Previous Article | Next Article ![]()
Applied and Environmental Microbiology, November 2002, p. 5311-5317, Vol. 68, No. 11
0099-2240/02/$04.00+0 DOI: 10.1128/AEM.68.11.5311-5317.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
3626 Dual Lysis System Is Active against All Tested Clostridium perfringens Strains
sa Vukov, Siegfried Scherer, and Martin J. Loessner*
Institut für Mikrobiologie, FML Weihenstephan, Technische Universität München, Weihenstephaner Berg 3, D-85350 Freising, Germany
Received 29 March 2002/ Accepted 2 August 2002
|
|
|---|
3626, whose dual lysis gene cassette consists of a holin gene and an endolysin gene. Hol3626 has two membrane-spanning domains (MSDs) and is a group II holin. A positively charged beta turn between the two MSDs suggests that both the amino terminus and the carboxy terminus of Hol3626 might be located outside the cell membrane, a very unusual holin topology. Holin function was experimentally demonstrated by using the ability of the holin to complement a deletion of the heterologous phage
S holin in 
Sthf. The endolysin gene ply3626 was cloned in Escherichia coli. However, protein synthesis occurred only when bacteria were supplemented with rare tRNAArg and tRNAIle genes. Formation of inclusion bodies could be avoided by drastically lowering the expression level. Amino-terminal modification by a six-histidine tag did not affect enzyme activity and enabled purification by metal chelate affinity chromatography. Ply3626 has an N-terminal amidase domain and a unique C-terminal portion, which might be responsible for the specific lytic range of the enzyme. All 48 tested strains of C. perfringens were sensitive to the murein hydrolase, whereas other clostridia and bacteria belonging to other genera were generally not affected. This highly specific activity towards C. perfringens might be useful for novel biocontrol measures in food, feed, and complex microbial communities. |
|
|---|
Specifically acting murein hydrolases from bacteriophages that infect C. perfringens might be such an alternative. At the end of their lytic life cycle, bacteriophages release their progeny by lysis of the host cell. Most commonly, phages do this by consecutively using two proteins encoded by dual lysis genes (40). First, small hydrophobic proteins termed holins disrupt the cell membrane and form holes, through which the endolysins then can pass (41). The endolysins are mureolytic enzymes, which directly target bonds in the peptidoglycan (40). The result of their activity is the destruction of the cell and the release of the newly produced virions. Besides lysis from within, endolysins from phages of gram-positive hosts are also able to quickly lyse the bacteria when they are applied exogenously (18). Recently, the potential for using streptococcal phage lysins to control pathogenic bacteria in situ has been demonstrated (12, 25).
In this study, we characterized the dual lysis system of C. perfringens bacteriophage
3626, and we cloned and expressed the genes in Escherichia coli. Experimental evidence was obtained which demonstrated the function of Hol3626. We were able to produce and purify recombinant Ply3626 endolysin, and we found that the endolysin specifically lyses C. perfringens cells.
|
|
|---|
phage and for generation of lysogens. |
View this table: [in a new window] |
TABLE 1. Bacterial strains, bacteriophages, and plasmids used in this study
|
Lysis genes of
3626.
The complete nucleotide sequence of C. perfringens bacteriophage
3626 has recently become available (43). The Husar analysis package (version 4.0; http://genome.dkfz-heidelberg.de) was used for analysis of the amino acid sequences; TmHMM was used to predict probabilities for transmembrane domains of proteins (30), and HMMscan (with the Pfam database, release 5; http://pfam.wustl.edu) was used to scan for protein families (4). Both algorithms are based on the Hidden Markov model.
Cloning and functional analysis of the holin.
To study the function of the putative holin, a specialized vector system (
Sthf) was used (36). Briefly, hol3626 was amplified from purified phage DNA by PCR by using the following primers: hol3626-up (5'-ATCAGAATTCTTAATTTTCTTTTTTATTAAATCCTTCTTT-3') and hol3626-down (5'-ATCAGAATTCATGTTTAAATTTATACCAGAAGTAATAAGT-3') (EcoRI sites are underlined, and start and stop codons are indicated by boldface type). The products were cloned into the EcoRI site of 
Sthf and were packaged by using a
DNA packaging extract (Stratagene). A preliminary test for holin function was a test to determine the ability to form plaques on E. coli LE392. Single plaques were then isolated, and the identity of hol3626 was verified by sequencing (36). Purified 
Sthf::hol3626 was then used to lysogenize LE392. Growth and the lysis kinetics of the lysogenic cells in liquid cultures were monitored by measuring optical density at 600 nm (OD600). Lytic development was induced by a temperature shift from 30 to 42°C for 20 min, followed by incubation at 37°C for 120 min. Lysogens carrying native
S (
Sthf::S) served as a positive control, and lysogens carrying 
Sthf without holin served as a negative control.
