Previous Article | Next Article ![]()
Applied and Environmental Microbiology, June 2004, p. 3664-3672, Vol. 70, No. 6
0099-2240/04/$08.00+0 DOI: 10.1128/AEM.70.6.3664-3672.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
Laboratory of Microbiology, Department of Biochemistry, Physiology and Microbiology, Ghent University, Ghent, Belgium
Received 27 November 2003/ Accepted 9 February 2004
|
|
|---|
|
|
|---|
In a previous study, contamination of a gelatin production process with a variety of gram-positive and gram-negative bacteria was reported (6). However, extreme temperature and pH conditions during the manufacture, ultrahigh-temperature (UHT) treatment, and drying of the gelatin extracts should guarantee the microbial sterility of the end product. Nevertheless, quality control testing at gelatin-producing factories has indicated that thermotolerant, aerobic, endospore-forming bacteria may persist in the final product (Paul Stevens, personal communication).
In general, contamination of industrial plants and products with aerobe endosporeformers is a widespread problem. The ubiquitous occurrence of these bacteria in combination with their wide nutritional versatility and wide pH and temperature ranges for the growth and formation of endospores, which are much more resistant to heat, chemicals, irradiation, and desiccation than vegetative forms (22), makes this group of bacteria an ever-present problem in different industries (see, e.g., references 3 and 10). Bacillus licheniformis, members of the Bacillus cereus group, Bacillus coagulans, Bacillus fumarioli, Bacillus badius, Bacillus subtilis, Brevibacillus agri, Alicyclobacillus acidocaldarius, and Paenibacillus cookii were found to be contaminants in a Belgian gelatin production process (6).
The bacterial load is expected to be greatly reduced in semifinal gelatin extracts. These extracts are subjected to harsh conditions during production and a final UHT treatment. Different semifinal extracts are mixed according to their individual physicochemical and microbiological characteristics to a final product according to the requirements of the consumer. Since there are no further procedures that diminish the bacterial contamination after the semifinal-extract stage, the bacterial load at this stage is of great concern. Indeed, some of these contaminants may be pathogenic for humans and could be a threat to human health in food and pharmaceutical applications. Furthermore, contaminants may exhibit gelatinase activity. Enzymatic degradation of gelatin would affect the viscosity and therefore the quality of the product itself and its applications. Further processing of contaminated gelatin batches in food and other industries could lead to the enrichment of contaminants to unacceptable levels and thus products of low quality and safety. In order to preserve the technical properties of gelatin, the UHT treatment step cannot be extended and decontamination temperatures cannot be increased to completely prevent the survival of bacterial spores.
To address the problem of end product contamination, the present study aimed to isolate, characterize, and identify bacterial contaminants in semifinal gelatin extracts. A better insight into the diversity and identities of these contaminants may provide information on the actual hazards of this contamination to the quality and/or safety of gelatin and lay a foundation for more targeted detection methods. Contaminants were isolated from gelatin batches from six production plants: three in France, one in Belgium, one in North America, and one in Argentina. These batches were suspected of being contaminated with thermotolerant bacteria based on the results of quality control testing at the producing plants involving plating on a broad-range medium and growth at elevated temperatures. Gelatin batches of bovine and porcine origins that were extracted from bones and skin and produced by different extraction approaches were selected for isolation studies. Repetitive-element PCR (rep-PCR) was used for the first screening of isolates. Representatives of the different rep-PCR fingerprint types were selected for further identification by 16S ribosomal RNA gene (rDNA) sequencing. Although the 16S rRNA gene is generally used as a framework for modern bacterial classification, it often shows limited variation for the discrimination of closely related taxa (7). Protein-coding genes exhibit higher genetic variation, which can be used for the classification and identification of closely related taxa (see, e.g., references 4 and 33). Sequencing of the gyrA and rpoB genes has been found to be useful in discriminating species of the Bacillus subtilis group (4, 17), while the gyrB gene has been studied for the discrimination of members of the Bacillus cereus group (33). Therefore, based on a first identification obtained with 16S rDNA sequencing, the affiliation of selected groups was further studied by gyrA and rpoB sequencing or by species-specific gyrB-targeted PCR. In addition, the gelatinase activities of selected isolates were examined.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Details on
the origins of and extraction process used for gelatin batches included
in this study
|
16S rDNA sequencing.
