Previous Article | Next Article ![]()
Applied and Environmental Microbiology, March 2002, p. 1232-1239, Vol. 68, No. 3
0099-2240/02/$04.00+0 DOI: 10.1128/AEM.68.3.1232-1239.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
Nian-Qing Shi,3,
and Thomas W. Jeffries1,2,3*
Department of Food Science,1 Department of Bacteriology, University of Wisconsin, Madison, Wisconsin 53706,3 Forest Products Laboratory, USDA Forest Service, Madison, Wisconsin 537052
Received 23 July 2001/ Accepted 23 November 2001
|
|
|---|
|
|
|---|
The bacterial gene for D-xylulokinase (xylB) was first cloned from Escherichia coli in 1984 (26, 34). In 1989 Ho and Chang (19) reported cloning the Saccharomyces cerevisiae gene for D-xylulokinase by complementing an Escherichia coli xylB deficiency. It was also sequenced as a part of the S. cerevisiae genome project and named XKS1 (32). Of the few putative eukaryotic genes for D-xylulokinases, only the S. cerevisiae (31) and the presently reported Pichia stipitis genes have been characterized (45). The present report is the first physiological characterization of a D-xylulokinase-encoding gene from a eukaryote that uses xylose for growth and ethanol production.
Among the native xylose-fermenting yeasts, Pachysolen tannophilus, Candida shehatae, and Pichia stipitis can ferment xylose to ethanol with high yields (8, 9, 43). However, relative to glucose fermentation by Saccharomyces, these xylose-fermenting yeasts display lower ethanol production rates. Moreover, yeast xylose fermentations require low levels of aeration for optimal ethanol production (10, 15). In an attempt to overcome these problems, researchers have cloned and expressed the genes for xylose reductase (XR) and xylitol dehydrogenase (XDH) (XYL1 and XYL2, respectively) from P. stipitis in S. cerevisiae (2, 25, 47, 49). The resulting transformants can grow on xylose aerobically and produce ethanol under oxygen-limited conditions in low yield (23, 46).
The S. cerevisiae xylulokinase gene, which corresponds to XKS1 or YGR194C (32), increased ethanol and decreased xylitol production in a Saccharomyces sp. that had been engineered with P. stipitis XYL1 and XYL2 (17, 18). Richard et al. (31), along with Stevis and Ho (44), showed that XKS1 is the only route for xylulose metabolism in this yeast. Since the first report by Chang and Ho (4), others have overexpressed Saccharomyces XKS1 along with the P. stipitis genes for XR and XDH in S. cerevisiae (12, 17, 48). These efforts have enabled higher ethanol yields from D-xylose in recombinant Saccharomyces strains, but these heterologous transformants generally do not perform as well as native P. stipitis or C. shehatae (10).
It is not clear that overexpression of XKS1 is entirely beneficial. In fact, overexpression of XKS1 in a different Saccharomyces genetic background was reported to inhibit growth on D-xylulose (32). Other studies by Toivari et al. (48) and Richard et al. (31) did not confirm this finding, but Johansson et al. (24) found that overexpression of S. cerevisiae XKS1 reduced xylose consumption by 50 to 80% in S. cerevisiae transformants even while it increased the yield of ethanol from xylose, and they cautioned against unmodulated overexpression of this gene. Thus, some controversy surrounds this approach. The S. cerevisiae D-xylulokinase is also active on D-ribulose (31), whereas the P. stipitis D-xylulokinase is not (13).
The objective of our work was to clone and characterize the P. stipitis xylulokinase gene (XYL3) so that it might be used for engineering xylulose metabolism without the side activity seen with S. cerevisiae XKS1 (51).
|
|
|---|
trp1-2). Escherichia coli XL-1 Blue MRF and SOLR (Stratagene, La Jolla, Calif.) were used in conjunction with the
-ZAPII genomic DNA library of P. stipitis (28). |
View this table: [in a new window] |
TABLE 1. Strains and plasmids used in this study
|
Enzymes, primers, and chemicals.
Restriction enzymes, DNA-modifying enzymes, and other molecular reagents were obtained from New England Biolabs (Beverly, Mass.), Promega (Madison, Wis.), Stratagene (La Jolla, Calif.), and Roche Biochemical (Indianapolis, Ind.). Reaction conditions were as recommended by the suppliers. All general chemicals were purchased from Sigma (St. Louis, Mo.). Primers for PCR and sequencing were synthesized by Sigma-Genosys (The Woodlands, Tex.).