Cloning of ply3626.
For cloning ply3626 into pSP72, primers PlyEcoStart (5'-ATCAGAATTCGAGGAGAAATTACTATGAAGATAGCAGAAAGAGGCGGTCATAAT-3') and PlyEcoStop (5'-ATCAGAATTCTTATATTCTTTCTAAATATTTAGCTGTAAA-3') (EcoRI sites are underlined, start and stop codons are indicated by boldface type, and a ribosome binding site is indicated by italics) were used for amplification of the endolysin gene, and purified phage DNA was used as the template. The purified PCR product was digested with EcoRI (Roche) and ligated (T4 DNA ligase; Roche) into the EcoRI site of pSP72, and reaction mixtures were transformed into E. coli JM109(DE3). For cloning into pQE-30, primers PlyBamStart (5'-TCTAGGATCCATGAA GATAGCAGAAAGAGGCGGTCATAAT-3') and PlySalStop (5'-ATAAGTGTCGACTTATATTCTTTCTAAATATTTAGCTGTAAA-3') were used. A truncated Ply 5' fragment encoding only the N-terminal 180 amino acids of Ply3626 was amplified by using PlyBamStart and PlySalMid (5'-AAGTGTCGACTTATTGTCCCCCAGCAACTTTACAAACTCC-3'), the latter of which is complementary to nucleotides 513 to 540 of ply3626 and is equipped with a stop codon. PCR products were digested with BamHI and SalI (MBI Fermentas) and ligated into pQE-30, and plasmids were transformed into E. coli JM109(pACYC-IRL10). Correct insertion and the integrity of the cloned fragments were checked by nucleotide sequencing.
Production and purification of Ply3626.
Strain JM109(DE3)(pPly3626) failed to produce enzymatically active protein upon induction of protein synthesis by addition of isopropyl-ß-D-thiogalactopyranoside (IPTG) (1 mM). In order to avoid inclusion bodies, the incubation temperature of strain JM109(pACYC-IRL10)(pHPL3626) was reduced to 21°C, and no IPTG was added. Growth was monitored photometrically (OD600) for 20 h. At regular intervals, samples of the growing cultures were taken, and total protein synthesis was documented by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). At a final OD600 of approximately 1.0, cells were harvested by centrifugation at 8,000 x g for 15 min at 4°C, and pellets were stored at -20°C overnight. After thawing, cells were resuspended in 0.02 volume of phosphate-buffered saline (pH 8.0) or in Ni-nitrilotriacetic acid (NTA) buffer (50 mM NaH2PO4, 300 mM NaCl, 5 mM imidazole; pH 8.0). Crude extracts were prepared by single passage through a French pressure cell (SLM Aminco) at 100 MPa. Debris was removed by centrifugation at 30,000 x g and 10°C for 30 min, and supernatants containing the soluble enzyme were cleared by filtration (pore size, 0.22 µm) and finally stored at -20°C.
The six-His-tagged endolysin was purified by using immobilized metal chelate affinity chromatography, as previously described (17). Individual fractions were checked by SDS-PAGE and assayed for lytic activity. Protein concentrations were determined by a modified Bradford assay (Nanoquant; Roth, Karlsruhe, Germany), and buffer exchange and concentration of the proteins were performed by using centrifugal concentrators (Fugisep Maxi; 10-kDa cutoff; Intersep Systems).
Lytic activity and substrate specificity.