Amplification and sequencing
reactions were performed as described previously
(12). The sequencing
primers used were 5'-CTCCTACGGGAGGCAGCACT-3'
(forward primer, corresponding to positions 339 to 358
according to Escherichia coli numbering),
5'-AACTCAAAGGAATTGACGG-3'
(forward, positions 908 to 926),
5'-AGTCCCGCAACGAGCGCAAC-3'
(forward, positions 1093 to 1112),
5'-ACTGCTGCCTCCCGTAGGAG-3'
(reverse, positions 358 to 339),
5'-GTATTACCGCGGCTGCTG-3' (reverse,
positions 536 to 519), and
5'-GTTGCGCTCGTTGCGGGACT-3'
(reverse, positions 1112 to 1093). An ABI 3100 automated DNA
sequencer (Applied BioSystems) was used according to the
manufacturer's instructions. The FASTA program
(18) was applied to find
the most similar sequences from the EMBL
database.
PCR with species-specific gyrB primers.
PCR
with primers targeting the gyrB gene specific for Bacillus
cereus (BC1
[5'-ATTGGTGACACCGATCAAACA-3',
positions 490 to 510] and BC2r
[5'-TCATACGTATGGATGTTATTC-3',
positions 834 to 854]), Bacillus anthracis
(BA1 [5'-AATCGTAATATTAAACTGACG-3',
positions 607 to 627] and BA2r
[5'-CCTTCATACGTGTGAATGTTG-3',
positions 831 to 851]), or Bacillus
thuringiensis (BT1
[5'-ATCGGTGATACAGATAAGACT-3',
positions 175 to 195] and BT2r
[5'-CCTTCATACGTATGAATATTATTT-3',
positions 519 to 542]) was performed. Primer positions
were determined by using Bacillus cereus ATCC 14579 (accession no. AE016877),
Bacillus anthracis strain Ames (accession no. AE016879), or
Bacillus thuringiensis IAM 12077 (accession no.
AF090331)
gyrB numbering. The reactions were carried out with a
25-µl reaction mixture containing 25 pmol of each primer, 5
nmol of each deoxynucleoside triphosphate, 2.5 µl of
10x PCR buffer (Applied BioSystems), 0.5 U of Taq
polymerase (Applied BioSystems), and 50 ng of template DNA. The PCR
profile consisted of 30 cycles of denaturation at 94°C for 1
min, annealing at 58°C for 90 s, and extension at
72°C for 150 s and a final extension at 72°C
for 7 min. The resulting amplicons were examined by electrophoresis on
a 1% agarose gel.
Partial sequencing of the rpoB and gyrA genes.
An rpoB fragment
corresponding to Bacillus subtilis rpoB positions 6 to 585 was
PCR amplified by using primers rpoB-f
(5'-AGGTCAACTAGTTCAGTATGGAC-3')
and rpoB-r
(5'-AAGAACCGTAACCGGCAACTT-3'). A
gyrA fragment corresponding to Bacillus subtilis gyrA
positions 43 to 1070 was PCR amplified by using primers gyrA-f
(5'-CAGTCAGGAAATGCGTACGTCCTT-3')
and gyrA-r
(5'-CAAGGTAATGCTCCAGGCATTGCT-3').
The reactions were carried out with a 50-µl reaction
mixture containing 20 pmol of each primer, 10 nmol of each
deoxynucleoside triphosphate, 5 µl of 10x PCR-buffer
(Applied BioSystems), 1 U of Taq polymerase (Applied
BioSystems), and 50 ng of template DNA. The PCR profile consisted of
denaturation at 94°C for 2 min; 40 cycles of denaturation at
94°C for 30 s, annealing at 51°C for
45 s, and extension at 68°C for 50 s (or
60 s for the gyrA gene); and a final extension at
68°C for 90 s (or 10 min for the gyrA gene).
