Previous Article | Next Article ![]()
Applied and Environmental Microbiology, June 2004, p. 3449-3456, Vol. 70, No. 6
0099-2240/04/$08.00+0 DOI: 10.1128/AEM.70.6.3449-3456.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
School of Pharmacy and Pharmaceutical Sciences, University of Manchester, Manchester M13 9PL, United Kingdom,1 Procter & Gamble, Cincinnati, Ohio2
Received 1 December 2003/ Accepted 20 February 2004
|
|
|---|
|
|
|---|
The antimicrobial action of QACs involves perturbation of cytoplasmic and outer membrane lipid bilayers through association of the positively charged quaternary nitrogen with the polar head groups of acidic phospholipids (17). The hydrophobic tail subsequently interacts with the hydrophobic membrane core. At concentrations normally used for application to inanimate surfaces, QACs form mixed-micelle aggregates with hydrophobic membrane components that solubilize membrane and lyse the cells (41). Lethality occurs through generalized and progressive leakage of cytoplasmic materials (21).
Reports that the hydroxydiphenylether biocide triclosan (TCS) can select for mutants of Escherichia coli that exhibit TCS tolerance (32, 42) have raised the possibility that other biocides might contribute to the emergence of resistance (16, 40). QACs have been actively deployed since the 1930s with no apparent reduction in their effectiveness (12). Numerous pure-culture laboratory studies have, however, reported apparent decreases in the susceptibility of repeatedly exposed bacteria (1, 3, 35, 38, 44). The reported changes in susceptibility are generally attributable to modification of the acidic phospholipid content of the membrane (13, 51) or the acquisition or hyperexpression of certain multidrug efflux pumps (24). The genetic determinants of insusceptibility are in some cases mobile. For example, Bjorland et al. (3) have shown that a novel plasmid-born gene, qacJ, mediates QAC resistance in various equine staphylococci.
Efflux pumps can actively remove QAC from the membrane core, thereby reducing effectiveness at sub-MICs. The multidrug efflux pumps QacA to -G, for example, contribute to biocide nonsusceptibility in Staphylococcus aureus (39), while many pseudomonads are nonsusceptible to a range of biocides by virtue of expression of efflux pumps (9, 23).
Since multidrug efflux pump expression has been associated with changes in the MICs of therapeutically important antibiotics, there is the theoretical potential for decreases in QAC susceptibility to be accompanied by potentially more serious changes in the effectiveness of clinically important antimicrobials (4, 15, 23). A number of studies, however, have reported that no such associations exist. These studies include quantification of antibiotic resistance of bacteria with acquired QAC resistance (22, 25) and surveys of large numbers of bacteria isolated from homes that use or abstain from household antibacterial products (12). Loughlin et al. (25), for example, reported that P. aeruginosa, when adapted to benzalkonium chloride, showed decreased susceptibility to other membrane-active agents but not to clinically relevant antibiotics.
The use of QACs in the home will expose a wide range of environmental and potentially pathogenic bacteria to these biocides, often at sublethal concentrations, making the home a potentially high-risk environment for resistance selection.
The aim of the present study was to investigate the impact of QAC-containing detergent (QD) on the microbial ecology and antibiotic and biocide susceptibility properties of domestic kitchen drain biofilms. Kitchen sink drain outlets are a site of considerable bacterial colonization in the home (27) and also an environment that is commonly exposed to biocides at sublethal concentrations (28).
The effect of repeated QAC exposure on the susceptibility of numerically important culturable drain bacteria was studied in pure culture. Effects of QAC exposure on biofilm communities were then investigated with a drain biofilm microcosm previously characterized and validated for stability and utility (27). These microcosms have previously been used to model the effects of TCS exposure in the home (28) and of biocide exposure of dental plaque communities (29, 30). Differential plate counts and culture-independent methods (denaturing gradient gel electrophoresis [DGGE]), in conjunction with sequencing (31), were used to characterize the developed communities and the effects of QD exposure therein. MICs of the biocides cetrimide; chloro-3,5-dimethylphenol, chlorhexidine, and TCS and the antibiotics chlortetracycline, ciprofloxacin, erythromycin, fusidic acid, penicillin, and vancomycin were determined against the numerically dominant aerobic and facultative clones isolated both from control microcosms and following 3 months of continuous QD exposure.
