INTRODUCTION

Top Abstract Introduction Materials and Methods Results Discussion References

It has been shown for a wide range of haloorganic compounds that reductive dechlorination is the first crucial step in the degradation of such pollutants (15, 25). Halorespiring bacteria have received increasing attention during the past decade due to a significant contribution to reductive dehalogenation processes occurring in anoxic polluted environments such as soils, aquifers, and sediments (14, 24). In contrast to the cometabolic reductive dehalogenation catalyzed by various metal-containing tetrapyrrol cofactors in a variety of anaerobic bacteria, this reaction is catalyzed at much higher rates by specific enzymes in halorespiring microbes, where it is coupled to energy conservation by electron transport-coupled phosphorylation (14, 18, 31). One of these strains is the versatile, low-G+C, gram-positive bacterium Desulfitobacterium dehalogenans, which is able to link the oxidation of several electron donors such as hydrogen, formate, lactate, and pyruvate to the reduction of various organic and inorganic acceptors, including ortho-chlorinated phenols (o-CP), fumarate, and nitrate (37). Recently, the o-CP-reductive dehalogenase (CPR) from D. dehalogenans has been purified and characterized at the biochemical and genetic levels (33, 39). Comparison with other chloroalkene- and haloaromate-reductive dehalogenases isolated and characterized from various phylogenetically distinct halorespiring bacteria indicated that these enzymes share significant similarities in both structural and functional properties, suggesting that they constitute a novel class of corrinoid-containing reductases (for recent reviews, see references 18 and 31).

The detailed molecular analysis of the cpr gene cluster in D. dehalogenans led to the identification of genes encoding putative regulatory proteins and protein-folding catalysts, the transcription of which was specifically induced under halorespiring conditions. From these results, their potential involvement in regulation and maturation of the reductive dehalogenase complex has been suggested (33). Additional genomic loci that appear essential for functional o-CP respiration of D. dehalogenans have been identified by means of random chromosomal integration of the conjugational transposon Tn916 (32). Nevertheless, detailed structural and functional analysis of these proteins has been hampered by the absence of genetic techniques for D. dehalogenans, including transformation, gene cloning, and specific gene disruption and insertion. Moreover, the development of such genetic modification tools would also enable the design of strains with improved performance in the bioremediation of polluted environments (19, 35).

Host-vector systems that allow for the genetic, metabolic, and protein engineering of low-G+C gram-positive bacteria (LGB) have been developed and optimized mainly for industrially applied strains of lactic acid bacteria, for bacilli, and, to a lesser extent, for clostridia (for reviews see references (10 to 12 and 41). It has been shown that vectors based on the theta replicon of the broad-host-range conjugative plasmid pAM1 (6), among which are the cloning vectors pIL252 and pIL253, are functional in all genera of LGB studied, indicating their potential use for halorespiring genera of LGB, such as Desulfitobacterium and Dehalobacter (12, 30). Similarly, vectors of the pG⁺host series of thermosensitive derivatives of yet another broad-host-range plasmid, pWV01, have been proven to be instrumental for high-efficiency gene inactivation, replacement, and insertional mutagenesis, especially in poorly transformable LGB (2, 12, 22, 23).

The main objectives of this study were (i) to develop an efficient protocol for the transformation of D. dehalogenans, (ii) to investigate the suitability of gene transfer systems previously developed for other LGB, (iii) to confirm temperature-sensitive replication of pG⁺host9 in D. dehalogenans, and (iv) to demonstrate its applicability for specific gene disruption using the putative fumarate reductase-encoding frdA gene as a model target.

	MATERIALS AND METHODS

Top Abstract Introduction Materials and Methods Results Discussion References

Materials. All gases were obtained from Hoek Loos (Schiedam, The Netherlands). When appropriate, experiments were carried out in an anaerobic glove box (Coy Laboratory Products, Grass Lake, Mich.) under an atmosphere of 96% N₂ and 4% H₂. The oxygen concentration was kept low with the palladium catalyst RO-20, provided by BASF (Arnhem, The Netherlands).