A total of 48 C. perfringens strains, 30 strains of various other Clostridium species (C. absonum, C. barati, C. beijerinckii, C. bifermentans, C. botulinum, C. butyricum, C. difficile, C. fallax, C. novyi, C. pasteurianum, C. sporogenes, C. tertium, C. tetani, C. tetanomorphum, and C. tyrobutyricum), and 34 bacterial strains belonging to other genera (Bacillus cereus, Bacillus megaterium, Bacillus polymyxa, Bacillus subtilis, Bacillus thuringiensis, Bacillus weihenstephanensis, Bifidobacterium gallicum, Bifidobacterium gallinarum, Bifidobacterium ruminantium, Brochothrix thermosphacta, Campylobacter jejuni, Enterobacter cloacae, Enterobacter gallinarum, Enterococcus faecalis, Enterococcus faecium, Escherichia coli, Lactobacillus aviarius, Lactobacillus plantarum, Lactobacillus ruminis, Lactococcus lactis, Leuconostoc carnosum, Leuconostoc citreum, Leuconostoc mesenteroides, Listeria innocua, Listeria ivanovii, Listeria monocytogenes, Pediococcus pentosaceus, Salmonella enterica, Staphylococcus aureus, Staphylococcus epidermidis, Staphylococcus gallinarum, Streptococcus pyogenes, and Streptococcus thermophilus) were selected and tested for sensitivity to the recombinant phage endolysin. Cultures were grown to the early stationary growth phase (16 to 20 h), and cells were harvested from 1-ml aliquots by centrifugation and resuspended in phosphate-buffered saline (pH 7.5) to an optical density of approximately 1.0. Cell suspensions (180 µl) were used directly as substrates for the lysis assays and were mixed with 20 µl (1:10, vol/vol) of crude extract of JM109(pACYC-IRL10)(pHPL3626) in sterile, uncoated polystyrene microplates. The subsequent decrease in optical density was monitored with a Victor 1420 plate reader (Perkin-Elmer) at 37°C. Cell extract from JM109(pACYC-IRL10) was used as a negative control. In order to confirm that the recombinant enzyme is the lytic principle in assays in which lysis was observed, the experiments were repeated with affinity-purified HPL3626 (195 µl of cells mixed with 5 µl of enzyme preparation). The activity of the C-terminally truncated endolysin protein was tested by using cell extracts of JM109(pACYC-IRL)(pHPL3626
C).
|
|
|---|
![]() View larger version (22K): [in a new window] |
FIG. 1. Alignment of the amino acid sequences of Ply3626 and the gene product of open reading frame 10C (Gp10C) from C. perfringens and three amidases having other origins. The sizes of the polypeptides (in amino acids [aa]) are indicated by the scale bar at the top. The solid box indicates the N-acetylmuramoyl-L-alanine amidase domain identified by HMMscan (see text). The vertical bars indicate the extents and degrees of similarity among the different enzymes.
|
![]() View larger version (101K): [in a new window] |
FIG. 2. Synthesis of recombinant HPL3626 endolysin in E. coli JM109(pACYC-IRL10)(pHPL3626) over time and results of protein purification. Lanes 1 to 4, samples taken at different times during growth (0, 8, 14, and 20 h); lane 5, wash fraction from Ni-NTA affinity chromatography; lane 6, purified HPL3626 (Mr, 40,200) (arrow) after elution and buffer exchange. kD, kilodaltons.
|
3626) is shown in Fig. 3. Moreover, we found that HPL3626 was able to lyse all 48 tested strains of C. perfringens, although variation in the sensitivities of the different strains was observed (Fig. 3). Most of the other bacteria were not affected by the enzyme. The single exception was a strain of C. fallax, which also displayed sensitivity. Nevertheless, the lytic activity of Ply3626 seems to be generally restricted to C. perfringens. Identical results were obtained with purified HPL3626, which again demonstrated the nature of the lytic activity. In contrast, the C-terminally truncated form HPL3626
C was found to be inactive, indicating the crucial role of the C terminus for enzyme function.
![]() View larger version (38K): [in a new window] |
FIG. 3. Lysis of C. perfringens cells by exogeneously added recombinant HPL3626. See the text for an explanation. The percent decrease in optical density (OD) (y axis) over time (x axis) following addition of the enzyme to standardized cell suspensions is shown. Symbols: , lysis response of phage host C. perfringens NCTC 3110; , negative control (no enzyme added). The average cell lysis for 48 different C. perfringens strains is indicated by a line, and the standard deviations of the assays are indicated by the shaded area.
|
105 (accession number AB016282) (50% similarity over 105 amino acids), whereas a dual start motif (41) is not present in hol3626. Bioinformatics revealed that Hol3626 is a polypeptide with two highly hydrophobic amino acid sequence regions, and the results of TmHMM analysis strongly suggested that these regions function as membrane-spanning domains (MSDs) (Fig. 4B).
