Previous Article | Next Article ![]()
Applied and Environmental Microbiology, April 2005, p. 1829-1835, Vol. 71, No. 4
0099-2240/05/$08.00+0 doi:10.1128/AEM.71.4.1829-1835.2005
Copyright © 2005, American Society for Microbiology. All Rights Reserved.
Kosan Biosciences Inc., Hayward, California
Received 18 August 2004/ Accepted 5 November 2004
|
|
|---|
|
|
|---|
The polyketide synthase (PKS) responsible for geldanamycin biosynthesis, like other modular PKSs, consists of a set of multifunctional enzymes encoded by a large gene cluster. We are interested in making geldanamycin analogs that are not easily accessible by chemical synthesis through genetic engineering of the geldanamycin PKS. For this purpose, the gene cluster (gdm) for geldanamycin production has been isolated and sequenced (20). This cluster consists of three genes, gdmA1, gdmA2, and gdmA3, which encode a seven-module PKS, in addition to other genes for oxidative modification and carbamoyl attachment and genes for methoxymalonyl-ACP precursor biosynthesis.
Since the discovery of the eryA gene cluster for the erythromycin PKS (5, 6), methodologies have been developed for genetically engineering PKS gene clusters. The conventional gene replacement procedure, which can be slow and tedious for DNA manipulation in the producing actinomycete strains, employs direct selection for a first crossover that integrates a vector and then screening for a second crossover that exchanges the wild-type allele with the mutated allele and eliminates the remaining vector sequences. In an improvement over the double-reciprocal recombination approach, PKS genes have been cloned in shuttle vectors that are capable of replication in Streptomyces, as well as in Escherichia coli, downstream of promoters that permit expression in several Streptomyces hosts (10, 27, 30). This system allows for the engineering, in E. coli, of domains for alternative substrate specificities and ß-carbon processing activities, followed by efficient transfer to the Streptomyces hosts. A multiple-plasmid system that facilitates combinatorial biosynthesis of type I PKSs can speed up the process by combining several plasmids encoding functional mutants of PKS subunits with one or more additional mutants (26).
Our approach to make geldanamycin analogs through genetic engineering of the PKS was based on recombinogenic engineering by using Red/ET recombination and its recent adaptation to Streptomyces (8, 12, 14). Red/ET recombination is based on the discovery that allelic exchanges on the E. coli chromosome can be achieved by recombination with a selectable marker flanked by only short stretches of homology to the desired region in the chromosome, when either Red
/Redß from
phage or RecE/RecT from the Rac phage is present in the targeted strain (14, 15, 28, 29). By using Red/ET recombination technology, we were able to circumvent many of the present limitations in the engineering of polyketide systems. Current methods for combinatorial biosynthesis are limited by the need to find or create appropriate restriction endonuclease sites and by the recently introduced idea that testing a number of alternative splice sites, although laborious, can be an important factor in the success of experiments (19). In addition, the inefficient in vitro methods in which restriction endonuclease digestion and ligation with the usually large shuttle plasmids used for the expression of PKS genes are used makes the process even more troublesome.
Genetic engineering of polyketide biosynthetic genes has been used successfully to create many novel unnatural natural compounds that are not readily accessible via direct chemical modification (16, 25). In order to create novel geldanamycin analogs, gene knockouts and gene replacements in the geldanamycin biosynthetic gene cluster have been obtained (McDaniel, unpublished results). One desired modification is the introduction of a keto group at the C-5 position of geldanamycin, which can serve as a handle for further chemical modification. Initially, traditional genetic approaches, such as streptomycete phage- or plasmid pKC1139 (2)-mediated gene replacement, were found to be ineffective and tedious. To accomplish this goal, an approach using Red/ET recombination with gene complementation was developed.
