Previous Article | Next Article ![]()
Applied and Environmental Microbiology, April 2005, p. 1798-1802, Vol. 71, No. 4
0099-2240/05/$08.00+0 doi:10.1128/AEM.71.4.1798-1802.2005
Laboratory of Clinical Infectious Diseases, National Institute of Allergy and Infectious Diseases, National Institutes of Health, Bethesda, Maryland
Received 1 September 2004/ Accepted 27 October 2004
|
|
|---|
alb1 mutant strains and the bluish-green colonies of wild-type strains. ATMT with a T-DNA-containing alb1 disruption construct resulted in 66% albino transformants. Southern analysis revealed that 19 of the 20 randomly chosen albino transformants (95%) were disrupted by homologous recombination. These results suggest that ATMT is an efficient tool for transformation, random insertional mutagenesis, and gene disruption in A. fumigatus. |
|
|---|
As genomic sequencing of A. fumigatus is in its final stages, identification of potential virulence genes can be more rapidly assessed. Investigation of the functions of such genes can be accomplished via mutational analysis either by reverse or forward genetic approaches. Transformation of fungi with DNA that does not possess homology with the fungal genome results in random integration into the fungal genome and can cause gene disruption as an insertional mutagen. A decisive advantage of insertional mutagenesis over chemical or radiation mutagenesis is that the mutated genes are tagged by the transforming DNA (T-DNA), which can be used to identify the disrupted genes. Although recombinational analysis by classical genetics is not possible in A. fumigatus, the corresponding wild-type genes can be disrupted by homologous integration of a knockout construct to confirm its function.
To disrupt a gene by homologous integration in A. fumigatus, transformation via the spheroplast method has been most widely used; this is a laborious and time-consuming method, and the homologous recombination frequency can be relatively low (3). Electroporation and biolistic methods were also used to transform A. fumigatus; these methods, however, resulted in a high frequency of multiple integrations and a low frequency of homologous recombination (3). As an alternative method, Agrobacterium tumefaciens-mediated transformation (ATMT) has been used to transform several Aspergillus species such as Aspergillus niger, Aspergillus awamori, and Aspergillus giganteus (5, 10, 13). de Groot and colleagues used A. tumefaciens to deliver T-DNA containing a hygromycin resistance gene into conidia as well as spheroplasts of A. awamori (5). The transformation frequency via ATMT was significantly higher in comparison to frequency with the traditional method, regardless of whether conidia or spheroplasts were used for transformation. Most of the transformants obtained by ATMT contained a randomly integrated single T-DNA copy. Homologous integration via ATMT was also accomplished in A. awamori. The frequency of homologous recombination with T-DNA containing the pyrG gene of A. awamori was higher compared to results with conventional transformation methods (10). A comparison of ATMT with biolistic, electroporation, and spheroplast methods showed that ATMT is superior to the other methods for the transformation of A. giganteus. The transformation frequency was enhanced, and all the transformants contained a randomly integrated single copy of T-DNA (13). In contrast, ATMT was described as being less efficient than conventional transformation methods for A. niger (5). Here we report transformation of A. fumigatus mediated by Agrobacterium tumefaciens as a tool for insertional mutagenesis as well as for gene disruption.
|
|
|---|
Plasmid construction.
The plasmid used for ectopic mutagenesis, pDHt/hph, was constructed by insertion of a 2.7-kb HindIII/SacI fragment from pAN7 containing the hygromycin resistance gene (hph) (16) into the HindIII/SacI-restricted pDHt/SK plasmid. pDHt/SK is a gift from Seogchan Kang (Pennsylvania State University) and is derived from the plasmid pDHt (14) by inserting a 0.8-kb HpaI/StuI fragment from pGreenII between the two PvuII sites in pDHt. Gene disruption by homologous recombination was performed with the plasmid pDHt/alb1::hph. This plasmid was constructed by inserting a 7.2-kb SacI/ApaI fragment from pRGD12 (17), which contained the hph gene flanked by alb1 sequence, into the SacI/ApaI-restricted plasmid pDHt/SK (Fig. 2A). Agrobacterium tumefaciens strain EHA105 was transformed by electroporation (6) with pDHt/hph or pDHt/alb1::hph plasmids. Strains of Agrobacterium harboring pDHt/hph and pDHt/alb1::hph were named EHA105A and EHA105B, respectively.