|
|
|---|
The following bacteria, isolated from a domestic kitchen sink drain biofilm by methods previously described (27), were used: Aeromonas hydrophila MBRG 4.3, Aeromonas sp. strain MBRG 4.2, Ralstonia sp. strain MBRG 4.13, Aranicola proteolyticus MBRG 20.1, Stenotrophomonas maltophilia MBRG 4.17, Pseudomonas sp. strain MBRG 4.7, Eubacterium sp. strain MBRG 4.14, Chryseobacterium sp. strain MBRG 4.29, Achromobacter xylosoxidans MBRG 4.31, Pseudomonas nitroreducens MBRG 4.6, Enterococcus saccharolyticus MBRG 20.4, Chryseobacterium sp. strain MBRG 4.28, Bacillus cereus MBRG 4.21, Citrobacter sp. strain MBRG 20.9, Sphingobacterium multivorum MBRG 30.1, Pseudoxanthomonas sp. strain MBRG 40.1, and Microbacterium phyllosphaerae MBRG 4.30. Overnight batch cultures of these isolates (20 µl) were deposited in radial lines across the plates.
After incubation, growth observed near the endpoint in the transition area was aseptically removed and transferred to the next QAC gradient plate at the same concentration. This process was continued until 14 passages had been completed. After 7 (P7) and 14 (P14) QAC passages, the bacteria were archived at 70°C for subsequent MIC and minimal bactericidal concentration (MBC) testing.
Domestic drain microcosms.
Domestic drain microcosms were established as described previously (27, 28). Briefly, drain biofilm (2.5 g) was macerated with a sterile mortar and pestle and diluted 1:10 in sodium phosphate buffer (22.5 ml, 0.1 M, pH 6.5) containing 0.45% (wt/vol) NaCl which had been prereduced (boiled for 5 min and cooled under a constant stream of anaerobic gas [5:95 CO2/N2 ratio]). The samples were homogenized for 1 min in a flask shaker (Griffin, London, England) in the presence of approximately five glass beads (3.5 to 5.5 mm; BDH, Poole, United Kingdom). The diluted material from samples was used to inoculate two constant-depth film fermentors (CDFFs). Initially, short-term microcosms were established to study the lethality of QD. For these experiments, growth medium was continuously added to the fermentors by a peristaltic pump (Gilson) at a rate of 5 ml/h. The components of the medium intended to simulate dish washing water were as follows (grams per liter): starch, 1.0; peptone, 0.5; tryptone, 0.5; yeast extract, 0.5; NaCl, 1.0; margarine (Flora; Unilever, Crawley, United Kingdom), 0.05; hemin, 0.001; tomato ketchup (Heinz, Uxbridge, United Kingdom), 0.05. For long-term microcosm studies, the fermentors were inoculated a total of twice 7 days apart with additional resampled, homogenized, but undiluted drain biofilm. Anaerobiosis was maintained for the first 48 h by continuous gassing with oxygen-free gas (5:95 CO2/N2 ratio) at 1 liter/h, and the temperature was uncontrolled (the ambient laboratory temperature ranged from 18 to 24°C). Biofilms were shielded from light by covering the CDFFs with aluminum foil shrouds. Throughout, the microcosms were maintained on a feast-famine regimen (four times daily 20-min perfusion, 0.5 ml/min, of synthetic dishwater) as described above but supplemented with domestic detergent (Fairy Original; Procter & Gamble, Newcastle Upon Tyne, United Kingdom) at 0.05 g/liter.
Discontinuous feeding regimens were controlled with programmable electronic timers (Micromark, London, United Kingdom). In order to model more accurately the open nature of a domestic sink drain, the fermentor pans were continuously wetted with untreated tap water (1 ml/h). CDFFs enable the continuous culture of biofilms at accurately set depth (26-31, 37). In all cases, the biofilm (Teflon plug) depth was set at 5.0 mm. Developed communities were characterized periodically over the course of the investigation, immediately by culture, and samples were archived for subsequent DGGE.
Addition of QD to microcosms.
For short-term lethality studies, dilutions of a QAC-containing detergent (Lysol all-purpose cleaning liquid [Reckitt and Colman Inc., Wayne, N.J.]) were added to established drain microcosms by a peristaltic pump for 10 min at 6-h intervals at a flow rate of 55.2 ml/h. For long-term studies, duplicate microcosms were stabilized for 6 months, after which the Lysol liquid was substituted for the domestic detergent in the artificial dishwater supplied to one at 0.2% (wt/vol) for 3 months.
Bacterial characterization by culture.