Yeast transformation.
A yeast EZ-Transformation kit (Bio 101, Carlsbad, Calif.) was used for all yeast transformations according to the manufacturer's instructions. Transformants were selected on YSC medium containing 20 g of glucose per liter. Necessary amino acids were added if required.
Cloning of P. stipitis xylulokinase gene.
Homologous segments of protein sequences from bacterial D-xylulokinases, along with other putative eukaryotic proteins having similarity to that coded by the S. cerevisiae YGR194C open reading frame, were aligned against the S. cerevisiae protein sequence to identify the highly conserved regions at the N terminus, LGFDLSTQQ and QQHGSVYWS. Primers were designed against these motifs based on a P. stipitis codon usage table (39). A 300-bp fragment was amplified by Pfu polymerase (Stratagene, La Jolla, Calif.) from the genomic DNA of P. stipitis CBS 6054 using primers 1 (5'-CTATCTTGGGTTTGATCTTTCGACC-3') and 2 (5'-GACCAGTAGACAGACCGTGCTGCT-3'). The amplicon was used as a probe to screen a
-ZAPII P. stipitis genomic DNA library (28). A total of 3 x 106 plaques were initially screened. After the tertiary screening, one plaque remained positive. The single-stranded DNA was converted to double-stranded DNA in a phagemid, pBluescript vector as described by Lu et al. (28).
DNA sequencing.
XYL3 was sequenced by using an Applied Biosystems model 371 DNA sequencer (Perkin-Elmer). Sequence analysis was performed using Genetics Computer Group sequence analysis (GCG, Madison, Wis.) and DNAman software (Lynnon BioSoft, Vaudreuil, Quebec, Canada).
Multiple alignment and phylogenetic analysis of protein sequence.
Homologues of P. stipitis xylulokinase were identified using Blast search program at the NCBI web site (http://www.ncbi.nlm.nih.gov/BLAST/). They were then aligned using ClustalW with default settings at the EBI website (http://www.ebi.ac.uk/clustalw). A phylogenetic tree was generated from the alignments using the neighbor-joining method (36). By throwing out the sequences in the gap, ambiguous parts of the alignment were excluded from the phylogenetic analysis. For bootstrap analysis, a multiple alignment was sampled 10,000 times. Bootstrap values are expressed in percentages and placed at nodes.
Plasmid construction.
Plasmids used in this study are summarized in Table 1. Plasmid DNA was isolated by QIAprep spin plasmid kit (Qiagen Inc., Chatsworth, Calif.). We isolated yeast genomic DNA using a genome DNA isolation kit (Bio 101, Vista, Calif.). PstI digestion of pX3 produced a 2.9-kbp fragment containing the XYL3 gene with its native promoter. A single-copy vector (pYS31N) was constructed by inserting the 2.9-kbp PstI-PstI fragment of XYL into the PstI site of pRS314 (42). Plasmid pRS32N (multicopy vector) was made by inserting the same 2.9-kbp fragment into the PstI site of pRS424 (6).
The disruption cassette, pYS03, was constructed by inserting a BamHI-BamHI fragment carrying P. stipitis URA3 into the BglII site located in the middle of the XYL3 open reading frame in pYS31N. The 1.2-kbp BamHI-BamHI fragment carrying URA3 was amplified from P. stipitis genomic DNA by PCR using primers 3 (5'-CGGGATCCGCTTATGTTGCATCTCAAA-3') and 4 (5'-CGGGATCCCGGAATAGGCCTCTGCTTGT-3'). The 2.9-kbp fragment containing the disruption cassette was amplified from pYS31N by PCR with primers 5 (5'-GTTGACACTCACAATGACC-3') and 6 (5'-CCGATCCATTCCTTCTTGG-3').
PCR screening of XYL3 disruptants.