The resultant amplicons were purified with the NucleoFast 96 PCR system
(Millipore) and sequenced in both directions by using the same primers.
Sequencing was performed with an ABI 3100 automated DNA sequencer
(Applied BioSystems) according to the manufacturer's instructions.
Phylogenetic analysis was performed with CLUSTAL W
(28) and TREECON software
(31).
Gelatinase tests.
The gelatinase
activity of the isolates was investigated by two different tests. In
the first test, performed with tubes, a small amount of cells of a pure
culture was inoculated into 5 ml of medium consisting of (wt/vol)
0.25% yeast extract, 0.5% Bacto Peptone, 0.5%
glucose, 0.1% MgSO47H2O, and
12% gelatin suspended in 0.02 M phosphate buffer (pH 7)
(0.3% KH2PO4 and 1%
Na2HPO412H2O). After
incubation for 1 week at 37°C, gelatinase activity was revealed
as liquefaction of the medium after an extra 24 h of
incubation at room temperature. The second test, performed with plates,
was based on the method described by Smibert and Krieg
(23). Bacterial cells
were streaked as a single line across the center of a plate with
nutrient agar supplemented with 1.2% gelatin. After incubation
for 1 week at the optimal growth temperature, the medium was overlaid
with a 10% HCl-15% HgCl2 solution. A
clear zone around the growth of the bacteria indicated gelatinase
activity.
|
|
|---|
Repetitive-element genomic fingerprinting.
To cope with
this large set of isolates, rep-PCR was used as a first screening
method. Rep-PCR is a relatively rapid DNA fingerprinting technique that
is known to discriminate bacterial isolates at the intraspecific level
and potentially up to the strain level
(32). Moreover, rep-PCR
has been shown to be a useful technique in the subtyping of
Bacillus species
(9). Therefore, we assumed
that isolates displaying the same banding pattern in terms of the
presence or absence of bands, and thus showing the same fingerprint
type, are highly related. The (GTG)5 primer was
applied as in a previous study
(6); the use of this
primer generated sufficiently complex banding patterns attributable to
Bacillus or related genera for all analyzed strains. Hence, as
could be expected, a banding pattern was also obtained for all 1,129
isolates studied here. Since the main goal of this study was to
characterize and identify gelatin isolates at the species level and
since rep-PCR is expected to discriminate at least at this level, we
selected representative strains for each of the fingerprint types to
unravel species affiliation. In total, 63 representative isolates were
selected, and their rep-PCR banding patterns are shown in Fig.
1. Gelatin batches from which strains displaying this banding pattern were
isolated are indicated. Some fingerprint types were found in several
plants.
![]() View larger version (36K): [in a new window] |
FIG.1. Normalized
rep-PCR patterns of representative gelatin isolates and their
identification and isolation sources. 16S rDNA sequencing was performed
for all representative isolates as a first identification tool. Members
of the Bacillus cereus group and the Bacillus
subtilis group were further identified based on protein-coding
genes. The identification of Bacillus cereus was based on the
use of species-specific gyrB-targeting primers. For
Bacillus amyloliquefaciens and Bacillus subtilis,
identification was based on partial gyrA sequencing. The
identification of Bacillus licheniformis was based on
gyrA and rpoB sequencing. The identification of
Bacillus sonorensis was based on rpoB sequencing. For
each identification, the number of different batches in which the
species was found is given in parentheses next to the species. A
representative isolate is an isolate representative of a specific
banding pattern. The isolation source is the gelatin batch from which
strains displaying the corresponding rep-PCR banding pattern were
isolated.
|
|
View this table: [in a new window] |
TABLE 2. 16S rDNA
sequences determined in this study
|
Since strains identified as Bacillus licheniformis, Bacillus subtilis, and members of the Bacillus cereus group on the basis of 16S rDNA sequencing (Table 2) are frequent contaminants in gelatin (Fig. 1) and their identification on the basis of 16S rDNA sequence analysis is not satisfactory, we applied other methods for these groups of isolates to obtain more reliable species identification.
