Previous Article | Next Article ![]()
Applied and Environmental Microbiology, November 2002, p. 5779-5783, Vol. 68, No. 11
0099-2240/02/$04.00+0 DOI: 10.1128/AEM.68.11.5779-5783.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
Dental Research Group, Department of Pathology and Molecular Medicine, Wellington School of Medicine and Health Sciences, University of Otago, Wellington, New Zealand
Received 12 April 2002/ Accepted 14 August 2002
|
|
|---|
|
|
|---|
Pattern analysis of carbon source catabolism with the Biolog assay (Biolog, Inc., Hayward, Calif.) to give a community-level physiological profile (CLPP), has proven useful as a simple and rapid method to compare microbial communities from low- to moderate-nutrient habitats, such as soil, water, wastewater, contaminated sites, and activated sludge (3, 6, 8). The Biolog assay for community analysis involves outgrowth of the whole ecosystem microbiota on multiple carbon substrates, each contained in a separate well with tetrazolium violet and a minimal amount of proprietary growth medium. Substrate catabolism is measured as the reduction of tetrazolium violet to a colored formazan, evaluated as an optical density (OD) greater than that in a control well that contains no substrate. This control well, however, responds to metabolism of substrates endogenous to the ecosystem. The pattern of substrate catabolism forms a metabolic fingerprint for that community. Communities from similar or disparate environments may be differentiated by cluster and dimensioning techniques.
The objective of this research was to develop a quantitative measurement of differences in the community structure of plaque biofilm microcosms by using carbon source utilization patterns in order to characterize the response to experimental modification. Dental plaques inhabit an environment high in oral fluid nutrients, requiring breakdown of complex macromolecules and, periodically, nutrients from ingested food. This generates significant levels of endogenous storage substrates within the biofilm. For application of Biolog CLPP analysis to dental plaque microcosms, we investigated a range of Biolog microplates (GP/GP2 and GN/GN2) and experimental conditions, including anaerobic incubation. Originally designed to identify gram-positive (GP/GP2) and gram-negative (GN/GN2) bacterial isolates, they contain 95 different carbon substrates and a low concentration of proprietary growth medium. GP/GP2 composition is dominated by carbohydrates (n = 41) and carboxylic acids (n = 16), GN/GN2 plates comprise predominantly carbohydrate (n = 28), carboxylic acids (n = 24), and amino acids (n = 20). Only the basal growth medium was changed between GP/GP2 and GN/GN2 plates.
Plaque biofilms were cultured from the plaque-enriched saliva of one person who had abstained from oral hygiene for 24 h. Plaques were generally grown for 24 days at 35°C in a multiplaque artificial mouth (MAM) culture system on 25-mm-diameter Thermanox coverslips (Nunc, Inc., Naperville, Ill.) as previously described (14-17, 21). A chemically defined simulated analogue of saliva, defined medium with mucin (DMM) (21), was supplied continuously at a rate of 2.5 ml/h/plaque with periodic applications of 10% (wt/vol) sucrose (at 8-h intervals as standard, with 1.5 ml delivered over 6 min). To induce increasingly frequent acidification in the biofilm, sucrose was also applied at 6- and 4-h intervals. As plaque biofilm development occurs on the coverslips, plaque bacteria slough off, accumulate in the base of the MAM chamber, and continue growing as a biofilm. This plaque, termed "base-plaque," was used for optimization experiments.
Experimental biofilm plaque (and base-plaque) was sampled following 2 to 3 weeks of growth. For each sample, an 8.0-mg/ml suspension was prepared by homogenization (Ika-UltraTurrax, Janke and Kunkel GmbH & Co., Staufen, Germany) of approximately 0.4 g (wet weight) of plaque in 50 ml of sterile deionized water for 90 s. Portions were taken for Biolog and other analyses. Each plaque suspension was inoculated (140 µl per well) into Biolog microplates.