Drain biofilm material (1.0 g) or CDFF plugs (two) were macerated with a sterile mortar and pestle, homogenized, and diluted 1:10 (as described above). For enumeration, dilutions of macerated drain or model biofilm (1:10) were serially diluted with prereduced half-strength peptone-water (7.5 g/liter). During long-term experiments, in order to minimize variation due to sampling of immature biofilms, only those CDFF pans that had been in situ for at least 1 month were removed for analysis. Aliquots (0.1 ml) of appropriate dilutions were plated in triplicate onto a variety of selective and nonselective media (Oxoid, Basingstoke, United Kingdom) as follows: Wilkins-Chalgren agar (anaerobic and facultative heterotrophic counts), R2A (aerobic and facultative heterotrophic counts), pseudomonas isolation agar with C-N selective supplements (Pseudomonas aeruginosa), and MacConkey agar no. 3 (enteric organisms).
Plates were incubated for up to 5 days, both aerobically and in an anaerobic cabinet (atmosphere, 10:10:80 H2-CO2-N2). Criteria used for selecting bacterial populations for use as markers of population change in the biofilm communities included numerical dominance, ease of selective cultivation, and visual recognition. Morphologically distinct colonies were subcultured and archived (60°C) for subsequent identification on the basis of morphology, oxidase test, Gram reaction, and rRNA gene sequencing.
Direct bacterial cell counts.
The proportion of the viable bacterial communities that could be cultured by the methods used was estimated by comparison with vital staining and direct microscopy. A subsample (100 µl) of the 102 or 103 dilution (prepared for viable-count determination) was stained with a live-dead bacterial viability kit (BacLight; Molecular Probes, Leiden, The Netherlands) and counted with an improved Neubauer counting chamber in conjunction with fluorescence microscopy with a 100-W mercury vapor lamp. Live (green fluorescent) and dead (red fluorescent) cells were visualized separately with fluorescein and Texas red band-pass filters, respectively, in accordance with the manufacturer's instructions.
Antimicrobial susceptibility of isolated drain bacteria.
Stock solutions (4 mg/ml) of the following compounds were prepared as indicated by the manufacturers, in deionized, distilled water: penicillin V, erythromycin, chlorhexidine, ciprofloxacin, fusidic acid, vancomycin, and DMP. TCS and chlortetracycline were dissolved in 25% ethanol. All solutions were sterilized by filtration through cellulose acetate filters (0.2-µm pore size; Millipore) and stored at 70°C. A model CU spiral plater (Spiral Systems) was used for spiral gradient MIC endpoint determinations. Stock solutions (50 µl) of the antimicrobial compounds were then deposited onto the agar surface with the variable cam of the spiral plater, as described above, to establish a concentration gradient covering a 1,000-fold dilution series (50). Control plates comprised identical agar plates with no added antimicrobial. Plates were dried for up to 1 h at room temperature prior to deposition of inoculate along the spiral track with the uniform cam of the spiral plater, After further drying (1 h), plates were inverted and incubated aerobically overnight at 37°C. The radial location of the growth endpoint from the center of the spiral was measured with calibrated calipers. MICs were determined on the basis of inhibition zones with the equation P = (RP x DF)/(h x SR), where P (potency) is the effective antimicrobial concentration at the interface between growth and inhibition (micrograms per milliliter), RP is the original antimicrobial concentration deposited (micrograms per milliliter), DF is the deposition factor, h is the agar height (millimeters), and SR is the surface ratio.
Community DNA extraction.
Archived biofilm material (0.2 to 0.5 g) was mixed with 1 ml of Tris buffer (0.12 M, pH 8.0), vortex mixed, and subjected to two cycles of freezing and heating (60°C for 10 min, 60°C for 2 min). Samples were then transferred to a bead beater vial containing 0.3 g of sterile zirconia beads (0.1-mm diameter). Tris-equilibrated phenol (pH 8.0; 150 µl) was added, and the suspension was shaken three times for 80 s at maximum speed (Mini-Bead-Beater; Biospec Products, Bartlesville, Okla.). After 10 min of centrifugation at 13, 000 x g, the supernatant was extracted three times with an equal volume of phenol-chloroform and once with chloroform-isoamyl alcohol (24:1 [vol/vol]). The DNA was precipitated from the aqueous phase with 3 volumes of ethanol, air dried, and resuspended in 100 µl of deionized water. The amount and quality of DNA extracted were estimated by electrophoresis of 5-µl aliquots on a 0.8% agarose gel and by comparison to a molecular weight standard (stained with ethidium bromide). DNA extracts were stored at 60°C prior to analysis.