![]() View larger version (41K): [in a new window] |
FIG. 2. The alb1 gene disruption via ATMT. (A) Schematic representation of the alb1 native gene, the disruption construct, and the disrupted locus. The deleted fragment of alb1 (filled black line), the fragment used as the probe for Southern analysis (gray line), and the hygromycin resistance cassette (hatched line) are indicated. An asterisk indicates the destroyed restriction sites. Triangles represent left- and right-border repeats in the T-DNA. (B) Southern hybridization of 20 randomly chosen albino transformants. AvrII-restricted DNA was probed with the alb1 wild-type gene. (C) RT-PCR of alb1 transcript in albino mutants. Lane 1, B-5233 genomic DNA; lane 2, RNA derived from B-5233; lanes 3 to 11, RNA derived from transformants H6 through H14. The 232-bp fragment is the PCR product of ß-tubulin.
|
DNA analysis.
Conidia were inoculated into yeast nitrogen base, (Difco, Sparks, Md.), supplemented with 0.5% glucose, and grown on a shaker (200 rpm) at 37°C for 24 h. DNA extractions from hyphae and Southern hybridizations were carried out as previously described (17). SpeI-restricted DNA from transformants with random insertions was probed with the 32P-labeled pAN7 plasmid. In the case of alb1-targeted disruption, AvrII-restricted DNA from albino transformants was probed with an alb1 fragment amplified from the template pks33 (14) by using the primers ALB9 (GATCTGGAATCGTCCGTGTT) and ALB10 (C CCTGGAGAAGAATCGAGGT). For reverse transcription PCR (RT-PCR), total RNA was isolated from albino conidia as described (17). RT-PCR with a One-Step RT-PCR kit (QIAGEN, Valencia, Calif.) was performed according to the manufacturer's protocol. Specific primers used were INT3.1 (ATGGAGTGGCTCTTACGCCAT) and INT4.1 (ATCTTTCGAGCCAGCGCTTG). Since the amplicon contains two introns in the genomic DNA, the wild-type DNA template (positive control) produced a fragment 120 bp larger than the one observed with the total RNA. Tubulin primers were added to the reaction mixture as a control for the amount and quality of RNA. Tubulin primer sequences were as follows: for ß-tubulin2F, AAAGGTCTCATCTGCGTGCT; for ß-tubulin2R, GGCGGAGAGCTGTGACTATC.
|
|
|---|
Contact between recipient and Agrobacterium is an essential prerequisite for the T-DNA transfer. A solid substrate allows the recipient and Agrobacterium to grow in close proximity so that the T-DNA can be transferred. Three different filters (nitrocellulose, cellulose, and nylon) were tested as substrates for cocultivation of A. fumigatus and Agrobacterium tumefaciens. The best results were obtained with nylon and cellulose filters (Fig. 1A). Although nitrocellulose filters are most commonly used as the substrates for cocultivation of Agrobacterium and filamentous fungi for ATMT (5), our results with A. fumigatus indicate that nitrocellulose is not as efficient as nylon or cellulose filters (data not shown). The reason for this difference is unclear. It is possible that the chemical properties of these membranes may affect the distribution of the Agrobacterium cells and conidia or inhibit their interaction, thereby resulting in differences in transformation efficiency. Initially, conidia and Agrobacterium were cocultivated at 28°C for 72 h. The number of transformants was low under these conditions, averaging 10 transformants per 107 conidia. The cocultivation temperature was then lowered to 24°C for the first 16 or 26 h, followed by incubation at 28°C for 24 h. The results showed that extending the incubation time at 24°C led to higher numbers of transformants (Fig. 1A). When the cocultivation time at 24°C was extended to 48 h without further incubation at 28°C, over 100 transformants per 107 conidia were obtained. This was approximately a fourfold increase compared to the number of transformants from shorter incubations at 24°C (Fig. 1A). Although 28°C is optimal for growth of A. tumefaciens, this temperature was not appropriate for T-DNA transfer. It has been proposed that the T-DNA transfer machinery is greatly affected by temperature. For example, the expression of some vir genes of Agrobacterium that are necessary for interaction between the bacteria and the recipient is impaired at temperatures above 26°C, thus affecting the transformation efficiency (2, 8).
