Previous Article | Next Article ![]()
Applied and Environmental Microbiology, July 2003, p. 3791-3797, Vol. 69, No. 7
0099-2240/03/$08.00+0 DOI: 10.1128/AEM.69.7.3791-3797.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Division of Applied Life Sciences, Graduate School of Agriculture, Kyoto University, Sakyo-ku, Kyoto 606-8502,1 Tokyo Laboratory, Yuki Gosei Kogyo Co., Ltd., Itabashi-ku, Tokyo 174-0043, Japan2
Received 10 January 2003/ Accepted 15 April 2003
| ABSTRACT |
|---|
|
|
|---|
| INTRODUCTION |
|---|
|
|
|---|
In general metabolism, there are two reactions involving 2-deoxyriobosyl groups. One of these reactions is reduction of ribonucleotide to 2'-deoxyribonuleotide during biosynthesis, and the other is cleavage of 2-deoxyribose 5-phosphate (DR5P) to produce glyceraldehyde 3-phosphate (G3P) and acetaldehyde during degradation of 2'-deoxyribonucleoside. The former reaction is regulated in a complicated fashion and is hard to handle for practical purposes (3, 4). We focused on the latter reaction for generation of a 2-deoxyribose frame and found that the reverse reactions of 2'-deoxyribonucleoside degradation are promising reactions for synthesis of 2'-deoxyribonucleoside. The proposed reaction system consists of three enzyme-catalyzed reactions in which triose phosphate, acetaldehyde, and a nucleobase are the starting materials. The enzymes involved in the system are deoxyriboaldolase (DERA), which catalyzes condensation of acetaldehyde and G3P to DR5P, phosphopentomutase (PPMase), which catalyzes intermolecular phosphate transfer from DR5P to 2-deoxyribose 1-phosphate, and nucleoside phosphorylase (NPase), which catalyzes 2'-deoxyribonucleoside formation from a nucleobase and 2-deoxyribose 1-phosphate. Generation of the deoxyribose moiety (that is, DR5P production) is the most important step in this enzymatic process.
In a previous paper, DR5P production by a strain with an active DERA, Klebsiella pneumoniae B-4-4, was described (14). This strain produced DR5P from triose phosphates (G3P and dihydroxyacetone phosphate) and acetaldehyde. If triose phosphates were supplied from glucose through glycolysis, the process became more practical. In this study, the possibility of using glucose as a starting material for DR5P production was examined with K. pneumoniae B-4-4 and Escherichia coli transformants expressing DERA from K. pneumoniae B-4-4 as sources of glycolytic enzymes. DR5P was produced from glucose and acetaldehyde by DERA-overexpressing E. coli cells in the presence of ATP.
| MATERIALS AND METHODS |
|---|
|
|
|---|
Bacterial strains and culture conditions.
K. pneumoniae B-4-4 (= IFO 16579) was used as the source of genomic DNA (14). E. coli strain JM109 and the alkaline phosphatase-defective mutant 10B5 (20) were kindly provided by Hideyuki Suzuki, Graduate School of Biostudies, Kyoto University (Kyoto, Japan). For extraction of genomic DNA, K. pneumoniae B-4-4 was cultivated in medium containing 0.5% tryptone, 0.5% yeast extract, 0.1% glucose, and 0.1% KH2PO4 (pH 7.0) at 28°C for 12 h. For production of DR5P, K. pneumoniae B-4-4 was cultivated in a medium (DR medium) containing 0.1% KH2PO4, 0.1% K2HPO4, 0.03% MgSO4 · 7H2O, 0.01% yeast extract, 0.2% NH4Cl, and 0.3% 2-deoxyribose (pH 7.0) at 28°C for 12 h. E. coli strains were cultivated at 37°C in Luria-Bertani (LB) medium (1% peptone, 0.5% yeast extract, 1% NaCl; pH 7.2) for 10 h. For cultivation of recombinant E. coli, 0.1 mg of ampicillin per ml was added to LB medium. For induction of the gene under control of the tac promoter, 0.2 mM isopropylthio-ß-galactoside (IPTG) was added to LB medium.
DNA manipulation and sequencing.