![]() View larger version (50K): [in a new window] |
FIG. 4. Analysis of Hol3626. (A) Amino acid sequence of Hol3626. Charged amino acid residues are indicated by plus and minus signs, and sequences with a high probability for transmembrane domains (as determined by TmHMM [see text]) are enclosed in boxes. (B) Predicted probability for MSDs (left y axis, dark grey areas) and probable cytoplasmic and extracellular regions of the polypeptide (diagonal stripes). A hydrophobicity plot (right y axis) (11) was overlaid (bold line); hydrophobic regions are in the positive area, and hydrophilic regions are in the negative area. (C) Putative topological model for Hol3626 when it is inserted into the cell membrane (CM) (see text). The grey bars indicate the membrane-spanning regions. (D) Lysis profiles following thermal induction of E. coli LE392 lysogenized with ![]() Sthf::hol3626 ( ), ![]() Sthf::S ( ), and ![]() Sthf (control without holin) ( ).
|
For functional analysis of the holin in an established background, hol3626 was cloned into a 
Sthf background (36). Recombinant 
Sthf::hol3626 was able to form normal-size plaques on E. coli LE392, apparently due to the ability of hol3626 to support R-mediated lysis in E. coli. Thermal induction of the lytic cycle of 
Sthf::hol3626 in lysogenized LE392 resulted in lysis kinetics relatively similar to those of 
Sthf::S, with a slight delay in lysis onset of approximately 15 min (Fig. 4D). Together, these results clearly demonstrated that the hol3626 gene product is the phage holin.
|
|
|---|
3626. This report is the first description of lysis functions of a clostridial virus. The genes are localized at the 3' end of the late gene region next to the lysogeny module, in a dual gene cluster. These findings are consistent with the findings for several other bacteriophages belonging to the order Caudovirales (21, 37).
We were able to experimentally demonstrate the function of the proposed holin and endolysin gene products. Holins are proteins which are thought to insert themselves into the cytoplasmic membrane and subsequently oligomerize to form unspecific lesions that permit the cognate endolysins to access the murein (41). The
3626 hol gene does not contain a dual start motif, which has an important role in S-mediated lysis timing and has been found in many other holin genes (41). However, expression in a
background showed that Hol3636 can substitute for S in R-mediated cell lysis, not only indicating that the clostridial phage holin is fully functional in E. coli but also suggesting that it contains its own intrinsic timing function. Moreover, we speculate that its mode of action might be substantially different from that of S. The primary structure of Hol3626 features two MSDs, which means that it is a novel protein among the class II holins (41). However, as mentioned above, the positive-inside rule (35) suggests that the charged domain between the MSDs might be located in the cytoplasm, which would mean that the termini are located outside (Fig. 4C). If this is true, Hol3626 has an unusual and novel topology among the extremely diverse family of holin proteins (37, 41), which certainly warrants further investigation.
Located immediately downstream of the holin gene, ply encodes the
3626 endolysin, which likely functions as an amidase. In contrast to the N terminus, the Ply3626 C terminus is unrelated to the C termini of other lytic enzymes. It is known that bacterial peptidoglycan hydrolases, particularly those encoded by phages, display a modular domain structure. They usually have at least one enzymatically active domain, linked to a corresponding cell wall binding domain, which targets the enzyme to its site of action (6, 15). It has been demonstrated that such binding domains provide recognition specificity for the hydrolases (1, 15). Since Ply3626 exhibits a highly evolved specificity for C. perfringens cell walls, it is reasonable to assume that its unique C terminus harbors a cell wall binding domain which directs the enzyme to a specific receptor found exclusively on C. perfringens cells. Loss of lytic activity in the C-terminally truncated HPL3626
C mutant (containing the isolated amidase module) also indicated the crucial role of the C terminus in lysis. Our hypothesis is supported by the similar structures and functions of two Listeria phage endolysins (15). However, it is in contrast to the findings obtained for the multidomain murein hydrolases of S. aureus phages, where up to 75% of the enzymes could be deleted, which exhibit increasing lytic activity (13, 14, 24).
