Previous Article | Next Article ![]()
Applied and Environmental Microbiology, August 2003, p. 4676-4682, Vol. 69, No. 8
0099-2240/03/$08.00+0 DOI: 10.1128/AEM.69.8.4676-4682.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Departamento de Ciencias Ecológicas, Facultad de Ciencias, Universidad de Chile, Santiago, Chile
Received 18 November 2002/ Accepted 5 May 2003
|
|
|---|
|
|
|---|
As in other organisms, the condensation of two molecules of geranylgeranyl pyrophosphate (GGPP) to phytoene is the first specific step in the biosynthesis of astaxanthin. Subsequently, the pathway to lycopene involves the introduction of double bonds by four desaturations of phytoene. Finally, after cyclization of lycopene to ß-carotene, hydroxylation occurs at the 3 and 3' carbons, and keto groups are added at positions 4 and 4' of ß-rings. Recently, the phytoene desaturase-encoding gene (crtI) was isolated by heterologous complementation in an Escherichia coli strain accumulating phytoene. To do this, a cDNA library from X. dendrorhous was introduced into an E. coli strain carrying genes encoding GGPP synthase (crtE) and phytoene synthase (crtB) from Erwinia uredovora (40). By using a similar approach, the first lycopene cyclase gene (crtYB) described in a fungus was isolated from X. dendrorhous (41). The product of the crtYB gene is a bifunctional enzyme with two catalytic activities, as it converts GGPP into phytoene and lycopene into ß-carotene. A related phytoene synthase-lycopene cyclase has been cloned from other fungi belonging to the taxonomic groups ascomycota and zygomycota (6, 7, 39).
Additionally, numerous studies on the expression at the mRNA level of carotenogenic genes in ascomycetes and zygomycetes have established that expression increases in response to environmental conditions, such as blue light illumination (12, 27, 31, 33, 34). The synthesis of alternative spliced mRNAs is a well-known process in eukaryotic organisms like the fruitfly Drosophila melanogaster, the nematode Caenorhabditis elegans, and mammals (22, 26, 35). With regard to yeasts and filamentous fungi, there have been some reports of alternative splicing (8, 9, 15, 17, 37, 44, 45), but as far as we know, alternative splicing has not been described in carotenogenic genes yet. In X. dendrorhous, neither the presence of alternative spliced transcripts of carotenogenic genes nor the expression of these genes in relation to the culture conditions has been described. The main goal of this study was isolation of crtI and crtYB transcripts which could be processed in alternative spliced sites in X. dendrorhous strain UCD 67-385. Also, the levels of transcripts for both genes were determined as a function of the culture age.
|
|
|---|
Strains and plasmids.
All strains and plasmids used in this study are listed in Table 1. The atxS2 strain was obtained after treatment of UCD 67-385 with N-methyl-N'-nitro-nitrosoguanidine (40 µg/ml) under the conditions described previously (14). A highly pigmented colony was selected by visual inspection, and it was resuspended in distilled water. This suspension was plated on YM medium (2), and a highly pigmented colony, designated strain atxS2, was analyzed for carotenoid production and pigment composition. The atxS2 cultures produced about 2.230 µg of total carotenoid per g (dry weight) of yeast, and high-performance liquid chromatography analysis of carotenoids indicated that the principal pigment was astaxanthin.
|
View this table: [in a new window] |
TABLE 1. Plasmids and strains used in this study
|
X. dendrorhous growth conditions.
X. dendrorhous wild-type and mutant strains were grown in fermentor batch cultures, and samples were withdrawn from each culture at different times to collect cells for carotenoid extraction, biomass determination, and total RNA isolation. For each strain, a preculture was prepared in a 1-liter baffled flask containing 400 ml of YM medium (2) by adding 4 ml of a 2 day-culture in YM medium. All cultures were grown with shaking at 100 rpm for baffled flasks and at 150 rpm for nonbaffled flasks in an orbital shaker at a constant temperature of 22°C. A 12-liter jar fermentor (New Brunswick) containing 8.8 liters of YM medium with 450 µl of silicone antifoam agent (1520 EU; Dow Corning) was inoculated with 200 ml of a 2-day preculture of the wild-type or mutant strain. The temperature was controlled at 22 ± 1°C, and the culture was agitated at 300 rpm. Sterile air was injected at a flow rate of 8 liters/min. The antifoam agent was automatically added when it was needed. Samples for carotenoid and RNA extraction were centrifuged at 1,300 x g for 10 min to obtain cell pellets. The cell pellets were immediately frozen in liquid nitrogen and then stored at -70°C until they were processed.