PCR amplification for DGGE analysis.
The V2-V3 region of the 16S rRNA gene (corresponding to positions 339 to 539 of Escherichia coli) was amplified with the eubacterium-specific primers HDA1-GC (5'-CGC CCG GGG CGC GCC CCG GGC GGG GCG GGG GCA CGG GGG GAC TCC TAC GGG AGG CAG CAG T-3') and HDA2 (5'-GTA TTA CCG CGG CTG CTG GCA C-3') as previously described (49). The reactions were performed in 0.2-ml tubes with a DNA thermal cycler (model 480; Perkin-Elmer, Cambridge, United Kingdom). In all cases, reactions were carried out with Red Taq DNA polymerase ready mix (25 µl; Sigma, Poole, Dorset, United Kingdom), HDA primers (2 µl of each, 5 µM), nanopure water (16 µl), and extracted community DNA (5 µl). Optimization studies, as described by Muyzer et al. (34), showed that extracted community DNA required a minimum of a 1:10 dilution to ensure reliable PCRs. Quantification and standardization of extracted DNA were achieved with a fluorescence assay (DNA Quantitation Kit; Sigma), in accordance with the manufacturer's instructions. The thermal program was as follows: 94°C (4 min), followed by 30 thermal cycles of 94°C (30 s), 56°C (30 s), and 68°C (60 s). The final cycle incorporated a 7-min chain elongation step (68°C).
DGGE analysis.
Biofilm samples were analyzed by DGGE with a D-Code universal mutation detection system (Bio-Rad, Hemel Hempstead, United Kingdom). Polyacrylamide (8%) gels (16 by 16-cm, 1 mm deep) were run with 1x TAE buffer diluted from 50x TAE buffer (40 mM Tris base, 20 mM glacial acetic acid, 1 mM EDTA). Initially, separation parameters were optimized by running PCR products from selected pure cultures of drain bacteria and PCR amplicons from extracted drain DNA on gels with a 0 to 100% denaturation gradient, perpendicular to the direction of electrophoresis (a 100% denaturing solution contained 40% [vol/vol] formamide and 7.0 M urea). Denaturing gradients were formed with two 10% acrylamide (acrylamide/bisacrylamide ratio, 37.5:1) stock solutions (Sigma). On this basis, a denaturation gradient for parallel DGGE analysis ranging from 30 to 60% was selected for community analyses. DNA for loading onto gels was quantified and, when necessary, standardized between samples, with a fluorescence assay (see above). Electrophoresis was carried out at 150 V and 60°C for approximately 4.5 h. All gels were stained with SYBR Gold stain (diluted to 104 in 1x TAE buffer; Molecular Probes, Leiden, The Netherlands) for 30 min. Gels were viewed and images were documented with a BioDocit system (UVP).
Sequencing of bacterial isolates and excised gel bands.
For analysis of the major resolved DGGE amplicons, selected resolved bands were cut out of the polyacrylamide gels with a sterile scalpel under UV illumination and incubated at 4°C for 20 h together with 20 µl of nanopure water in nuclease-free universal bottles. Portions (5 µl) were removed and used as a template for a PCR identical to that outlined for DGGE analysis. PCR products were purified with QIAquick PCR purification kits (Qiagen Ltd., West Sussex, United Kingdom) and sequenced with the reverse (non-GC clamp) primer (HDA2). The sequencing was 94°C (4 min) followed by 25 cycles of 96°C (30 s), 50°C (15 s), and 60°C (4 min). Once chain termination was complete, sequencing was done in a Perkin-Elmer ABI 377 sequencer. DNA sequences were compiled with GENETOOL LITE 1.0 (DoubleTwist.com) to obtain consensus sequences, or to check and edit unidirectional sequences. For excised DGGE band PCRs, the presence of a GC clamp upon sequence analyses confirmed that the correct target had been reamplified, rather than a contaminant.
Phylogenetic identification of DGGE amplicons.
BLAST searches were performed, with each compiled sequence, against those in the European Molecular Biology Laboratories (EMBL) prokaryote database. Closest relative species were assigned on the basis of compiled partial 16S rRNA gene sequence comparisons with BLAST against sequences in the EMBL database.
Chemicals.