Since the geldanamycin biosynthetic gene cluster spans over 60 kb, it would be difficult to work on a plasmid carrying such a large amount of DNA (20). Therefore, a segment containing gdmA2A3 and some of the downstream tailoring genes was subcloned into a
C31-derived attB-integrating vector to facilitate engineering of the desired region of the gene cluster and to reduce the chances of intramolecular recombination between similar active site domains, such as ketosynthase domains. After Red/ET recombination was performed in an E. coli host, the resulting plasmid containing the genetic modification, a point mutation that inactivated the ketoreductase 6 (KR6) domain, was introduced by conjugation into a Streptomyces hygroscopicus gdmA2A3 deletion mutant strain, where it complemented the resident gdmA1 gene to produce a novel compound. In our strategy, instead of deletion of the entire KR6 domain, a conserved tyrosine (Y1888) in the ketoreductase catalytic domain was mutated to phenylalanine because this was reported to be superior to ketoreductase deletion (21).
|
|
|---|
Plasmid pSC101-BAD-gbaA (Tetr) bearing genes encoding Red
and Redß was obtained from Gene Bridges (Dresden, Germany) and was introduced by transformation into E. coli DH5
. The resulting strain was used as the host for Red/ET recombination. E. coli DH5
was also used as the host for routine DNA cloning.
Plasmid construction.
pKOS279-48 is a pKC1139 (2)-based plasmid and contains the aphII gene of Tn5 between the ketosynthase 4 (KS4) and dehydratase 7 (DH7) domains of a 7.8-kb gdmA fragment. This plasmid was used in construction of the gdmA2A3 deletion host as described below. Construction of pKOS279-48 (Fig. 1) was accomplished by inserting the SpeI-XbaI fragment of pKOS279-46B into the XbaI site of pKOS279-46A. pKOS279-46B resulted from insertion of the StuI-SmaI fragment (carrying the aphII gene) of SuperCos 1 (Stratagene) into the unique EcoRV site of Litmus 28 (New England Biolabs). pKOS279-46A was made by cloning two 1.5-kb fragments from the gdm PKS cluster between the EcoRI and HindIII sites of pKC1139 in the same orientation as in the natural gdmA2A3 gene. The left fragment consisted of DNA immediately upstream of the acyltransferase 4 (AT4) domain, and the right fragment consisted of DNA immediately downstream of the AT7 domain, cloned in pKOS309-03 and pKOS309-05, respectively (K. Patel, unpublished results).
![]() View larger version (28K): [in a new window] |
FIG. 1. Construction of pKOS279-48. The experiments are described in the text. aac(3)IV, apramycin resistance gene (3).
|
C31, so it can be integrated into the chromosomes of strains of interest. Construction of pKOS279-69 (Fig. 2) was started by subcloning the 7.8-kb NheI-PstI fragment (carrying module 4 and part of module 5) from pKOS256-107-3 (20) into Litmus 28 to obtain pKOS313-57. At the same time, an AvrII-XmnI fragment was generated by PCR with primers M4F (5'-TCCTAGGACATATGGCGAATGACGAGC) and M4R (5'-GCGTCGAAGAGGTTCTCCAG) (AvrII, NdeI, and XmnI restriction sites in the primers are underlined) by using pKOS256-107-3 as the template. The amplified AvrII-XmnI fragment was used to replace the AvrII-XmnI fragment of pKOS313-57 to make pKOS279-68. Then the NdeI-PstI fragment carrying module 4 of pKOS279-68 and the XbaI-NdeI fragment (carrying the ermE* promoter) of pKOS159-8 (22) were ligated and inserted between XbaI and PstI sites of Litmus 28 to produce pKOS279-68B. Plasmid pKOS279-69 finally resulted from insertion of the EcoRI-PstI fragment from pKOS279-68B and a 22.7-kb PstI fragment from pKOS256-107-3 into pKOS159-8 linearized with EcoRI and NsiI.