Bacterial strains, plasmids, and culture conditions. D. dehalogenans strain JW/IU-DC1 (DSM 9161) (37) was routinely grown under anaerobic conditions (gas phase, 100% N₂) at 37°C in basal mineral medium as described by Neumann et al. (26), supplemented with 0.1% peptone, 30 mM NaHCO₃, and trace elements and vitamin solution as recommended by the German Collection of Microorganisms and Cell Cultures (Brunswick, Germany). An electron donor and an electron acceptor were added to the appropriate concentrations from sterile anaerobic stock solutions.

DNA isolation and manipulation. Total DNA of D. dehalogenans was isolated as described previously (39). Plasmid DNA was isolated from E. coli by using the alkaline lysis method, and standard DNA manipulations were performed according to established procedures (28) and manufacturers' instructions. Isolation of plasmid DNA from L. lactis was performed as described previously (13). L. lactis was transformed according to the method of Wells et al. (40). Large-scale preparations of plasmid DNA (pIL253, pG⁺host9) were purified by CsCl density gradient centrifugation (28).

Transformation procedure and competence of D. dehalogenans. For the transformation of D. dehalogenans, the electroporation-based method described by Wells et al. (40) was modified and optimized for use with anaerobic bacteria. Cells of D. dehalogenans were grown in the presence of 40 mM glycine with 20 mM lactate as the electron donor and 20 mM fumarate as the electron acceptor. Unless otherwise indicated, all subsequent steps were carried out in the anaerobic glove box. Exponentially growing cells were harvested at an A₆₀₀ of approximately 0.2 by centrifugation at 2,600 × g for 10 min at 4°C and then resuspended in 0.15 volume of ice-cold anaerobic washing buffer (0.5 M sucrose-10% glycerol). Cells were recovered by centrifugation at 4,000 × g for 10 min at 4°C, washed with 0.05 volume of washing buffer, recentrifuged, and finally resuspended in 0.001 volume of washing buffer. For electroporation, DNA was added in 0.5 to 1.0 µl of deionized water to 40 µl of concentrated cell suspension and transferred to precooled 0.2-cm electroporation cuvettes. A single pulse was applied outside the glove box at different settings (field strength, 12.5 kV · cm¹; capacitance, 25 µF; resistance, 200 to 800 ) using a Gene Pulser (Bio-Rad, Hercules, Calif.). Immediately after electroporation, cells were moved back into the anaerobic glove box, mixed with 0.96 ml of recovery medium (growth medium containing 20 mM lactate and fumarate and 0.5 M sucrose), and incubated at 37°C for 5 h. To determine the influence of the transformation procedure on the viability of D. dehalogenans, appropriate dilutions were inoculated onto plates without erythromycin containing 20 mM lactate and fumarate as described previously (32). Transformants were selected on plates containing 20 mM lactate and fumarate and 5 µg of erythromycin/ml. Further subcultivation of single colonies in liquid medium was performed as described previously (32). Plasmid DNA was isolated from D. dehalogenans using a protocol modified from reference 13. Briefly, protoplasts were prepared from 12 ml of early-stationary-phase culture in 250 µl of THMS buffer (30 mM Tris-HCl [pH 8.0] and 3 mM MgCl₂ in 25% sucrose) containing 20 mg of lysozyme/ml (38). Subsequently, plasmid DNA was purified by alkaline lysis and recovered by isopropanol precipitation. Agarose gel electrophoresis and Southern blot analysis were used to check for the presence of plasmids.