Total genomic DNA from K. pneumoniae B-4-4 was isolated and purified as described previously (16). The protocols used for plasmid isolation, agarose electrophoresis, ligation, and other standard molecular biological techniques have been described previously (18). DNA labeling with alkaline phosphate for Southern blot hybridization was carried out by using the materials and protocols of a chemiluminescence detection kit (Amersham Pharmacia Biotech, Uppsala, Sweden). Sequencing was performed by the dideoxy chain termination method by using a CEQ DTCS KIT dye terminator cycle sequencing kit (Beckman Instruments, Fullerton, Calif.) with an automated DNA sequencer (CEQ L DNA analysis system; Beckman Coulter, Inc., Fullerton, Calif.). The GENETYX software system (Software Development Co., Tokyo, Japan) was used for computer analysis of nucleotide sequences and deduced amino acid sequences.
Cloning of the DERA gene.
Oligonucleotide primers were designed based on the nucleotide sequence of the E. coli deoC gene (22). Conserved regions were selected by performing a homology analysis of several DERA genes. The primers used for PCR amplification of the partial DERA gene were 5'-GCACTGAAATTGATGGACCT-3' (sense strand) and 5'-ACCGGTAGAGGTTTTGATGAA-3' (antisense strand). The PCR mixture contained, in 50 µl of Ex-Taq buffer, 100 ng of genomic DNA of K. pneumoniae B-4-4 as a template, 100 pmol of each primer, 200 nmol of a deoxynucleoside triphosphate mixture, and 1.5 U of Ex-Taq polymerase (TaKaRa). The DNA fragment was amplified by the PCR technique by using a thermal cycler (T Gradient; Biometra, Göttingen, Germany) programmed as follows: one cycle of denaturation at 95°C for 5 min, 30 cycles of denaturation at 94°C for 1 min, annealing at 48°C for 1 min, and extension at 72°C for 1.5 min, and one cycle of extension at 72°C for 5 min. The PCR product was subcloned into the pT7Blue T vector (Novagen, Darmstadt, Germany) and sequenced as described above.
After digestion of the total DNA of K. pneumoniae B-4-4 with several restriction endonucleases, Southern blot hybridization (19) was carried out with a labeled probe. The probe was prepared from purified insert DNA extracted from subcloned plasmid DNA. The single band at approximately 1.5 kb resulting from digestion with PvuII was selected, and the PvuII-digested genomic DNA fragments were circularized by self-ligation under dilute conditions (1 µg/ml) for use as templates in inverse PCR for cloning of the whole DERA gene (13). The oligonucleotide primers were designed based on the nucleotide sequence of a partial DERA gene fragment. The primers used for inverse PCR were 5'-CATTGGTGTCATCGTCAT-3' (sense strand) and 5'-ACGTGCTGTTGAAAGTGATC-3' (antisense strand). The PCR mixture contained, in 50 µl of Ex-Taq buffer, 250 ng of circularized genomic DNA fragments, 200 nmol of a deoxynucleoside triphosphate mixture, 100 pmol of each primer, and 2.5 U of Ex-Taq polymerase. The DNA fragment was amplified by the PCR technique by using a thermal cycler programmed as follows: one cycle of denaturation at 95°C for 5 min, 30 cycles of denaturation at 94°C for 1 min, annealing at 51°C for 1 min, and extension at 72°C for 2.5 min, and one cycle of extension at 72°C for 5 min. The PCR product was subcloned into the pT7Blue T vector and sequenced as described above.
Construction of a DERA expression plasmid and expression in E. coli.
An expression plasmid (pTS8) containing the full-length DERA gene, an IPTG-inducible tac promoter, a ribosomal binding site, and a terminator was constructed. The sequence upstream of the ATG initiation codon of the DERA gene and the sequence downstream of the TAA stop codon of this gene were improved by performing PCR with chromosomal DNA of K. pneumoniae B-4-4 as the template and the following two oligonucleotide primers: 5'-GGAGAATTCAATGACTGATTTATCTGC-3' (sense strand) and 5'-CGTGAATTCTTAGTAGCTGCTGGCGCTCT-3' (antisense strand), each containing an EcoRI recognition site (underlined). The PCR product was subcloned into the pT7Blue T vector and extracted by digestion with the EcoRI endonuclease. The DNA fragment of the insert was purified by agarose gel electrophoresis and ligated into the EcoRI site of the pKK223-3 expression vector (Amersham Pharmacia Biotech), yielding plasmid pTS8. DERA expression plasmid pTS8 was then transformed into E. coli JM109 and E. coli 10B5.