Putative XYL3 disruption mutants were screened by colony PCR. Yeast colonies were lysed at 37°C for 1 h using the whole cell yeast PCR kit (Bio 101, Vista, Calif.). Primers 5 and 6 were used in the PCR screening. The resulting lysate was mixed with 200 µM deoxynucleoside triphosphates, 10 µM primers, and 1.5 mM MgCl2 to a final volume of 100 µl; then, the mixture was incubated at 95°C for 15 min. Five units of Taq DNA polymerase (Roche Biochemicals, Indianapolis, Ind.) was added to the mixture, and the reaction was performed at 95°C for 1 min, 50°C for 1 min, and 72°C for 1 min for 40 cycles, followed by 72°C for 4 min. The product was stored at 4°C.
Southern blot hybridization.
Genomic DNA preparations digested with restriction enzymes were electrophoresed in 8 g of agarose per liter. A Southern transfer was then performed by capillary action according to the method of Sambrook et al. (37). Randomly primed DNA labeling with the purified XYL3 coding region as a template generated a probe labeled with digoxigenin-11-dUTP (Roche Biochemicals, Indianapolis, Ind.). DIG Easy Hyb solution (Roche, Indianapolis, Ind.) was used for hybridization at 37°C.
Preparation of crude extracts.
S. cerevisiae and P. stipitis were grown to exponential phase in YSC medium supplemented with appropriate amino acids and nucleotides and harvested by centrifugation. The pellet was washed and suspended in the buffer (100 mM phosphate buffer, 1 mM EDTA, 5 mM ß-mercaptoethanol, pH 7.0). The suspended cells were mixed with glass beads (Sigma, St. Louis, Mo.), vortexed at the maximum rate in bursts of 30 to 120 s, and then cooled on ice for a similar period. This procedure was repeated for up to 8 min of vortexing or until microscopic examination showed >80% cell breakage. The crude extract, collected after centrifugation for 10 min at 15,000 x g, was used in the enzyme assay.
Xylulokinase and ribulokinase assays.
Xylulokinase and ribulokinase activities were measured according to the method of Shamanna and Sanderson (38). For the P. stipitis xylulokinase assay, another blank without pyruvate kinase and lactate dehydrogenase was used to minimize the interference of xylitol dehydrogenase activity in P. stipitis. We used a photodiode array spectrophotometer (Hewlett Packard, Wilmington, Del.) to monitor the reaction by absorbance at 340 nm. All assays were performed within 2 to 4 h of cell breakage. Control homogenates with protease inhibitor cocktail (Sigma, St. Louis, Mo.) did not show significant differences in activity. Our assay could detect 0.001 U/mg of protein. One unit of activity is defined as the amount of enzyme that phosphorylates 1 µmol of xylulose per min at 30°C. Protein concentration was determined by the BCA method (Pierce, Rockford, Ill.).
Analytical methods.
Glucose, xylose, xylitol, xylulose, and ethanol concentrations were determined by high-pressure liquid chromatography (HPLC) (HP, Wilmington, Del.) with an Ion 300 column (Interaction Chromatography, San Jose, Calif.). The variance was approximately 5% in replicate samples. For the gas chromatography-mass spectrometry (GC-MS) analysis, fermentation samples were concentrated by rotary evaporation, dissolved with pyridine, and converted into a trimethylsilyl derivative. Gas chromatography (Finnigan, Austin, Tex.) with a ZB-5-MS column (Phenomenex) was used with the following conditions: 100°C for 1 min, then increasing to 300°C at 20°C/min. Cell growth was monitored by optical density at 600 nm (OD600). One OD600 unit was equivalent to 0.17 g of cells/liter for S. cerevisiae and 0.21 g of cells/liter for P. stipitis.
Nucleotide sequence accession numbers.
The sequences of the coding region and 5'- and 3'-flanking regions were deposited in GenBank (AF127802 and AAF72328).
|
|
|---|
![]() View larger version (46K): [in a new window] |
FIG. 1. Alignment of xylulokinase sequences from several bacteria and eukaryotes against the P. stipitis XYL3 sequence. Highly conserved sequences are in bold. Sequences used for primer design are underlined.
|
-ZAPII genome library of P. stipitis CBS 6054. After three rounds of screenings, a positive clone was identified and confirmed by Southern blots. This 5.3-kbp clone was named pX3.
XYL3 sequence analysis.