The gene encoding Ply3626 was cloned and expressed in E. coli. Efficient production of native and modified (six-His-tagged) endolysin was possible only under conditions that compensated for the unusual codon composition of ply3626, due to a very low G+C content. An E. coli vector containing additional copies of the rarely used tRNA genes ileX and argU under control of a constitutive promoter recently became available (42). Although our difficulties were similar to the difficulties encountered by other researchers attempting expression of clostridial proteins in E. coli (7, 8, 42), the next hurdle in production of these enzymes (i.e., formation of insoluble inclusion bodies after induction) was unexpected. At least in our hands, this problem is rare with highly soluble, charged proteins such as cytoplasmic endolysins. Decreasing the expression level by omitting IPTG and reducing the growth temperature apparently promoted correct protein folding and solubility and therefore prevented or minimized formation of inclusion bodies. Nevertheless, further research should help us investigate the molecular and biochemical properties of Ply3626, particularly its stability and aggregation behavior.
HPL3626 exhibited stringent substrate specificity for C. perfringens cells, although some variation in lysis sensitivity was observed among the different strains. Besides C. perfringens, only C. fallax was found to be sensitive to the murein hydrolase. The latter organism is also considered a pathogen associated with cases of gas gangrene (33), albeit at a lower frequency. Most of the clostridial species tested in our study belong to a phylogenetically closely related 16S ribosomal DNA cluster, cluster I (32), which includes more than one-half of the pathogenic species (31). It is interesting that C. perfringens and some strains of C. fallax have the same type of peptidoglycan (A3
), which has an LL-diaminopimelic acid-glycine bridge to the terminal alanine of the opposite peptide chain instead of directly cross-linked meso-diaminopimelic acid, which is found in most other clostridia (27). The peptide bridges are close to the bond that is cleaved by the amidase and, besides the cell wall binding domain, are very likely to affect enzyme substrate specificity.
The phage
3626 endolysin is active on C. perfringens cells when it is added exogenously, because of the direct accessibility of the cell wall peptidoglycan from the outside. The high sensitivity to lytic enzymes under otherwise nondisruptive conditions is a feature of most gram-positive bacteria and is particularly useful when native or recombinant phage lytic enzymes are applied (12, 13, 14, 16, 19, 25). The highly specific action of Ply3626 on C. perfringens cells forms the basis for several potential applications of this enzyme, preferably as a recombinant product. One of the foremost goals for future development is to evaluate its usefulness as a novel antimicrobial additive for the control and prevention of growth of C. perfringens in poultry intestines. In such applications, it is very important not to affect organisms other than the target bacteria in order to leave the natural microbial communities undisturbed. Based on the present data, Ply3626 may fulfill this requirement. Application as a novel biopreservative in food items such as raw chicken or turkey may also be considered. The enzyme could be directly added to food or feed (12, 25), or, alternatively, it could be produced by recombinant bacteria. L. lactis has been used to produce and secret a Listeria phage amidase endolysin, which remained fully active and was able to kill L. monocytogenes cells in medium (5).
Our lysis assays were performed under standard conditions (physiological pH and ionic strength), which worked fine and made sense in the context of the applications proposed for the enzyme. However, a detailed biochemical characterization will be required at a stage when enzyme production may be scaled up and optimal conditions for storage and specific activity need to be determined.
The use of the bacteriophage itself in a therapeutic approach to control C. perfringens may be also be considered as a possible way to harness the specificity of a bacterial virus (34). However, due to its very narrow host range,
3626 would affect only approximately 22% of C. perfringens strains, and the lytic range of another C. perfringens phage is also only 8% (43). These relatively narrow host ranges would require pretherapeutic testing or pooling of a larger number of different phages. Moreover, the likely appearance of resistance and lysogenization would limit the killing potential of native, unmodified phage. On the other hand, development of resistance against the activity of bacteriophage endolysins has not been reported. This finding has been linked to the necessity of the phage not to be trapped inside the host cell and thereby targeting unique and highly conserved bonds in the cell wall (12).
The results of this study are certainly promising. However, the potential use of Ply3626 for the prevention or biological control of the pathogen C. perfringens requires further study; in particular, the function of the enzyme in a food environment and its potential function and effects in the intestines of infected poultry must be studied.
This work was supported by Danisco A/S.
|
|
|---|

S genetic background. FEMS Microbiol. Lett. 184:179-186.[Medline]
3626, which integrates into guaA and possibly affects sporulation. J. Bacteriol. 184:4359-4368.
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»