Thermosensitivity of pG⁺host9 in D. dehalogenans. To determine the segregational stability of the thermosensitive vector pG⁺host9 in D. dehalogenans, an early-stationary-phase culture of plasmid-carrying D. dehalogenans that was grown in the presence of 40 mM pyruvate and 5 µg of erythromycin/ml at 30°C was diluted 40-fold into medium without antibiotics and incubated at 30°C to stationary phase (0 h). This culture was then diluted 100-fold into fresh medium without antibiotics and incubated at 30, 37, and 40°C. Appropriate dilutions were inoculated onto plates with or without erythromycin (5 µg/ml) at 0.1, 16, and 40 h after dilution and were incubated at 30°C. After 40 h of growth, all cultures had reached stationary phase. Cultures were again diluted 10-fold and kept for an additional 24 h at the respective temperatures until stationary phase was reached (68 h). Total DNA was isolated from samples taken at 0, 40, and 68 h, digested with EcoRI, and analyzed by Southern blot analysis. Linearized pG⁺host9 was used as a plasmid-specific probe for hybridization. Hybridization with a probe specific for the D. dehalogenans frdAC genes was used as an internal standard. This probe was a PCR product obtained with primers BG355 (positions 942 to 974 of the frd gene cluster) and IK04 [5'-(A/G)TG NGC NCC NC(G/T) NS(A/T) (C/T)TC-3'; positions 3157 to 3140 of the frd gene cluster] (see below and Fig. 3). A Hybond-N⁺ nylon transfer membrane (Amersham Life Science, Little Chalfont, United Kingdom) was used for Southern blot analysis, and probes for hybridization experiments were labeled by nick translation in the presence of [-³²P]dATP (Amersham Pharmacia Biotech).

Cloning of a putative fumarate reductase-encoding operon. The degenerated primers IK01 [5'-GA(A/G) (A/G/T)(G/C)N (G/T)(G/C)N A/C)GN GGN GAN GGN GG-3'; positions 2312 to 2334] and IK04, which were designed based on an amino acid sequence alignment of known bacterial fumarate reductases, were used to PCR amplify a fragment of a putative fumarate reductase-encoding operon from the chromosomal DNA of D. dehalogenans. The resulting 0.85-kb PCR product was cloned in E. coli using XcmI-digested pMON38201, yielding pLUW902. Subsequently, Southern blot analysis of PstI-EcoRI-digestedchromosomal DNA of D. dehalogenans revealed a 3-kb fragment that strongly hybridized with the radiolabeled 0.85-kb PCR product. The 3-kb fragment was cloned in E. coli using PstI-EcoRI-digested pUC18, resulting in pLUW903. pLUW904 was obtained by inverse PCR (36) that was performed as described previously (39) with BamHI-digested and self-ligated chromosomal DNA of D. dehalogenans by using the divergent primer pair BG283 and BG284 (positions 2456 to 2477 and positions 2356 to 2335, respectively).

Plasmid constructions and single-crossover integration into the D. dehalogenans chromosome. A 578-bp ApaI-EcoRI internal fragment of the D. dehalogenans frdA gene was cloned in E. coli MC1061 using ApaI-EcoRI-digested pG⁺host9, yielding pLUW906. Subsequently, electrocompetent cells of D. dehalogenans were transformed with plasmid DNA isolated from E. coli MC1061 using a QAprep Spin Miniprep kit (Qiagen GmbH). Recovery after electroporation and cultivation on selective plates were performed at 30°C. Erythromycin-resistant colonies that appeared within 5 days were transferred to liquid selective medium containing 40 mM pyruvate and were incubated at 30°C. Cultures were diluted 20-fold in the same medium, grown at 30°C for 8 h to reach log phase, and then shifted to 40°C for 16 h (3 to 5 generations). Appropriate dilutions were incubated on plates in the presence of 20 mM pyruvate and erythromycin at 40°C in order to detect integration events and on nonselective plates at 40°C for the determination of viable cell counts. The ratio of the two counts was used to determine the frequency of integration per cell as described by Biswas et al. (2). Integrants that were isolated at 40°C were subsequently routinely maintained in selective medium containing 20 to 40 mM pyruvate. Southern blot analysis of HincII-digested chromosomal and plasmid DNA and preparation of pG⁺host9- and D. dehalogenans frdAC-specific probes were performed as described above.