The XYL3 sequence (GenBank accession no. AF127802 and AAF72328) from pX3 contained an open reading frame of 1,872 nucleotides, coding for a polypeptide of 623 amino acids with a total calculated molecular mass of 69,198 Da, which agreed well with the previous result (71 kDa) from a P. stipitis xylulokinase purification study (13). Sequence analysis of the 900 bp 5' to the open reading frame identified three putative TATA elements located at -180 to -188, -286 to -294, and -335 to -342.
A phylogenetic analysis showed that the P. stipitis D-xylulokinase protein had diverged significantly from the 16 other known yeast, bacterial, plant, and animal xylulokinases (Fig. 2). The XYL3 open reading frame was only 28% identical at the DNA level to its nearest neighbor, S. cerevisiae D-xylulokinase XKS1 (YGR194C) (19, 32), while at the amino acid level, the P. stipitis xylulokinase displayed 44% identity to the S. cerevisiae homologue. The P. stipitis xylulokinase protein belongs to the FGGY, FGGY family of carbohydrate kinases (Prosite PDOC00408), which includes D-xylulokinase (EC 2.7.1.17), L-xylulokinase (EC2.7.1.53), glycerol kinase (EC 2.7.1.30), glucokinase (EC 2.7.1.12), and L-fuculokinase (EC 2.7.1.51) (30).
![]() View larger version (44K): [in a new window] |
FIG. 2. Phylogenetic tree of P. stipitis xylulokinase protein homologues found in GenBank. Homologues of xylulokinase were identified by Blast search, and found protein sequences were then aligned. A phylogenetic tree was generated from the aligned regions after excluding sequences creating gaps.
|
![]() View larger version (34K): [in a new window] |
FIG. 3. Construction of XYL3 gene disruption cassette and confirmation of XYL3 disruption by PCR and Southern blotting. (A) Systematic representation of the disruption cassette (pYS03). The linear disruption cassette was amplified by PCR from pYS03. It was then introduced into the chromosome by gene replacement. The pYS03 contains 1.2 kbp of the P. stipitis URA3 gene in the middle of the XYL3 coding region. (B) PCR with specific primers for amplification of the 1.7-kbp XYL3. The templates were used as follows: lane 1, markers; lane 2, P. stipitis FPL-UC7 genomic DNA; lane 3, P. stipitis FPL-YS30 genomic DNA. (C) Southern blot analysis of XYL3 disruption with the probe made from the XYL3 coding region. The genomic DNAs from P. stipitis FPL-UC7 (lane 1) and P. stipitis YS30 (lane 2) were digested with XmnI. The parental strain, P. stipitis FPL-UC7, showed a 2.2-kbp band and the XYL3 disruptant, P. stipitis FPL-YS30 (xyl3::URA3), showed a 3.4-kbp band. Positions of size markers are shown to the left.
|
The frequency of site-specific integration of the disruption cassette into the P. stipitis chromosome was low. Only 4% of the Ura+ transformants were true disruptants and showed slower growth phenotypes on xylose. This frequency was in line with our previous disruption studies of the P. stipitis ADH (5) and CYC1 (40) genes.
Growth experiments on various carbon sources.
Because xylulokinase belongs to a family that includes glycerol kinase and because there are structural similarities between xylulose and fructose, we tested FPL-YS30 for growth on fructose or glycerol as a sole carbon source (Fig. 4). FPL-YS30 showed extremely slow growth on D-xylose, but growth on the other carbon sources was comparable to that of the parental strain.
![]() View larger version (59K): [in a new window] |
FIG. 4. Growth of the parental and xyl3::URA3 disruptant strains on various carbon sources. (A) P. stipitis FPL-UC7 (ura3); (B) P. stipitis FPL-YS30 (xyl3::URA3). YP medium (10 g of yeast extract, 20 g of Bacto peptone, and 20 g of agar per liter) with 20 g of each carbon source per liter was used, and cells were serially diluted. Approximately 104 cells were spotted in the undiluted (top) droplet.
|
![]() View larger version (23K): [in a new window] |
FIG. 5. Fermentation of xylose by P. stipitis FPL-UC7 (ura3) (A) and P. stipitis FPL-YS30 (xyl3::URA3) (B). Cells were cultured in YPX with 40 g of xylose per liter, with an oxygen transfer rate of 5.3 mM h-1. Symbols: , xylose; , xylulose; , xylitol; , cell density; , ethanol. Results in A and B are each from a single representative trial.
|
In vitro xylulokinase and ribulokinase assays of P. stipitis FPL-UC7 and P. stipitis FPL-YS30.