![]() View larger version (27K): [in a new window] |
FIG. 2. Relevant genes and restriction endonuclease enzyme sites of the gdm inserts (and the ermE* promoter) in pKOS256-107-3 (A), pKOS313-57 (B), pKOS279-68 (C), pKOS279-68B (D), and pKOS279-69 (E). ermE*P, mutated ermE gene promoter (1).
|
pKOS272-166 was made by two steps of Red/ET recombination to introduce the KR6° mutation into pKOS279-69 (the gdmA2A3 expression plasmid) (Fig. 3), as follows. In the first step, 1 µg of a 2.3-kb linear SacII fragment from pKOS272-139 containing approximately 0.4 kb of the KR6° cassette flanking the kanamycin gene marker (aphII) was coelectroporated with 3 µg of pKOS279-69. The total volume of DNA added never exceeded 4 µl. Analysis of all the kanamycin-resistant (Kmr) clones indicated that there was a mixed population of the original plasmid and the desired KR6° plasmid. The plasmid preparation was then diluted and used for transformation. All the Kmr clones resulting from latter transformation were the expected expression plasmid (pKOS272-153). In the second step, the KR6° cassette fragment linearized with EcoRI and HindIII from pKOS272-134 was coelectroporated with pKOS272-153 completely digested with AvrII and NsiI into the Red/ET recombination host. Recombinants were selected with 60 µg of apramycin per ml. Different sets of restriction endonucleases were used to verify the desired product. Approximately 30 to 40% of the clones contained a mixed population of the desired KR6° expression plasmid and the parent wild-type plasmid. The KR6° expression plasmid, pKOS272-166, was purified by passage through DH5
and was verified by restriction endonuclease analysis and loss of Kmr.
![]() View larger version (42K): [in a new window] |
FIG. 3. Schematic diagram of the Red/ET recombination approach for construction of pKOS272-166 (gdmA2A3-KR6° expression plasmid). In step 1, a linear DNA fragment containing the aphII gene and approximately 0.4 kb of the KR6° cassette flanking the gene marker was cotransformed with plasmid pKOS279-69 into competent Red/ET recombination cells. Kmr clones were selected. In step 2, a linear DNA fragment containing the KR6° cassette was coelectroporated with linearized pKOS272-153 cut by AvrII and NsiI. Aprr transformants were selected. ermE*P, mutated ermE gene promoter (1); int, integrase gene from streptomycete phage C31.
|
The XAD-16 was extracted with 200 ml of methanol three times. The aqueous methanolic extract was concentrated on a rotary evaporator and freeze-dried. The resultant brown residue was resuspended in 120 ml of methanol and filtered. The filtrate was evaporated, which resulted in a brown solid, which was redissolved in dichloromethane-methanol. About 10 g of silica gel was added to the solution, and the mixture was evaporated to obtain a free-flowing powder. This powder was loaded on a silica gel column and eluted with a 0 to 10% methanol gradient in dichloromethane. The fractions showing mass spectrometric (MS) peaks at 506 and 528 were pooled and evaporated, which resulted in a light brown solid. The crude sample was further purified by high-performance liquid chromatography (HPLC) using a C18 column (length, 150 mm; inside diameter, 21.2 mm; MetaChem Polaris 5u C18-A) that was eluted with a gradient of acetonitrile in water. Fractions were pooled based on liquid chromatography-MS analysis. KOSN-1869 was obtained as a white solid after lyophilization. 1H nuclear magnetic resonance (NMR) (CD3OD, 400 MHz):
(relative to CHD2OD at 3.30 ppm) 0.74 (d, 3, J = 6.4 Hz), 0.99 (d, 3, J = 6.8 Hz), 1.05 (m, 1), 1.60 (m, 1), 1.61 (s, 3), 1.83 (s, 3), 1.83 (m, 1), 2.22 (dd, 1, J = 8.0, 13.2 Hz), 2.40 (m, 1), 2.41 (dd, 1, J = 6.4, 13.2 Hz), 3.03 (d, 1, J = 10.4 Hz), 3.22 (s, 3), 3.34 (s, 3), 3.43 (dd, 1, J = 3.0, 8.2 Hz), 3.88 (d, 1, J = 6.4 Hz), 4.22 (d, 1, J = 6.4 Hz), 5.34 (d, 1, J = 10.0 Hz), 6.05 (s, 1), 6.07 (s, 1), 6.10 (s, 1), 6.18 (s, 1). 13C NMR (CD3OD, 100 MHz):
(relative to CD3OD at 49.0 ppm) 8.6, 13.0, 17.2, 19.7, 31.8, 35.4, 36.3, 45.5, 56.7, 58.3, 75.1, 78.3, 81.3, 83.8, 100.3, 101.7, 104.0, 108.3, 110.0, 133.1, 133.6, 144.2, 148.0, 158.4, 159.4, 168.1, 168.4. Electrospray ionization time of flight MS m/z 506.2768, calculated for C27H40NO8 ([M+H]+) 506.2748. UV
max 211, 240 (sh), 285 nm.