The OD at 595 nm (OD595) in each well was recorded periodically, for up to 4 days, with a microplate reader and associated software (Benchmark; Bio-Rad Laboratories, Calif.). Biolog microplate data were normalized by average well color development (AWCD) as described by Garland and Mills (6): AWCD = [
(C - R)]/n, where C is the color production within each well (OD measurement), R is the OD value of the no-substrate control well of each plate, and n is the number of substrates (n = 95). Each blank-corrected well was then divided by the plate AWCD: (C - R)/AWCD (4, 6). To normalize the analysis, a standard AWCD of 0.5 was adopted (5). Statistical processing was performed with SAS release 8.0 (SAS Institute, Inc., Cary, N.C.). Cluster analysis by the unweighted pair-group method with arithmetic averages (UPGMA), was performed on AWCD-transformed data and evaluated as well by principal component analysis. A positive substrate response was taken to be an OD595 25% greater than that of the control well (no added substrate).
To examine the composition of microcosm plaque, serial dilutions (1:50 and then 1:100) in 1% peptone (Difco Laboratories, Detroit, Mich.) of the homogenized plaque samples prepared for Biolog assays were plated in triplicate (50-µl volumes) by using a spiral plater (model D; Spiral Biotech, Inc., Norwood, Mass.) (13, 14). The following media were used: TSBYK agar plus 5% defibrinated sheep blood (TSBYK+B) to obtain total anaerobic and aerobic CFU; MS agar (Difco) for total Streptococcus spp.; MS agar plus bacitracin (1.45 µg/ml) (MSB) for Streptococcus mutans; and Rogosa SL agar (Difco) for lactobacilli. TSBYK+B agar contains 15 g of Trypticase soy broth per liter, 18.5 g of brain heart infusion broth per liter, 1% yeast extract, 1.5% agar (all Difco), 5 mg of hemin per liter, autoclaved, and supplemented with vitamin K (4 µg/ml) and 5% defibrinated sheep blood (20). TSBYK+B-anaerobic, MSB, and Rogosa plates were incubated anaerobically for 3 days at 35°C in an atmosphere of 80% N2, 10% CO2, and 10% H2. TSBYK+B-aerobic and MS agar plates were incubated aerobically in an atmosphere of 10% CO2 in air at 35°C for 2 days. Values were expressed as ratios to the total anaerobic counts for aciduric bacteria (S. mutans plus lactobacilli) and for non-mutans total streptococci (MS agar CFU - S. mutans and lactobacillus CFU).
Biolog plate selection and incubation conditions proved crucial for differentiating plaque communities. Because dental plaque and microcosms cultured under standard conditions contain mainly strict and facultatively anaerobic bacteria, we tested the plaque metabolic response under a variety of gas conditions: aerobic, anaerobic (H2-free, Anaero Pouch; Mitsubishi Gas Chemical Co., Inc., Tokyo, Japan), and 10% CO2 in air (capnophilic conditions). An anaerobic atmosphere containing H2 directly reduces the tetrazolium violet. Recent modification by the manufacturer of Biolog GP and GN plates to the new formulations GP2 and GN2 gave different responses with microcosm plaque under the aerobic experimental conditions recommended by the manufacturer and standardized in previous soil ecosystem studies (6). The GP2 plate compared to the original GP plate yielded much lower and less frequent aerobic metabolic responses, while GN and GN2 plates had similar but not identical responses. Nevertheless, early experiments showed that variation in the metabolic responses of microcosm plaque cultured from saliva inocula of different donors was discernible with GP and GN microplates under aerobic incubation conditions (data not shown).
In communications with the manufacturer, it was indicated that a low level of nutrient medium was present in each well and that this differed in composition between the GP and GP2 plates and between the GN and GN2 plates. We observed a significant difference between GP2 and GN2 plates in plaque sample response to the same carbon substrate inoculated with the same plaque sample. O'Connell and Garland (11) have reported differences in the metabolic responses of soil and groundwater samples when tested in GN and GN2 plates. These differences are probably due to modification of the proprietary basal media by the manufacturer (2, 11).