Purification of total RNA from X. dendrorhous.
RNA extraction was performed by using the method described by Chomczynski and Sacchi (13) and modified for X. dendrorhous as follows. To the cellular material, 3 to 5 ml of Chomczynski solution in phenol (Ch-P solution) was added, and then 1 volume of glass beads (diameter, 425 to 600 µm; Sigma) was added. Cells were broken by shaking with a vortex at the maximum speed for 10 min. The mixture was incubated for 10 min at room temperature, and this was followed by addition of 0.2 ml of chloroform per ml of Ch-P solution with shaking and incubation at room temperature for 5 min. After centrifugation at 12,100 x g, the RNA in the aqueous phase was transferred to a sterile tube, and 1 volume of isopropanol was added. After incubation for 10 min at room temperature, the RNA was precipitated by centrifugation at 12,100 x g for 10 min at 4°C. The RNA pellet was washed with 1 ml of 75% ethanol. The RNA was resuspended in water (diethyl pyrocarbonate treated) and then stored at -20°C. The total RNA concentration was determined spectrophotometrically at 260 nm, and aliquots of the extracts were subjected to denaturing agarose gel electrophoresis to check RNA integrity.
RT.
The RNA samples were treated with 1 U of DNase I (RNase free; Roche) per µl in 2.5 mM MgCl2 for 30 min at 25°C. The reaction was stopped by addition of EDTA at a final concentration of 2.5 mM and heating at 65°C for 15 min. The RT reaction was performed in a 25-µl (final volume) mixture containing 3 µg of total RNA, 75 pmol of oligo(dT15-18), each deoxynucleoside triphosphate (dNTP) at a concentration of 0.5 mM, and 200 U of Moloney murine leukemia virus reverse transcriptase (Promega). The reaction mixture was incubated for 60 min at 42°C and then heated for 10 min at 65°C.
PCR amplification.
The sequences of all the primers used in this study are shown in Table 2, and their locations in gene sequences are indicated in Table 2 and Fig. 1. To clone crtI and crtYB cDNAs, specific primers upstream of translation initiation sites and downstream of translation termination sites were designed by using the sequences of strains CBS 6938 (accession numbers Y15007 and AJ133646, respectively) and UCD 67-385 (1, 21). PCR amplification was performed with 1 U of VentR DNA polymerase (New England Biolabs) in a 25-µl (final volume) mixture containing 2.5 µl of 10x VentR DNA polymerase buffer, 0.5 µl of a solution containing each dNTP at a concentration of 10 mM, 1 µl of a solution containing each primer at a concentration of 25 µM, 2 µl of an RT reaction mixture containing the single-stranded cDNA, and 18 µl of water. PCR was performed with a 2400 DNA thermal cycler (Perkin-Elmer) by using the following program: 95°C for 3 min, 35 cycles of 94°C for 30 s, 55°C for 30 s, and 72°C for 3 min, and a final extension at 72°C for 10 min. The PCR products were electrophoresed on 0.7 or 1% agarose gels and stained with ethidium bromide. To quantify RT-PCR products, 28 cycles of amplification were employed with annealing temperatures of 60°C for amplification of crtI cDNAs and 55°C for amplification of crtYB cDNAs. PCR amplification was performed with 2 U of Taq polymerase (Promega) in a 25-µl (final volume) mixture containing 2.5 µl of 10x Taq buffer, 0.5 µl of a solution containing each dNTP at a concentration of 10 mM, 1 µl of a solution containing 50 mM MgCl2, 1 µl of a solution containing each primer at a concentration of 25 µM, 2 µl of an RT reaction mixture containing the single-stranded cDNA, and water. All PCR amplifications were performed at least by duplicate and were standardized for the concentration of single-stranded cDNA used and the number of amplification cycles. Equal volumes containing the PCR products were loaded on 3% agarose gels containing ethidium bromide for the quantification of RT-PCR products from the crtI gene, while 4.5% polyacrylamide gels were used in the case of the crtYB gene. After agarose gel electrophoresis, the masses of the bands were quantified by using a 100-bp DNA ladder containing known concentrations of compounds (Fermentas) and Kodak Digital Science 1D image analysis software. Only those bands whose intensity was not oversaturated were used for quantification. To normalize for sample-to-sample variation due to RT and PCR efficiency, relative values were obtained by comparing the intensities of the carotenogenic gene amplification bands with the intensity of the actin (act) amplification product. The primers used for amplification of the act gene were designed by using previously described sequences (43). The level of expression of the act gene is constant throughout the yeast growth cycle.