DNA sequencing and sequence analysis. DNA sequencing was performed using a LiCor (Lincoln, Nebr.) DNA sequencer 4000L. Plasmid DNA used for sequencing reactions was purified with the QIAprep Spin Miniprep kit (Qiagen GmbH). Reactions were performed using the Thermo Sequenase fluorescent-labeled primer cycle sequencing kit (Amersham Pharmacia Biotech). Fluorescently (IRD 800) labeled universal sequencing primers were purchased from MWG Biotech. Sequence similarity searches and alignments were performed using the BLAST 2.0 program (1) (National Center for Biotechnology Information, Bethesda, Md.) and the Clustal X (34) and GeneDoc (K. B. Nicholas and H. B. J. Nicholas, GeneDoc: a tool for editing multiple sequence alignments, 1997) programs and DNAstar package (DNASTAR Inc., Madison, Wis.), respectively.

Enzyme and protein assays. Harvesting of cells and preparation of cell extracts by sonication under anoxic conditions were performed as described previously (39). Fumarate reductase activities were determined spectrophotometrically at 30°C in 1 ml of 100 mM Tris-HCl (pH 8.0) as described previously (32). One unit of enzyme activity corresponds to the amount of enzyme catalyzing the conversion of 1 µmol of substrate or 2 µmol of benzyl viologen per min. Succinate dehydrogenase activity was measured with 2,6-dichlorophenolindophenol and phenazine methosulfate as an artificial electron acceptor as described by Schirawski and Unden (29). Protein was determined according to the method of Bradford, with bovine serum albumin as the standard (5).

Nucleotide sequence accession number. The nucleotide sequence of the putative fumarate reductase-encoding operon has been deposited in GenBank under accession no. AF299117.

	RESULTS

Top Abstract Introduction Materials and Methods Results Discussion References

Development of an electroporation-based transformation protocol for D. dehalogenans. To allow for the application of plasmid vector systems for genetic manipulation of the strict anaerobe D. dehalogenans, an electroporation-based transformation protocol for this bacterium was designed and optimized using the promiscuous plasmid pIL253 (30). Because this cloning vector, which is a derivative of the broad-host-range thetareplicating plasmid pAM1, carries an erythromycin resistance marker, we checked D. dehalogenans for its sensitivity to this antibiotic. On plates that contained 0.1 µg of erythromycin/ml, 6.5 × 10⁶ CFU/ml was obtained, compared to 4 × 10⁷ CFU/ml on plates without any antibiotic. At erythromycin concentrations of 0.25 and 0.5 µg/ml, microcolonies colonies appeared after 4 days, whereas no colonies developed at concentrations of 1 µg of erythromycin/ml, indicating that the frequency of spontaneous resistance to erythromycin is below 2.5 × 10⁷ per CFU. Subsequently, a concentration of 5 µg of erythromycin/ml was used in solid and liquid media for the selection of strains of D. dehalogenans carrying the erythromycin resistance marker.

1

View larger version (16K): [in this window] [in a new window]   FIG. 1.   Survival and transformation efficiency of cells of D. dehalogenans after electroporation. Survival was defined as CFU per milliliter of cell suspension on nonselective plates (). Efficiency of transformation of D. dehalogenans was determined on plates containing 5 µg of erythromycin/ml and calculated as CFU per microgram of CsCl-purified pIL253 ().