The GP2 plates yielded the greatest metabolic response when incubated under H2-free anaerobic conditions (Fig. 1). After 54 h of anaerobic incubation, the AWCD value was eightfold greater than the AWCD under aerobic conditions and 10% CO2-in-air conditions. For the GN2 plates, aerobic incubation resulted in a better metabolic response than under anaerobic conditions and 10% CO2-in-air conditions, but the level of overall color development was much less than that observed in the anaerobic GP2 plates (Fig. 1). Biolog ECO plates, designed for community analysis and microbial ecological studies, contain three sets of 31 substrates selected for soil community analysis. Tested on microcosm plaques, a capnophilic environment, rather than aerobic conditions prescribed by the manufacturer, was necessary to obtain a reasonable Biolog pattern (data not shown).
![]() View larger version (12K): [in a new window] |
FIG. 1. Comparison of GP2 and GN2 metabolic responses (AWCD) of microcosm plaque under anaerobic (H2 free) ( ), 10% CO2 ( ), and aerobic incubation ( ) conditions.
|
Biolog GP2 anaerobic and GN2 aerobic metabolic patterns were found to be reproducible and discriminatory. There was better reproducibility of AWCD (Fig. 2A) and the number of positive wells (Fig. 2B) in triplicate GP2 plates compared to GN2 plates. The between-sample variability observed might be due principally to minor differences in the inoculum density or sample dispersion (7). For these experiments, microcosm plaque suspension densities of 8 mg/ml were based on the initial wet weight of the sample. Variation in the biomass per wet weight (17) may also account for some of the variation observed in metabolic response. Once the AWCD exceeded the threshold level of 0.5, the reproducibility of response between the plates improved considerably.
![]() View larger version (19K): [in a new window] |
FIG. 2. Reproducibility of Biolog GP2 and GN2 plates. (A) Calculated mean AWCD from triplicate GP2 ( ) and GN2 ( ) plates by using a single plaque suspension. Error bars indicate standard deviation. (B) Number of positive wells [OD595 > (OD595 of control + 25%)] from each of the triplicate GP2 and GN2 plates.
|
The utility of the Biolog GP2 plate response for discriminating between plaque microcosms was tested in an experiment in which the frequency of sucrose application was varied, which should influence metabolic properties and microbial composition (Fig. 3). Ten plaque biofilms were cultured in DMM containing 5 mM glucose, with triplicate plaques receiving 10% (wt/vol) sucrose applications at 4-, 6-, and 8-h intervals. No sucrose was supplied to one plaque. In addition to Biolog GP2 analyses, a partial cultural analysis of composition was carried out.
![]() View larger version (16K): [in a new window] |
FIG. 3. Cluster analysis of Biolog GP2 metabolic patterns from 10 microcosm plaques receiving 10% (wt/vol) sucrose treatments at 0-h (plaque 7), 8-h (plaques 8 to 10), 6-h (plaques 4 to 6), or 4-h (plaques 1 to 3) intervals (Suc. freq.). The ratio of aciduric bacteria (S. mutans and lactobacilli) and non-mutans streptococci to total anaerobic CFU (Total AN) is shown.
|
One limitation of the Biolog procedure is the amount of sample required for analysis. This assay for plaque is confined to the scaled-up amounts available from laboratory microcosms, such as those cultured in the artificial mouth, but impossible to obtain from a human mouth.
The pattern of substrate utilization obtained with the Biolog microplate system was developed to assess the similarities between microbial ecosystems in soil and related environments at low to moderate levels of substrate. The present findings show that with careful attention to incubation conditions, this analysis can be applied to measure the metabolic similarities between cultured microcosm plaques, which are dominated by anaerobes and cultured in a periodically high-nutrient environment simulating that of the oral cavity. Due to the microbial complexity of plaque, a simple quantitative measure of the degree of functional relatedness between two plaque microcosms has been difficult to establish. CLPP analysis yields quantitative measures of similarity for microbiologically complex dental plaque biofilm microcosms. A similar approach may prove useful in other high-nutrient or anaerobic microbial ecosystems where sufficient sample is available for analysis.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»