Preparation and analysis of cell extracts of recombinant E. coli strains and K. pneumoniae B-4-4.
Recombinant E. coli strains were cultivated in 10 ml of LB medium containing ampicillin at 37°C for 12 h, and K. pneumoniae B-4-4 was cultivated in 10 ml of DR medium at 28°C for 10 h. The cultivated cells were harvested by centrifugation, suspended in 1 ml of 0.85% NaCl, and then disrupted by sonication with a Powersonic model 50 ultrasonic cell disrupter (Yamato Science Co., Ltd., Tokyo, Japan). After centrifugation (10,000 x g, 10 min, 4°C), the resultant supernatants were used for the enzyme assay. Protein concentrations were determined by the Bio-Rad protein assay (Bio-Rad Laboratories). Sodium dodecyl sulfate-polyacrylamide gel electrophoresis with a 12.5% polyacrylamide slab gel was performed as described previously (11) with the following standard proteins (Daiichi Chemicals Co., Tokyo, Japan): phosphorylase b (molecular weight, 97,400), bovine serum albumin (66,267), aldolase (42,400), carbonic anhydrase (30,000), trypsin inhibitor (20,100), and lysozyme (14,400).
DERA activity assay.
DERA activity in cell extracts was monitored by determining DR5P-decomposing activity. DR5P-decomposing activity was analyzed by monitoring the reduction of NADH through the coupled reactions of DERA and alcohol dehydrogenase (Oriental Yeast Co., Ltd., Osaka, Japan), which catalyzes acetaldehyde reduction. A molar extinction coefficient of 6,220 M-1 cm-1 for NADH was used to calculate the specific activity. The 200-µl reaction mixture contained 10 mM Tris-HCl buffer (pH 7.5), 0.5 mM NADH, 7.5 U of alcohol dehydrogenase, 1.0 mM DR5P, and an aliquot of cell extract. The reduction of NADH was monitored at a wavelength of 340 nm with a SPECTRA MAX 190 (Molecular Devices, Sunnyvale, Calif.).
Reaction conditions for DR5P production from acetaldehyde and G3P.
The recombinant E. coli strains were cultivated in 10 ml of LB medium containing ampicillin at 37°C for 12 h, and K. pneumoniae B-4-4 was cultivated in 10 ml of DR medium at 28°C for 10 h. The cultivated cells were harvested by centrifugation, washed with 0.85% NaCl, and then used for the reactions. The standard 100-µl reaction mixture contained 98.7 mM G3P, 200 mM Tris-HCl buffer (pH 9.0), 200 mM acetaldehyde, and 15% (wt/vol) washed cells in a 1.5-ml Eppendorf tube. The mixtures were incubated at 30°C for 5 h with shaking and then centrifuged (10,000 x g, 10 min). The amounts of DR5P in the resultant supernatants were determined as described below.
Screening of substrates that were alternatives to G3P for DR5P production.
Reactions were carried out under the standard reaction conditions with G3P and acetaldehyde as the substrates as described above with various compounds (100 mM) involved in the glycolytic pathway and glycerol metabolism instead of G3P. In the reaction with ATP (10 mM), 1% (wt/vol) xylene and 0.4% (wt/vol) polyoxyethylenelaurylamine (PL) were added to the reaction mixtures.
Reaction conditions for DR5P production from glucose and acetaldehyde in the presence of ATP.
The standard 2.0-ml reaction mixture contained 200 mM acetaldehyde, 500 mM glucose, 100 mM potassium phosphate buffer (pH 7.0), 15 mM MgSO4 · 7H2O, 1% xylene, 0.4% PL, 12.5% (wt/vol) washed wet cells of 10B5/pTS8, and 15 mM ATP in a 15-ml collection tube. The pH of the reaction mixture was adjusted to 7.5 with KOH. The mixtures were incubated at 30°C for 5 h with shaking and then centrifuged (10,000 x g, 10 min). The amounts of DR5P in the resultant supernatants were determined as described below. Optimization of the reaction conditions was carried out essentially under the standard reaction conditions described above by varying the target parameters.