Segregational stability and thermosensitivity of pG⁺host9 in D. dehalogenans. The thermosensitive broad-host-range pG⁺host vector family has been shown to be instrumental for high-efficiency gene inactivation and replacement in gram-positive bacteria (2). In order to study the applicability of this system in the halorespiring bacterium D. dehalogenans, electrocompetent cells were transformed with CsCl-purified pG⁺host9. To ensure functional replication, posttransformation incubation and cultivation on selective media were performed at 30°C. Transformation yielded, on average, 600 transformants per µg of plasmid DNA. Colonies that appeared on selective plates were transferred to liquid medium. Plasmid DNA was isolated from early-stationary-phase cultures and could be detected by agarose gel electrophoresis (data not shown). In order to determine the permissive and nonpermissive temperatures for the replication of pG⁺host9 in D. dehalogenans, the segregational stability of the plasmid at nonselective concentrations of erythromycin was analyzed at different temperatures. A culture of D. dehalogenans containing the plasmid was diluted into fresh medium without any antibiotic and incubated at 30, 37, and 40°C. The ratio of the CFU on selective plates to the CFU on nonselective plates at 30°C was determined at 0, 16, and 40 h after dilution. Whereas this ratio decreased only 50% for the culture that was incubated at 30°C (0.51 at 0 h and 0.26 at 40 h), it dropped 72- and 48,000-fold at 37 and 40°C, respectively, within 7 generations (Fig. 2A). No influence of the incubation temperature on segregational stability was observed in the case of the nonthermosensitive plasmid pIL253 (data not shown). Similar results were obtained by Southern blot analysis of total DNA that was isolated before and 7 (40 h) and 10 generations (68 h) after the shift to nonselective conditions, respectively (Fig. 2B). The amount of plasmid-derived sequences detected following growth for 10 generations at 37 or 40°C was found to be more than 1,000-fold lower than that detected in cells grown at 30°C.

View larger version (9K): [in this window] [in a new window]   FIG. 2.   Segregational stability and thermosensitivity of pG+host9 in D. dehalogenans under nonselective culture conditions at 30°C (), 37°C (), and 40°C (). (A) Ratio of CFU on selective and nonselective plates. (B) Normalized ratio of hybridization signal intensities obtained with probes specific for pG+host9 and frdAC.

Cloning and sequence analysis of a putative fumarate reductase-encoding frdBAC gene cluster. The versatile gram-positive anaerobe D. dehalogenans has the ability to utilize fumarate as the terminal electron acceptor for anaerobic respiration with H₂, formate, lactate, or pyruvate as the electron donor. High fumarate reductase activity is readily detectable in cell extracts of D. dehalogenans grown in the presence of fumarate or yeast extract (32, 37). In order to provide an easy-to-screen target gene for the development of genetic modification approaches, we amplified a 0.85-kb fragment from the chromosome of D. dehalogenans using degenerated primers that were designed based on a primary sequence alignment of known succinate:quinone oxidoreductases (17). Sequence analysis indicated significant similarity with the flavoproteins of fumarate reductases and succinate dehydrogenases present in the databases. The subsequent isolation and analysis of a 5.3-kb PstI-BamHI chromosomal fragment from D. dehalogenans revealed the presence of three closely linked genes, frdCAB, and a fourth open reading frame, aabH, potentially encoding a polypeptide with significant similarity to ATP-binding cassette transporter binding proteins. The three genes frdC, frdA, and frdB potentially code for polypeptides of 208, 578, and 251 amino acids with calculated molecular masses of 23,728, 64,441, and 28,043 Da, respectively (Fig. 3A). The predicted gene products exhibit significant similarities with the type B membrane anchor, flavoprotein, and iron-sulfur-protein subunits of known succinate:quinone oxidoreductases, respectively (17). The highest similarities were found with the succinate dehydrogenases of Bacillus subtilis and Paenibacillus macerans (identities on the amino acid level, 72 and 74% for FrdA, 58 and 59% for FrdB, and 42 and 29% for FrdC, respectively). Upstream of each of the genes, potential Shine Dalgarno sequences that are complementary to the 3' end of the D. dehalogenans 16S rRNA (33) could be identified (data not shown).

