homokaryon was used to investigate the organization and transcriptional effects of Pce1-like elements. Four highly conserved elements were sequenced and mapped to a single chromosome. The homokaryon phenotype was similar to that of the parental dikaryon even though lipI was transcriptionally inactivated. The homokaryotic strain will simplify identification of new genes in libraries, enhance the resolution of pulsed-field gels, and aid investigations of chromosome-length polymorphisms.

	MATERIALS AND METHODS

Top Abstract Introduction Materials and Methods Results Discussion References

Fungal strains and isolation of homokaryons. P. chrysosporium BKM-F-1767 was obtained from the Center for Forest Mycology Research, Forest Products Laboratory, Madison, Wis. Single-basidiospore progeny from BKM-F-1767 were described elsewhere (14).

1

Culture conditions and enzyme assays. Nitrogen-limited cultures were grown statically at 39°C as described previously (8, 26) and harvested on day 5. LiP activities were assayed by veratryl alcohol oxidation (39). MnP activities were measured by monitoring the oxidation of 2,6-dimethoxyphenol (Aldrich, Milwaukee, Wis.) at 469 nm (41). Glyoxal oxidase activity was assayed as described elsewhere (21, 22) using methylglyoxal as the oxidase substrate and phenol red as the substrate for horseradish peroxidase in a coupled assay.

Isolation and mapping of Pce1-like sequences. Pce1-like sequences were cloned from a pWE15-based cosmid library of P. chrysosporium (13) by probing with the full-length copy of Pce1. In some cases, the Universal Genome Walker kit (Clontech Laboratories, Palo Alto, Calif.) was used to clone adjacent regions (34).

Transcription of lipI2. RT-PCR was used to identify lipI transcripts. Poly(A) RNA was derived from 2-week-old Aspen wood chip cultures, which favor lipI transcription (19). RT was primed with oligo(dT), and PCR conditions were as described previously (19, 40). Three sets of primers were designed to amplify different regions of lipI cDNA, including one set which flanked the Pce1 insert of lipI2 (Fig. 1). Primers were based on coding regions conserved in both alleles and were designated A through F, with sequences as follows: A, 5'-GCGCCTGGTTCGATGTTTTGGATG-3'; B, 5'-CGCCAGGGGTGACGTTGTGCTTCT-3'; C, 5'-TCTATCGCTATCTCTCCCGCT-3'; D, 5'-CGGTTCGGGAACAAGGCCATC-3'; E, 5'-CAGCTCCAGATGGCCTTGTTCC-3'; and F, 5'-CGCGGGCGATGGTGTGG-3'. Control PCR reactions contained cosmids carrying either lipI1 or lipI2. Reactions were run for 35 cycles, as previously reported (37), and the products were size fractionated in agarose gels. Similar studies were also performed using RNA from nitrogen-starved cultures, in which levels of lipI transcripts are relatively lower (37).

View larger version (34K): [in this window] [in a new window]   FIG. 1.   Analysis of lipI transcripts. At the top, a schematic representation of lipI alleles shows the locations of introns (black fill), Pce1 (gray fill), and the primers designated A through F (arrows indicate direction of transcription. Ethidium bromide-stained PCR products size fractionated on agarose gels are shown at the bottom. Lanes 1 and 2 are controls, showing amplification products from cosmid templates carrying lipI1 and lipI2, respectively. RT-PCR products from RNA derived from Aspen wood chip cultures inoculated with BKM-F-1767 and RP-78 are shown in lanes 3 and 4, respectively. No RT-PCR amplification product was obtained from the RP-78 RNA (lane 4). In contrast, BKM-F-1767 cultures contained the expected lipI transcript (lane 3). The sizes of the PCR products (in nucleotides) are shown on the left.

Sequence analysis. Nucleotide sequences were determined with the ABI Prism Dye Terminator Cycle Sequencing kit (Perkin-Elmer Applied Biosystems, Foster City, Calif.) with an ABI373 DNA sequencer. Nucleotide and amino acid sequence similarity searches used the BLAST method (5) on the National Center for Biotechnology Information databases.