Identification of Bacillus cereus group members.
Yamada et al.
(33) designed
species-specific primer sets for the selective amplification of
Bacillus cereus, Bacillus thuringiensis, and
Bacillus anthracis gyrB sequences. We applied these
species-specific primer sets for further identification of gelatin
isolates preliminarily identified as a members of the Bacillus
cereus group on the basis of 16S rDNA sequencing (Table
2). For each of these
strains, a typical 365-bp PCR product was generated with the
Bacillus cereus-specific primers, while with Bacillus
thuringiensis- and Bacillus anthracis-specific primers no
typical species-specific products like those described by Yamada et al.
(33) were obtained. Based
on these data, all gelatin isolates attributed to the Bacillus
cereus group based on 16S rDNA sequencing may now be regarded as
Bacillus cereus
strains.
Identification of Bacillus subtilis group members.
Chun and Bae
(4) demonstrated the use
of gyrA sequences for accurate classification of Bacillus
subtilis and related taxa, including Bacillus
amyloliquefaciens, Bacillus vallismortis, Bacillus
mojavensis, Bacillus atrophaeus, and Bacillus
licheniformis. Therefore, we performed gyrA sequencing of
gelatin isolates preliminarily identified as Bacillus
licheniformis or Bacillus subtilis on the basis of 16S
rDNA sequencing (Table 2).
Cluster analysis of these gyrA sequences with those from the
study of Chun and Bae (4)
is shown in Fig.
2. All isolates identified as Bacillus licheniformis on the basis
of 16S rDNA sequencing grouped with Bacillus licheniformis
strains when gyrA sequences were used. Three strains (R-20280,
R-19973, and R-19966) that were identified as Bacillus
subtilis based on 16S rDNA sequencing clustered with Bacillus
subtilis subsp. subtilis strains, while others (R-19060,
R-19930, R-19964, and R-19954) grouped most closely with Bacillus
amyloliquefaciens strains.
![]() View larger version (25K): [in a new window] |
FIG. 2. Rooted
neighbor-joining tree constructed by using partial gyrA
sequences of gelatin isolates (indicated with an "R-"
number) attributed to species of the Bacillus subtilis group
based on 16S rDNA sequencing among strains from the study of Chun and
Bae (4). Bootstrap values
(expressed as percentages of 1,000 replications) of >60%
are shown at branch points. Accession numbers are given in parentheses.
The tree was rooted by using the gyrA sequence of
Bacillus sp. strain C125 (AB010081) as an outgroup. The scale
bar indicates 0.1% nucleotide substitutions. B.,
Bacillus.
|
![]() View larger version (20K): [in a new window] |
FIG. 3. Rooted
neighbor-joining tree constructed by using partial rpoB
sequences of gelatin isolates (indicated with an "R-"
number) attributed to Bacillus licheniformis based on 16S rDNA
and gyrA sequencing among strains from the study of Palmisano
et al. (17). Bootstrap
values (expressed as percentages of 1,000 replications) of
>60% are shown at branch points. Accession numbers are
given in parentheses. The tree was rooted by using the rpoB
sequence of Bacillus subtilis LMG 7135T (AJ586566)
as an outgroup. The scale bar indicates 0.1% nucleotide
substitutions. B.,
Bacillus.
|
Gelatinase tests.