Preparative production of DR5P from glucose and acetaldehyde in the presence of ATP was carried out by using a 10-ml reaction mixture containing 200 mM acetaldehyde, 900 mM glucose, 60 mM MgSO4 · 7H2O, 1% xylene, 0.4% PL, 12.5% (wt/vol) washed wet cells of 10B5/pTS8, and 100 mM ATP in a 15-ml collection tube at pH 7.5. The mixtures were incubated at 37°C with shaking. Aliquots of each mixture were removed at several times and then centrifuged (10,000 x g, 10 min). The amounts of DR5P in the resultant supernatants were determined as described below.
Production of 2'-deoxyribonucleoside.
A reaction mixture containing DR5P produced from glucose and acetaldehyde was centrifuged (10,000 x g, 20 min), and the resultant supernatant was used directly for 2'-deoxyribonucleoside production. The reaction mixture (total volume, 0.5 ml) contained the 25% (vol/vol) DR5P solution produced as described above (DR5P concentration, 25 mM), 50 mM adenine, 200 mM acetaldehyde, 0.1 mM glucose 1,6-diphosphate, 1 mM MnCl2 · 4H2O, 150 mM NH4Cl-NH4OH buffer (pH 9.0), 1.0% xylene, 0.4% PL, 0.5 U of nucleoside phosphorylase per ml, and 10% (wt/vol) washed cells of E. coli BL21/pTS17 (14). After a 4.5-h reaction at 30°C, the 2'-deoxyribonucleoside produced was analyzed by high-performance liquid chromatography as described below.
Analytical methods.
Qualitative analysis of DR5P was performed by thin-layer chromatography with Kieselgel 60 F254 (Merck, Rahway, N.J.). The developing system consisted of n-butanol, 2-propanol, and H2O at a ratio of 3:12:4 (vol/vol/vol). DR5P was detected with 1% (vol/vol) anisaldehyde and 2% (vol/vol) H2SO4 in acetic acid as a purple spot. Quantitative analysis of DR5P was performed by the chemical colorimetric procedure of the cysteine-sulfate assay described by Stumpf (21). The 2'-deoxyribonucleoside produced was measured by high-performance liquid chromatography at 254 nm with a Cosmosil 5C18-AR column (4.6 by 150 mm; Nacalai Tesque, Kyoto, Japan) by using 100 mM NaClO4 containing 0.1% (vol/vol) H3PO4 at a flow rate of 1.0 ml/min as the eluent; the temperature was room temperature.
Nucleotide sequence accession number.
The sequence of the DERA gene of K. pneumoniae studied here has been deposited in the Center for Information Biology and DNA Data Bank of Japan (DDBJ) under accession number AB099293.
| RESULTS |
|---|
|
|
|---|
An approximately 1.5-kb PvuII-digested K. pneumoniae genomic DNA fragment was selected as the template for inverse PCR by Southern blot hybridization analysis with probes prepared from the extracted insert of the subcloned plasmid. By using designed primers based on the partial DERA gene sequence and a circularized PvuII digest as the template, an approximately 1.3-kb fragment was amplified by inverse PCR. Then the PCR product was subcloned into the pT7Blue T vector in E. coli, and its nucleotide sequence was determined. The sequence comprised 1,258 bp and contained one complete open reading frame that was 780 bp long and encoded 259 amino acid residues (Fig. 1). The predicted molecular weight of the encoded DERA was 27,594.
|
|
|
|
|
Optimization of the reaction conditions for DR5P production from glucose and acetaldehyde in the presence of ATP.
By using washed cells of E. coli 10B5/pTS8 as the catalyst, the reaction conditions for DR5P production from glucose and acetaldehyde were examined. ADP, AMP, adenosine, and adenine were used instead of ATP. The amounts of DR5P produced with ADP and AMP were only 46 and 2.3% of the amount produced with ATP, respectively. DR5P was not produced with adenosine and adenine. The effect of the concentration of ATP was examined by using concentrations ranging from 50 to 500 mM. DR5P production increased with increasing ATP concentration up to 100 mM and decreased at concentrations higher than 100 mM.