|
View this table: [in a new window] |
TABLE 2. Primers used in this study
|
![]() View larger version (25K): [in a new window] |
FIG. 1. Structure of the genomic DNA, mmRNA, and amRNA of the crtI gene (A) and the crtYB gene (B). E, exon; I, intron; AG, alternative splicing acceptor site; GT, alternative splicing donor site. The horizontal arrows indicate the locations of the primers used in PCR, which are described in Table 2. (A) The dotted lines indicate the 80 bases of the first intron present in the crtI amRNA. (B) The dotted lines indicate the 55 bases of the first intron present in the crtYB amRNA, while the 96 bases of the second exon conserved in this transcript are highlighted. The diagram is not to scale.
|
Nucleotide sequence accession numbers.
The cDNA nucleotide sequences of the mature mRNA of the crtI gene (crtI mmRNA), the alternative mRNA of the crtI gene (crtI amRNA), the mature mRNA of the crtYB gene (crtYB mmRNA), and the alternative mRNA of the crtYB gene (crtYB amRNA) from X. dendrorhous strain UCD 67-385 have been deposited in the GenBank database under accession numbers AY177424, AY177425, AY177204, and AY174117, respectively.
|
|
|---|
2.1-kb inserts and one with a
2.0-kb insert, were determined. Comparison of these nucleotide sequences with the previously published genomic sequence revealed that one cDNA product had been synthesized from an mRNA which had conserved 80 bp of the first intron (crtI amRNA). The other cDNA insert corresponded to the mmRNA of the crtI gene without any introns (crtI mmRNA). Nucleotide sequence translation of the crtI amRNA resulted in stop codons along the entire sequence.
![]() View larger version (81K): [in a new window] |
FIG. 2. (A) Amplification of the crtI mRNA by RT-PCR with primers 1 and 5. (B) The amplification band was cloned, and ampicillin-resistant transformants had plasmids with different inserts (lanes 1 and 2). Lane M contained the /HindIII molecular size marker.
|
![]() View larger version (58K): [in a new window] |
FIG. 3. Amplification of the crtI gene with primers 3 and 8 (lanes 1, 2, 3, and 4) and with primers 4 and 8 (lanes 5, 6, 7, and 8). The substrates used for PCR were DNA of plasmid pL25 (lanes 1 and 5), DNA of plasmid pC13 (lanes 2 and 6), genomic DNA (gDNA) (lanes 3 and 7), and RT reaction products (lanes 4 and 8). Lanes M contained the 29/HindIII DNA ladder.
|
Expression of crtI and crtYB messengers as a function of the age of the culture.
X. dendrorhous strains UCD 67-385 and atxS2 (atxS2 was an astaxanthin-overproducing mutant derived from the wild type) were grown in fermentor batch cultures, and the levels of crtI and crtYB gene transcripts were determined by RT-PCR. Primers 2 and 6 were employed for analysis of the crtI mmRNA levels, while for crtI amRNA we used primers 4 and 7 (Table 1). To analyze crtYB mmRNA levels, primers 11 and 15 were used, while crtYB amRNA levels were analyzed with primers 12 and 15 (Table 1). In addition, we designed primers for amplification of the act gene, which was used as an internal standard in RT-PCR assays. The levels of crtI messengers in relation to the act mRNA level for each time point were quantified, and the ratio of crtI mmRNA to crtI amRNA (M/A ratio) was calculated. The M/A ratio decreased with the age of culture for the wild-type strain (Fig. 4A). However, the cellular concentration of carotenoids began to increase after 27 h of culture. After 13 h of growth, crtI amRNA was detectable, but the level was too low to be determined, while the level of crtI mmRNA was high enough to be quantified. This means that in the early stage of the growth cycle a high proportion of crtI RNA was processed to mmRNA, which could be translated to phytoene desaturase protein, but the level of mmRNA decreased with the age of the culture. With the atxS2 strain, the M/A ratio also decreased with the age of culture (Fig. 4B). As in the wild-type strain, the cellular concentration of carotenoids increased during the stationary phase even though the proportion of mmRNA was less than the proportion in the exponential phase.