Bardac (a commercial twin-chain dimethyl ammonium chloride) was obtained from Lonza Group. Lysol disinfectant, whose active ingredients (at 2.7% [vol/vol]) are dimethyl benzyl ammonium chlorides with chain lengths of C14 (50%), C12 (40%), and C16 (10%), is manufactured by Reckitt and Colman. Formulated bacteriological media were purchased from Oxoid. TCS (Irgasan DP300) was obtained from Oils and Soaps Ltd., Bradford, United Kingdom. Unless otherwise stated, all other chemicals and antimicrobial agents were obtained from Sigma.
Statistical analyses.
Individual MIC measurements for randomly isolated bacteria before and after 3 months of QD exposure were grouped as total bacteria and arranged in distribution tables. These data were then subjected to
2 analysis with a Microsoft Excel macro.
|
|
|---|
Effect of repeated QAC exposure of isolated drain bacteria.
Susceptibility data (MICs and MBCs) for 17 drain biofilm isolates, determined before and after 7 and 14 QAC passages, are shown in Table 1. On the basis of MIC determinations, marked (more-than-twofold) decreases in QAC susceptibility occurred for Ralstonia sp., A. proteolyticus, and Chryseobacterium sp. Similar MBC increases occurred for Chryseobacterium sp. and S. multivorum. Interestingly, QAC exposure caused marked increases in susceptibility for E. saccharolyticus, Citrobacter sp., Pseudoxanthomonas sp., and M. phyllosphaerae. This probably relates to cellular injury. Previous pure-culture laboratory investigations have reported similar alterations in susceptibility for a variety of biocidal compounds and many types of test bacteria (10, 25, 33, 38). Few papers, however, have reported an increased frequency of QAC resistance in organisms isolated from highly exposed environments. For example, a recent study examined 60 households, half of which were defined as heavy biocides users and half of which were not, and no association was found between QAC use and resistance (12).
|
View this table: [in a new window] |
TABLE 1. MICs and MBCs for selected domestic drain isolates before and after repeated exposure to a commercial QACa
|
![]() View larger version (26K): [in a new window] |
FIG. 1. Bioburdens, direct counts, and viable counts of selected groups of drain bacteria in the simulator before and during product addition. Data are means ± standard deviations from two separate sample pans. The schedule of QD addition is shown. Graphs show 5 days prior to dosing and then successive 2-day exposures to 0.2, 1.0, 10, and 50% QD. Symbols for LIVE/DEAD counts: , total counts; , dead-cell counts.
|
![]() View larger version (105K): [in a new window] |
FIG. 2. Negative image of a parallel DGGE gel showing community fingerprints for drain microcosm samples before QD addition and after 2-day exposures to QD at 0.2, 1.0, 10, and 50% (vol/vol).
|
|
View this table: [in a new window] |
TABLE 2. Characterization of dynamic changes in microcosms on the basis of sequences of dominant PCR amplicons derived from DGGE gels at baseline and during escalating QD exposure
|
2 analysis demonstrated that no statistically significant shifts in susceptibility distributions occurred for total bacteria toward any of the antimicrobials tested. This contrasts with the pure-culture data, where repeated QAC exposure caused some changes in QAC susceptibility in certain test bacteria (Table 1). There are several possible reasons for this apparent anomaly. Data in Table 3 demonstrate that up to 25% of the bacteria within unexposed microcosms were nonsusceptible to QAC (cetrimide). Bacteria that are innately nonsusceptible will not decrease in susceptibility under any circumstances. In terms of hitherto susceptible bacteria, it is possible that protection from QAC lethality conferred by the biofilm phenotype (18), as evidenced by data in Fig. 1, reduced the selective pressure. The level of QAC exposure used in these investigations, and also in most domestic kitchens, is also likely to have been below the MICs for many of the susceptible test bacteria. The possibility of biocide binding or inactivation will further reduce these effects. With respect to extrapolation from the pure-culture susceptibility changes to in situ community effects, environmental bacteria may rarely encounter selection pressures as strong as those that can be artificially created in the laboratory. In addition, the level of QD exposure in these studies, although similar to that used in the home, may have been below the normal MICs for many of the susceptible species. Another possibility is that where susceptibility changes did occur, fitness costs may have caused these lineages to be outcompeted, although there is little evidence to support this theory (26). |
View this table: [in a new window] |
TABLE 3. Distribution of bacterial drug susceptibilities in the microcosm before and after 3 months of QD exposurea
|
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»