The effects of the pH of the reaction mixture (in the range from pH 7.0 to 10.5) and temperature (in the range from 18 to 57°C) were examined by using 100 mM ATP. The reaction proceeded well at pH 7.5 and 37°C. The reactions were performed with 100 to 900 mM glucose. The initial rate of DR5P production increased slightly as the glucose concentration increased and was highest with 900 mM glucose. Higher concentrations of glucose might enhance G3P generation by glycolysis of E. coli cells. The effect of acetaldehyde concentration was examined by using concentrations ranging from 100 to 500 mM. DR5P production increased as the acetaldehyde concentration increased up to 200 mM and decreased with acetaldehyde concentrations higher than 200 mM.
The effects of Mg2+ and potassium phosphate buffer (pH 7.5), which are known to influence reactions involving ATP, were also examined. The effect of the MgSO4 · 7H2O concentration was examined by using concentrations ranging from 0 to 90 mM. DR5P production increased as the MgSO4 · 7H2O concentration increased up to 60 mM and decreased with MgSO4 · 7H2O concentrations higher than 60 mM. The effect of the potassium phosphate buffer (pH 7.0) concentration was examined by using concentrations of 0, 50, and 100 mM. However, the reaction proceeded well without potassium phosphate buffer.
Under the optimal reaction conditions with 100 mM ATP, 900 mM glucose, 200 mM acetaldehyde, and 60 mM MgSO4 · 7H2O, the reaction was carried out at pH 7.5 and 37°C. As shown in Fig. 5, 100 mM DR5P was produced in a 6.0-h reaction with yields of 100, 10, and 50% for ATP, glucose, and acetaldehyde, respectively.
|
| DISCUSSION |
|---|
|
|
|---|
Two DERA-expressing E. coli transformants, JM109/pTS8 and 10B5/pTS8, were constructed. 10B5/pTS8 was superior for DR5P production because of a defect in the alkaline phosphatase activity that decomposes DR5P to 2-deoxyribose. In terms of material utilization, JM109/pTS8 is also interesting. JM109/pTS8 used not only glucose metabolites for G3P generation but also glycerol metabolites. On the other hand, 10B5/pTS8 used only glucose metabolites because of a lack of glycerol-3-phosphate dehydrogenase activity (20). Addition of NAD(P)H with ATP enhanced the glycerol metabolite utilization for G3P generation by JM109/pTS8 (J. Ogawa, T. Sakai, N. Horinouchi, and S. Shimizu, unpublished data).
Use of glucose as the starting material for DR5P production was investigated with 10B5/pTS8. 10B5/pTS8 efficiently produced DR5P from glucose and acetaldehyde in the presence of ATP. This suggests that the levels of activity of the glycolytic enzymes of 10B5/pTS8 are high enough for G3P generation but that the energy required for glucose transformation is insufficient. In addition to ATP, glucose 6-phosphate, fructose 6-phosphate, fructose 1,6-diphosphate, ADP, and AMP apparently provided the energy (phosphate) for G3P generation from glucose.
Even without purification, the DR5P produced from glucose and acetaldehyde in the presence of ATP could be used for 2'-deoxyribonucleoside synthesis in the coupled PPMase and NPase reactions. This indicated that it is possible that 2'-deoxyribonucleoside can be synthesized from the simple materials glucose, acetaldehyde, and a nucleobase (Fig. 6). However, to make the process more practical, energy (ATP) should be supplied in more economical forms and recycled. Although production of DR5P from glucose requires ATP, there are some ATP-providing or -regenerating systems (for example, ATP production from adenine by Corynebacterium ammoniagenes [12] or from adenosine by a methylotrophic yeast [17] and ATP regeneration by acetate kinase [9] or by baker's yeast through alcoholic fermentation [23]) which could be coupled with DR5P synthesis from glucose and acetaldehyde via G3P. Coupling of such energy generation systems is currently under investigation.
|
| ACKNOWLEDGMENTS |
|---|
| FOOTNOTES |
|---|
| REFERENCES |
|---|
|
|
|---|
-Thymidin. Chem. Ber. 93:2777-2781.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| J. Bacteriol. | Microbiol. Mol. Biol. Rev. | Eukaryot. Cell | All ASM Journals |
|---|