![]() View larger version (23K): [in a new window] |
FIG. 4. Kinetics of expression of crtI mmRNA and crtI amRNA for X. dendrorhous strains UCD 67-385 (A) and atxS2 (B). The level of each crtI messenger was normalized by using the level of the act messenger. Each value is relative to the highest value of the curve (which was defined as 1). Symbols: , number of cells; , carotenoid concentration; , M/A ratio.
|
![]() View larger version (38K): [in a new window] |
FIG. 5. Amplification by RT-PCR of act mRNA, crtYB mmRNA, and crtYB amRNA of X. dendrorhous strains UCD 67-385 (A) and atxS2 (B). Total RNA samples were isolated from cells of cultures at various times (in hours), as indicated at the top of each gel. The same RT reaction mixtures were amplified with primers for the act gene and primers for the crtYB gene. The same reaction volume was loaded in each lane. In the case of the crtYB gene, the total reaction mixture was loaded.
|
|
|
|---|
Analysis of the intron positions in phytoene desaturase- and phytoene synthase-lycopene cyclase-encoding genes from fungi indicates that the first intron of these genes is located in the same relative sequence position in basidiomycetes (X. dendrorhous) and ascomycetes (Neurospora crassa and Gibberella fujikuroi) (Fig. 6). The first intron in both genes could have been acquired by the ancestor of the basidiomycetes and ascomycetes after separation of the zygomycetes, since the fungi Mucor circinelloides and Phycomyces blakeesleanus lack these introns. Additionally, a nucleotide sequence comparison of the first intron showed that the alternative splicing sites of the crtI and crtYB genes of X. dendrorhous are absent in N. crassa and G. fujikuroi (Fig. 6). Therefore, phytoene desaturase and phytoene synthase-lycopene cyclase RNAs from ascomycetes would not follow an alternative splicing pathway, as described in this study. The nucleotide sequence of the first crtI intron from strain UCD 67-385 has two mutations, C
A and T
G, compared to the nucleotide sequence of strain CBS 6938 (Fig. 6A). There are also nucleotide changes in a genomic DNA clone derived from strain UCD 67-385 (21). These mutations could be responsible for the splicing in the alternative 3' site and the high proportion of clones with alternative cDNA compared to clones with proper cDNA (16 and 12 clones, respectively). It remains to be determined whether strain CBS 6938 synthesizes a crtI amRNA and, if it does, what the proportion of alternative and productive mRNAs is.
![]() View larger version (54K): [in a new window] |
FIG. 6. Phytoene desaturase protein (A) and phytoene synthase-lycopene cyclase protein (B) from the fungi M. circinelloides (Mc), P. blakesleeanus (Pb), X. dendrorhous (Xd), N. crassa (Nc), and G. fujikuroi (Gf). The arrowheads indicate the relative positions of introns in the nucleotide sequences. In each panel alignment of the first intron for both genes is shown. Identical bases in X. dendrorhous and/or N. crassa and G. fujikuroi are shaded. The alternative splice signals inside the introns are enclosed in boxes. The asterisks indicate the C A and T G mutations in the X. dendrorhous UCD 67-385 sequence compared with the previously published sequence of strain CBS 6938 (accession number Y15007).
|
We thank Carlos Medina for discussions concerning the structure and origin of the first intron of the crtI and crtYB genes, Carlos Jerez for critical reading of the manuscript, and Antonio Jiménez for providing primers.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2010 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»