View larger version (23K): [in this window] [in a new window]   FIG. 3.   Physical maps of the D. halogenans frd gene locus (A), pLUW906 (linearized) (B), and the frd gene locus after recombination (C). Horizontal arrows, open reading frames; triangles, oligonucleotides used in this study; horizontal lines, clones, constructs, and hybridizing fragments (F1 to F3, fragments hybridizing solely with the frdAC-specific probe; P1 to P3 fragments hybridizing solely with the pG+host9-specific probe: FP1 to FP3, fragments hybridizing with both probes). DNA restriction sites which were relevant for the construction of clones and constructs are indicated.

Gene-specific single-crossover integration in the D. dehalogenans chromosome. An internal 0.6-kb fragment of the D. dehalogenans frdA gene was cloned into pG⁺host9 in E. coli MC1061. The resulting plasmid, pLUW906 (Fig. 3B), was introduced by transformation into D. dehalogenans, where it was stably maintained at 30°C. Subsequently, cultures of D. dehalogenans containing either pLUW906 or pG⁺host9 were shifted to 40°C to induce single-crossover or spontaneous chromosomal integration, respectively. Single-crossover integration at the frdA locus would result in the generation of two, chromosomal copies of the frdA gene, truncated at either the 3' or the 5' end, and interrupted by the vector (Fig. 3C). Integrants were selected as erythromycin-resistant colonies appearing at 40°C, and integration of pLUW906 occurred at a frequency of 3.3 × 10⁴ ± 6.6 × 10⁵ per cell compared to 4.8 × 10⁶ ± 6.9 × 10⁶ per cell, for pG⁺host9.

View larger version (82K): [in this window] [in a new window]   FIG. 4.   Hybridization of HincII-digested total DNA from wild-type D. dehalogenans and pLUW906 integrants of D. dehalogenans with probes specific for frdAC (A) and pG+host9 (B). pG+host9 and pLUW906 plasmid DNAs were used as controls. The autoradiograph was digitally corrected for differences in signal intensities between lanes containing total DNA and lanes containing plasmid DNA. Lanes: 1, wild type; 2 and 3, pLUW906 integrants; 4, pLUW906; 5, pG+host9. DNA size markers are in kilobase pairs. F1 to F3 fragments hybridizing solely with the frdAC-specific probe; P1 to P3, fragments hybridizing solely with the pG+host9-specific probe (P1 and P2 originate from an additional HincII site between the EcoRI and ApaI sites in pG+host9); FP1 to FP3, fragments hybridizing with both probes.

	DISCUSSION

Top Abstract Introduction Materials and Methods Results Discussion References

The recent detailed molecular analysis of the halorespiratory system in the o-CP-respiring gram-positive bacterium D. dehalogenans has brought us to a deeper understanding of structure, function, and control of this novel respiratory pathway (32, 33, 39). Previously, we described the development of an efficient plating, delivery, and screening system that has been useful for the isolation of halorespiration-deficient mutants following the chromosomal integration of the conjugative transposon Tn916 (32). These mutants have been instrumental in the identification of genes potentially encoding polypeptides which might be involved as structural components of the halorespiratory network or might play a role in their control and functional assembly. However, the instability of some of these mutants and the occurrence of preferential integration has to some extent hampered their further physiological and biochemical characterization. Here we report on the development and validation of host-vector systems for the genetic modification of the environmentally important, strictly anaerobic, low-G+C, gram-positive bacterium D. dehalogenans.

An efficient electroporation-based transformation procedure was designed using a protocol that had previously been optimized for the high-frequency electrotransformation of L. lactis (40). Routinely, we obtained 1.0 × 10³ to 6.6 × 10³ erythromycin-resistant transformants per µg of plasmid DNA from the 4.8-kb theta-replicating pAM1 derivative pIL253. These values observed for D. dehalogenans are in the same range as or higher than transformation frequencies obtained for several other LGB, such as Clostridium spp., but are lower than those obtained in genetic model strains of L. lactis (7, 9, 21, 41). Although pIL253 was maintained in D. dehalogenans at only moderate copy numbers of approximately 10 copies per cell, compared with 45 to 85 copies for L. lactis (12, 30), the stable replication of the vector indicates its potential use as a cloning vector in D. dehalogenans.