At least one
representative strain of each rep-PCR fingerprint type was examined for
its gelatinase activity. With the exception of Bacillus
thermoamylovorans strain R-19047 and all tested Geobacillus
stearothermophilus strains, all strains expressed gelatinase
activity.
|
|
|---|
As expected, the majority of isolates were identified as members of Bacillus or related endospore-forming genera. These strains were attributed to Bacillus cereus, Bacillus coagulans, Bacillus fumarioli, Bacillus amyloliquefaciens, Bacillus licheniformis, Bacillus pumilus, Bacillus sonorensis, Bacillus subtilis, Bacillus gelatini, Bacillus thermoamylovorans, Anoxybacillus contaminans, Anoxybacillus flavithermus, Brevibacillus agri, Brevibacillus borstelensis, or Geobacillus stearothermophilus.
Except for Bacillus sonorensis, Bacillus thermoamylovorans, Bacillus gelatini, Brevibacillus borstelensis, and the Anoxybacillus species, which were isolated with only one type of extraction process at only one gelatin production plant, all species were found to be contaminants in different types of extraction processes at more than one production plant. Bacillus licheniformis was found in all types of gelatin extracts included and at all production plants. Also, Bacillus fumarioli was found to be a frequent contaminant, as it was isolated from gelatin batches from all production plants except the Argentinian plant. The frequent isolation of Bacillus fumarioli from gelatin is remarkable, as the only other habitat known for Bacillus fumarioli is geothermal soil (16). Non-endospore-forming species, such as Enterobacter and Staphylococcus species, were found in only a very limited number of samples. Non-endospore-forming bacteria are not expected to survive the gelatin production process, and contamination may be a result of the handling of UHT-treated batches.
Some of the species found (e.g., Bacillus cereus and Bacillus licheniformis) are known to exhibit pathogenic properties, which are of great concern to human health, especially in food and pharmaceutical applications of gelatin. Bacillus cereus has been shown to contaminate food-processing plants and, because of its pathogenic potential, constitutes a public health hazard (2, 14). Bacillus licheniformis has been shown to be a frequent contaminant of industrial processes (see, e.g., references 19, 24, and 30). Although this organism is exploited industrially for the large-scale production of enzymes, its generally-recognized-as-safe status is a subject of debate (21). Processing of contaminated gelatin batches in the food and pharmaceutical industries may lead to unacceptable levels of these species in the corresponding end products.
Bacillus coagulans has frequently been reported to be a contaminant and spoiling organism of milk products, vegetables, and fruits (see, e.g., references 5 and 15), and processing of contaminated gelatin in foods may thus affect shelf lives.
All species isolated from semifinal gelatin extracts except Bacillus thermoamylovorans and Geobacillus stearothermophilus were found to encompass strains exhibiting gelatinase activity. Enzymatic degradation of gelatin affects the viscosity and therefore the quality of the product itself and its applications. Moreover, because of this degradation, essential nutrients may become available for gelatinase-negative contaminants, promoting their growth.
In this study, we have shown that thermotolerant, aerobic, endospore-forming bacteria assigned to Bacillus, Anoxybacillus, Brevibacillus, and Geobacillus species contaminate the semifinal product of a gelatin extraction process. Some of these species have known pathogenic traits, and the majority of these species include strains exhibiting gelatinase activity. These findings clearly raise concerns about the safety and quality of gelatin and its applications, especially since more effective sterilization conditions, such as an extension of the UHT treatment or an elevation of the sterilization temperature would also affect the technical properties of gelatin. Currently, quality control tests used in gelatin production plants rely on classical bacteriological methods to assess bacterial contamination in the end product. Although these methods are standardized and often incorporated in a well-founded quality management system and hence are generally accepted among consumers, they show limitations. First, because these methods rely on bacterial growth, they are time-consuming and may cause prolonged delivery terms. Second, when limited numbers of selective growth media and phenotypic tests are used, these methods yield inadequate information concerning species identity. Consequently, the actual hazards of observed contaminations and suitable remediation procedures to be taken are not straightforward. A fast and sensitive detection method for the most important contaminants in terms of prevalence and/or pathogenicity, as indicated by this study, would help gelatin producers in the distribution of a safe and high-quality product.
We thank Renata Coopman, Stefanie Hubeau, and Katrien De Ridder for excellent technical assistance.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»