P. stipitis FPL-YS30 could grow slowly on xylose. However, our enzyme assays from the culture of the XYL3 disruptant could not detect D-xylulokinase activity. By contrast, a control culture of the parental strain, FPL-UC7, showed xylulokinase activity of 0.24 U/mg under the same conditions. Assays performed with and without protease inhibitor did not show significant differences in activity. The specific activity of D-ribulose was unaltered in the mutant and was approximately 0.07 U/mg of protein for FPL-UC7 and 0.11 U/mg of protein for FPL-YS30.
XYL3 is actively expressed in S. cerevisiae under the native XYL3 promoter.
We confirmed the function of the XYL3 gene product by heterologous expression in S. cerevisiae. A 2.9-kbp PstI-PstI fragment containing 900 bp of 5' untranslated region and 200 bp of 3' untranslated region in addition to the D-xylulokinase coding region was subcloned into a CEN/ARS-based (pYS31N) or a 2µm-based vector (pYS32N). Both plasmids were introduced into S. cerevisiae 679, and transformants were selected on YSC-glucose medium without tryptophan. After growing the cells in YSC-glucose medium, we measured xylulokinase activities in the crude extracts from the 679[pYS31N] centromeric and 679[pYS32N] 2µm-based strains as well as the parental strain. The 679[pYS31N] and 679[pYS32N] strains showed much higher xylulokinase activities (0.019 ± 0.002 U/mg and 0.121 ± 0.008 U/mg, respectively) than the parental strain, which did not have detectable activity. We also observed that xylulokinase activity in the extract from the cells bearing the 2µm-based vector, 679[pYS32N], were sixfold higher than that from cells bearing the centromeric vector, 679[pYS31N].
Xylulose fermentation by recombinant S. cerevisiae.
S. cerevisiae naturally ferments D-xylulose, a keto-isomer of xylose, but it uses xylulose at one-tenth the rate it uses glucose (52). Xylulose phosphorylation has been discussed as a possible rate-limiting step in xylose fermentation by recombinant S. cerevisiae (17). We tested whether XYL3 expression can enhance xylulose fermentation by S. cerevisiae under respirofermentative conditions (oxygen transfer rate, 5.3 mM O2/h). For the xylulose fermentation experiment, a mixture of xylose and xylulose was used.
S. cerevisiae 679[pYS31N] and 679[pYS32N] used the D-xylulose about three times faster than the parental strain transformed with the control vector, pRS424, which carries TRP1 without the XYL3 insert (Table 2). The parental strain consumed only a fraction of the available D-xylulose and produced no ethanol during entire fermentation trials (Fig. 6A), whereas both recombinant strains carrying XYL3 completely utilized the added 20 g of D-xylulose per liter within 6 days and produced ethanol from D-xylulose (Fig. 6B and C). The maximum ethanol concentration observed was 4.0 g/liter in the transformant bearing the single-copy vector (679[pYS31N]) and 2.8 g/liter in the case of the transformant bearing the multicopy vector (679[pYS32N]). Even though we saw a sixfold increase in D-xylulokinase activity in the strain bearing the multicopy plasmid, this strain showed a slight decrease (ca. 15%) in the volumetric uptake rate of D-xylulose and a moderate decrease (ca. 30%) in volumetric ethanol production compared to the strain bearing a single-copy vector. The specific xylulose consumption rates of the two strains were comparable (0.61 and 0.62 g of xylulose per g of cells per h, respectively).
|
View this table: [in a new window] |
TABLE 2. Growth and fermentation characteristics between host and recombinant strains during xylulose fermentation
|
![]() View larger version (22K): [in a new window] |
FIG. 6. Fermentation of xylose-xylulose mixture by (A) parental strain (S. cerevisiae 679) transformed with the multicopy control vector pRS424 and recombinant S. cerevisiae carrying the XYL3 gene in the single-copy vector pYS31N (B) or the multicopy vector pYS32N (C). Cells were cultured in YSC medium with xylose-xylulose, with an oxygen transfer rate of 5.3 mM O2 h-1. Symbols: , xylose; , xylulose; , xylitol; , cell density; , ethanol. Results in A, B, and C are each from a single representative trial.
|
|
|
|---|
The amino acid sequence deduced from the open reading frame of XYL3 had all five sequence motifs, phosphate 1 (residues 17 to 22), connect 1 (residues 304 to 310), phosphate 2 (residues 323 to 327), adenosine (residues 527 to 529), and connect 2 (residues 559 to 563), that are found in the ATP-binding pattern as defined from the multiple sequence alignment of the known members of the sugar kinases, actin, and hsp70 class (3). Especially, the invariant GT in phosphate 2, which is present only in sugar kinases, was also found in the deduced protein sequence of XYL3.