Nucleotide sequence accession numbers. The elements designated Pce2, Pce3, and Pce4, together with a >900-bp flanking region for each, were assigned GenBank accession numbers AF134289, AF134290, and AF134291, respectively.

	RESULTS

Top Abstract Introduction Materials and Methods Results Discussion References

Isolation and characterization of homokaryon RP-78. Homokaryotic derivatives of BKM-F-1767 were isolated from regenerated protoplasts, a strategy successfully used for other basidiomycetes (1, 12, 29, 35). In contrast to these previous studies, homokaryons and dikaryons cannot be simply differentiated because P. chrysosporium hyphae lack clamp connections (9) and the mating system is not well defined (4, 38).

View larger version (59K): [in this window] [in a new window]   FIG. 2.   Southern blot analysis of six PCR amplified genes, demonstrating the homokaryotic nature of RP-78. For each gene, two identical gels were run, with BKM-F-1767 PCR products in the left lanes and RP-78 products in the right. Each gel was then blotted to Nytran and probed with an allele-specific oligonucleotide. The blots show both alleles present in the dikaryotic strain BKM-F-1767 but only a single allele present in RP-78. PCR product sizes were as follows: lipE, 1,535 nucleotides (nt); lipJ, 675 nt; lipF, 1,480 nt; lipD, 440 nt; glx, 680 nt; and mnp2, 1,509 nt.

Genomic organization of the Pce1 family. We cloned three additional Pce1-like sequences designated Pce2, Pce3, and Pce4. Analysis of flanking regions revealed no extended open reading frames and no significant similarity to database sequences. Surprisingly, the three new elements had at least 98% nucleotide identity with Pce1. The inverted terminal repeats were identical among the four Pce1 sequences, but they were imperfect, with 25 of 32 bases conserved in Pce2, Pce3, and Pce4. In short, all four sequences appeared to be the same nonautonomous class II element.

View larger version (10K): [in this window] [in a new window]   FIG. 3.   Genetic linkage of Pce1, Pce2, and Pce3 and their relationship to the LiP gene cluster. Linkage was based on analyses of 54 single-basidiospore cultures. Vertical arrows indicate positions of elements. Thickened horizontal arrows show transcriptional orientation of LiP genes (36). Pce4 segregated independently.

Transcription of lipI2. Under conditions favoring lipI expression (19), RT-PCR showed the presence of lipI transcripts in the dikaryotic parent BKM-F-1767 but not in RP-78 (Fig. 1). Conceivably, a Pce1-containing transcript might not be efficiently reverse transcribed and PCR amplified. To minimize this possibility, three sets of primers were used, including two which did not flank the insertion (results for primers A plus B and E plus F are shown in Fig. 1). The identity of the lipI cDNAs (Fig. 1, lane 3) was confirmed by direct sequencing, and identical results were obtained when RP-78 was grown in nitrogen-starved defined medium (data not shown).

	DISCUSSION

Top Abstract Introduction Materials and Methods Results Discussion References

Protoplast-derived homokaryons, termed "protoclones" by Sonnenberg et al. (35), have been identified by other means from other basidiomycetes (1, 12, 29, 35). The nucleus of P. chrysosporium protoclone RP-78 is genetically identical to a single nucleus of the dikaryotic strain BKM-F-1767, from which it was derived. RP-78 is genetically distinct from single-basidiospore cultures, which are also homokaryotic but have undergone meiotic recombination. The use of RP-78 should facilitate gene cloning, mutagenesis studies, and additional studies on the genetic mechanisms controlling variation in ligninolytic activity. For example, identifying new members of gene families, either from conventional libraries or by PCR amplification, will be greatly simplified because questions of allelism can be excluded. Pulsed-field gel analysis using RP-78 could avoid dimorphic sister chromosomes (10, 13, 23, 37) and thereby result in improved band resolution.