![]() View larger version (40K): [in a new window] |
FIG. 1. A. fumigatus transformation frequency by ATMT method. (A) Agrobacterium and conidia were cocultivated on either a nylon (gray bars) or cellulose (white bars) filter at 24°C for the indicated time period, followed by further incubation at 28°C for 24 h. Cocultivation on nylon (black bar) was at 24°C for 48 h without subsequent incubation at 28°C. (B) Southern analysis. DNAs of A. fumigatus transformants were digested with SpeI and hybridized with pAN7 plasmid DNA as a probe containing the hph gene.
|
Our second aim was to assess whether a T-DNA-containing A. fumigatus gene can be integrated at a specific site via homologous recombination. The gene chosen as the target for homologous integration was alb1, a polyketide synthase gene. This gene was chosen because the colonies of
alb1 mutants are readily distinguishable from the wild-type colonies (17). When alb1 is disrupted, the mutant fails to synthesize the bluish-green conidial pigment and produces albino colonies. Disruption of the alb1 gene was carried out by using a plasmid construct containing a hygromycin resistance cassette flanked by alb1 sequence (17) (Fig. 2A). Initially A. tumefaciens strain EHA105B was cocultivated with conidia of the wild-type strain B-5233 at 24°C for 48 h. However, the number of transformants was too numerous, and the filters were completely covered with transformants (data not shown). Since previous experiments had shown that cocultivation time influences transformation efficiency, we reduced the time to 40 h in order to obtain a manageable number of transformants. With a 40-h cocultivation time, the number of transformants was significantly lower, averaging 60 colonies per 107 conidia (Fig. 3). Among the transformants, 66% produced albino conidia, while the other 34% produced bluish-green conidia. Further experiments with a 40-h incubation time with a conidia-to-bacteria ratio of either 1:100 or 1:1,000 resulted in a greater reduction in transformation frequency. The average numbers of transformants obtained with the 1:100 and 1:1,000 ratios were 15 and 4, respectively. A reduction in the transformation frequency resulting from an increase in the number of Agrobacterium cells relative to conidia has also been described in A. giganteus ATMT; a fivefold increase of input Agrobacterium above the optimum levels resulted in a 16-fold reduction in transformation efficiency (13).
![]() View larger version (139K): [in a new window] |
FIG. 3. Gene disruption of alb1 via ATMT. The cocultivation plate shows transformants generated by targeted mutagenesis. Wild-type colonies (black) presumably contain ectopically integrated T-DNA. Albino colonies suggest the disruption of the alb1 gene. Adobe Photoshop version 3.0 was used for the image.
|
The gene alb1 has been previously disrupted in the wild-type B-5233 by the spheroplast transformation method (17). The disruption construct contained a cassette similar to the one used in the present study, with the same alb1 flanking regions as well as the selectable marker. Spheroplast transformation yielded 30% of the transformants with albino phenotype (17). Among the albino transformants, only 25% contained a single copy of the disruption construct integrated via double crossover; for the rest, either multiple copies of the disruption construct were present, or the disruption resulted from a single crossover event (unpublished data). Because the precise number of viable spores as well as the input of transforming DNA cannot be standardized, direct comparisons of homologous integration frequencies between spheroplast transformation and ATMT are not possible. As a general outcome, however, the yield of albino transformants by the ATMT method was twofold higher relative to wild-type transformants when compared with results from the spheroplast transformation method. Furthermore, the frequency of homologous recombination via a double crossover without additional ectopic integrations of the disruption construct is higher among albino mutants obtained by the ATMT than by the spheroplast method. In general, the frequency of homologous integration in A. fumigatus (B-5233) by spheroplast transformation is between 10 to 30%, depending on the genes targeted, and multiple integrations can range between 40 to 60% (unpublished observations). In conclusion, the ATMT method not only simplifies the transformation procedure but also offers an efficient tool for random as well as targeted integration in A. fumigatus.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»