The FPL-YS30 xyl3::URA3 disruptant could grow on xylose, but only at a much lower rate than its parent, FPL-UC7 (ura3). On the other hand, the mutant produced no ethanol from xylose. We did not expect it to use xylose at all because disruption of XYL3 should have eliminated xylulose phosphorylation. Its unexpected capacity for growth on xylose led us to consider two possibilities: the presence of a second isozyme for xylulokinase, and an alternative pathway for xylulose metabolism.
The presence of multiple isozymes is very common in yeasts and other higher eukaryotes. However, when we used the cloned XYL3 fragment to probe the genomic DNA by Southern blot, only one band was observed (Fig. 3C) and the mutant did not exhibit D-xylulokinase activity. Given the divergence of XYL3 from other known D-xylulokinases, it is possible that a second enzyme would not have been picked up in a Southern hybridization. However, because polyols, particularly arabitol, accumulated in the culture of the XYL3 disruptant, we suspect that xylulose phosphorylation can be bypassed via formation of arabinitol and ribulose (Fig. 7). This latter route was described by Shi et al. (41) through the characterization of a P. stipitis xyl2 mutant that could not use D-xylose or L-arabinose but could grow on D-arabinitol, and is further evidenced by the presence of D-arabinitol dehydrogenase in P. stipitis (16) and by the reported production of ribitol from xylose by P. stipitis strains blocked with respiration inhibitors (22). Eliasson et al. (11) reported that S. cerevisiae engineered to overexpress XKS1 also secretes arabinitol, but it is unclear how that observation is related to the current findings.
![]() View larger version (26K): [in a new window] |
FIG. 7. Proposed bypass of D-xylulose metabolism through D-arabinitol and D-ribulose.
|
This route is not functional in S. cerevisiae, because an XKS1 disruption mutant could not grow on xylulose and growth on xylulose was restored after complementation of XKS1 (32). Moreover, Blast and tblastn (http://www3.ncbi.nlm.nih.gov/BLAST/) searches of the S. cerevisiae genome did not reveal any proteins with structures similar to the D-arabinitol dehydrogenase of P. stipitis, so it is unlikely that the bypass pathway could exist in S. cerevisiae. The D-xylulokinase from S. cerevisiae is also known to possess D-ribulokinase activity (31). The P. stipitis D-xylulokinase differs in that it does not possess D-ribulokinase activity and hence is more specific for D-xylulose (13).
The XYL3 gene under its native P. stipitis promoter was actively expressed in S. cerevisiae, as shown by the observed significant increase in in vitro D-xylulokinase activity. This is similar to the observations for the native promoters for P. stipitis XYL1 and XYL2 expressed in S. cerevisiae (2, 25). We observed a copy number effect. D-Xylulokinase activity increased sixfold in the multicopy versus single-copy vector transformant, but the capacities of multi- and single-copy strains were very similar in their fermentation of D-xylulose. Ethanol production decreased with increasing copy number and increasing enzyme activity, but our results are not comparable to the deleterious effect previously observed with the overexpression of XKS1 in S. cerevisiae (32). Recombinant S. cerevisiae strains bearing XYL3 produced ethanol from a mixture of xylulose and xylose, whereas the parental strain could not. These results, along with the structural homologies to known bacterial D-xylulokinases and the absence of D-xylulokinase activity in the xyl3 disruption mutant, strongly suggest that the gene product of XYL3 is a D-xylulokinase.
This research was supported by USDA NRICGP grants 96-3550-3172 and 98-35504-6966.
Present address: Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright Patterson AFB, OH 45433, and Technical Management Concepts, Inc., Beavercreek, OH 45434. ![]()
Present address: Tate and Lyle North America, Decatur, IL 62521. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»