RP-78 is similar to BKM-F-1767 in its ligninolytic enzyme activity (Table 1) and biomechanical pulping performance (2; D. Dietrich, J. Gaskell, M. Akhtar, R. Blanchette, and D. Cullen, unpublished data). Interestingly, RP-78 LiP activity is approximately the same as that of BKM-F-1767 although it lacks a transcriptionally active lipI allele. This observation suggests that LiP activity is influenced by multiple factors and supports the hypothesis that LiP genes are redundant.

Previous Southern blot analysis of BKM-F-1767 suggested multiple Pce1-like sequences, and a strong signal was assigned to a single chromosome band of 3.7 Mb (15). Eight lip genes also reside on this chromosome and its dimorphic homologue of 3.5 Mb (36). Because of the Pce family's unusual distribution, the prospect of isolating an active transposon, and the possibility that other functional genes might be disrupted, three additional Pce1-like elements were cloned, sequenced, and mapped.

All four members of the Pce family were over 98% identical to each other, an unexpected result because none have extended open reading frames (the largest being 155 amino acids). The observed sequence conservation suggests these elements have arisen relatively recently. The Pce family may represent the inactive remnants of a transposable element. Approximately 15 copies of the 437-bp element, vader, are present in the Aspergillus niger genome, while their progenitor, Tan1, a 2.3-kb active transposon, is present as a single copy (30). Although no active progenitor of Pce was detected in P. chrysosporium, the possibility of some biological activity for the Pce sequences cannot be excluded.

Segregation analysis showed that Pce1, Pce2, and Pce3 were linked. While Pce4 was localized to the same chromosome, the distance was such that it appeared unlinked. Formally, the possibility of comigrating 3.7-Mb chromosomes (one with Pce4 and the other with Pce1, Pce2, and Pce3) cannot be dismissed. However, this seems unlikely because none of the more than 25 genes that have been genetically and physically mapped to date (14; S. Alsop, B. Janse, J. Gaskell, A. Vanden Wymelenberg, M. Vallim, and D. Cullen, unpublished data) reside on nonhomologous 3.7-Mb chromosomes. Moreover, Pce4 clearly cosegregates in the homokaryon RP-78.

The nonrandom distribution of eukaryotic repetitive sequences has been explained by a variety of mechanisms, including site-specific insertions and unequal crossover events between repetitive elements (32, 42). Site-specific insertion, either by specific sequences or by recognition of particular physical characteristics of certain regions of the genome, is not compatible with the available data for the Pce family. Over 900 bp flanking each Pce insertion site were sequenced, and no obvious similarity was detected.

Unequal crossover between repetitive sequences may be the simplest explanation for the unusual organization of the Pce family. Repetitive sequences (such as transposable elements or highly similar gene families) may function as small regions of homology for recombination to occur (44). Unequal crossover between sister chromosomes would generate a duplication in one and a deletion in the other. Thus, mechanisms that may enrich the Pce family on a single sister chromosome may also contribute to the observed chromosome length dimorphism. Arguing against this hypothesis, however, the regions surrounding insertion sites for all members of the Pce family appear to be conserved on both homologues (data not shown). No duplications or deletions were detected on either homologue. Nevertheless, the Pce1 family directly contributes to the observed length dimorphism, albeit a small proportion (~8 of ~200 kb). Conceivably, other repetitive sequences may be distributed on the 3.7-Mb homologue.

In conclusion, homokaryon RP-78 was isolated from regenerated protoplasts and shown to be phenotypically similar to its dikaryotic parent, BKM-F-1767. Both RP-78 and BKM-F-1767 contain four copies of the nonautonomous class II transposon Pce, all of which mapped to a 3.7-Mb chromosome. The lipI2 gene of RP-78 has been transcriptionally inactivated by Pce1 insertion but retains LiP activity equivalent to that of the dikaryon, suggesting that some lip genes are redundant. We anticipate that RP-78 will be useful for a variety of genetic analyses, especially differentiating new members of complex gene families.