Plasmids based on the thermosensitive replicon pG⁺host were previously shown to conditionally replicate in various LGB as well as in E. coli (22, 23). One of these, the 3.8-kb rolling-circle-replicating, thermosensitive pWV01 derivative pG⁺host9, was used for the development of a system for specific gene disruption in D. dehalogenans. Transformation efficiencies for pG⁺host9 were on average 1 order of magnitude lower (6 × 10²) than those for pIL253. These differences in frequency of transformation might be due to the difference in the mode of replication, as was previously reported for various other strains of LGB, but could also be caused by differences in marker gene expression (12, 20, 27). We were able to confirm thermosensitive replication, which was essentially absent at 40°C in D. dehalogenans. Although moderate segregational instability was also observed at the permissive temperature of 30°C, the relative number of viable cells able to grow on selective plates was reduced to 2 × 10⁵ at 40°C within 7 generations. The nonpermissive temperature that we found for D. dehalogenans is somewhat higher than that reported for L. lactis (22). However, as D. dehalogenans is still growing at almost maximum growth rates at 40°C, this does not affect the applicability of the pG⁺host system (37).

In order to provide a model target to test the thermosensitive vector pG⁺host9 for its applicability for specific gene disruption, we cloned and sequenced the putative fumarate reductase-encoding frdCAB operon from D. dehalogenans. A pG⁺host9 derivative containing a 0.6-kb internal frdA fragment was successfully introduced and maintained in D. dehalogenans under permissive conditions. Chromosomal integration at nonpermissive temperatures was significantly more efficient in the case of pLUW906 compared to the empty vector, and the observed integration frequencies were similar to those found for L. lactis (2). However, although stable site-specific chromosomal integration of pLUW906 into the frdA gene could be unambiguously demonstrated by Southern blot analysis and PCR analysis, the fumarate reductase activity was only partly reduced and no changes in growth with fumarate were observed compared to the growth of D. dehalogenans containing pG⁺host9. One possible explanation could be that at least one of the truncated frdA genes present in the pLUW906 integrant is still coding for a (partially) active fumarate reductase enzyme due to a polar effect from the inserted vector sequences. This, however, is rather unlikely, since both the 3'- and 5'-truncated frdA copies lack several conserved residues that are probably essential for fumarate reductase activity (4, 17). Another possibility could be that the frdCAB operon actually encodes a succinate dehydrogenase. Nevertheless, no significant succinate dehydrogenase activity could be detected in cell extracts of D. dehalogenans. Northern analysis of total RNA isolated from cultures of D. dehalogenans grown with different electron donors and 3-chloro-4-hydroxy-phenylacetic acid, nitrate, or fumarate as the electron acceptor indicated that transcription of the frdCAB operon is constitutive rather than being induced in the presence of fumarate. This, however, is not in agreement with the highly induced fumarate reductase activity that has been measured in fumarate-grown cells of D. dehalogenans (H. Smidt et al., unpublished data). This suggests that the frdCAB operon only partially codes for the fumarate reductase activity, which is measured with benzyl viologen as an artificial electron donor. If so, this strongly supports the presence of at least one additional fumarate reductase-encoding gene cluster.

The development of the various gene transfer systems reported here is the first example of a genetic system for a halorespiring microbe. It has significantly improved our possibilities for studying the function and regulation of chromosomal genes in D. dehalogenans, including those relevant for the novel halorespiratory pathway this organism possesses. Moreover, the present set of genetic tools will enable the further exploitation of D. dehalogenans and related strains as dedicated degraders of recalcitrant environmental pollutants.