|
|
|---|
![]() View larger version (19K): [in a new window] |
FIG. 4. Total ion chromatograms (TIC) from HPLC-MS analysis of extracts from fermentation of strains K279-48/pKOS279-69 (A) and K272-166 (B). The positions of geldanamycin and related compounds (as determined by their fragmentation patterns) are indicated. Geldanamycin and its reduced form, 18,21-dihydro-geldanamycin, appeared at about 6.95 and 3.98 min on the chromatogram of strain K279-48/pKOS279-69 with MS peaks at 583 and 585 AMU ([M+Na]+), respectively. KOSN-1869 appeared at about 2.1 min on the chromatogram of strain K272-166 with a base MS peak at 506 AMU ([M+H]+).
|
The next step was a second round of Red/ET recombination to replace the selectable marker with the KR6° cassette (Fig. 3). In this step, the linear KR6° cassette fragment from pKOS272-134 was used as a donor, and linearized pKOS272-153 was used as the recipient, which was cut in the region homologous to the donor. The use of a linearized recipient plasmid favored selection of the recombinogenic event, which circularized the target plasmid in the absence of a counterselection gene marker. Restriction endonuclease digestion analysis of 10 Aprr colonies indicated that 40% of the clones obtained were mixtures of the recipient plasmid and the expected KR6° mutants, and the rest appeared to be rearranged recipient plasmid. The desired expression plasmid, pKOS272-166 carrying gdmA2A3 with a KR6° mutation, was purified from the mixture as described above. All the Aprr and kanamycin-sensitive clones harbored plasmid pKOS272-166, showing the expected DNA banding patterns on agarose gels after restriction endonuclease digestion and carrying gdmA2A3 with a KR6° mutation.
Novel compound resulting from a KR6 null mutation and characterization of this compound.
Plasmid pKOS272-166 containing the KR6° modification was introduced into strain K279-48 by conjugation. Exconjugants were fermented in GPM for 4 days. Analysis by HPLC-MS of the major metabolites produced did not indicate any compound with the expected mass of 5-keto geldanamycin (575 atomic mass units [amu]). However, a major product (KOSN-1869) (Fig. 5B) of strain K272-166 with a nominal mass of 505 amu was found (Fig. 4B). Sixteen milligrams of KOSN-1869 was recovered from 1.6 liters of culture. HR-electrospray ionization-time of flight-MS analysis confirmed that the molecular formula was C27H39NO8, indicating that the carbamoyl group was missing. 1H, 13C, two-dimensional correlation spectroscopy (COSY), heteronuclear single quantum correlation (HSQC), and heteronuclear multiple bond correlation (HMBC) NMR data for this compound in methanol-d4 clearly established that the structure of the fragment for C-6 to C-15 was identical to that of 7-O-decarbamoylgeldanamycin. The only peaks on the 1H NMR spectrum downfield of the doublet for C-9 H at
5.33 ppm were four singlets at 6.0 to 6.2 ppm, which belonged to protons attached to carbons at
101 to 110 ppm. There was one quaternary carbon at 100.3 ppm that showed a strong cross peak with the C-2 Me (1H
1.82 ppm) in the HMBC spectrum. This indicated that the aryl ring existed in a phenolic form and C-2 to C-5 belonged to enol systems. The UV spectrum showed a
max at 285 nm due to the extended conjugated enol system, while it lacked the
max at 305 nm, a characteristic of the quinone system observed in geldanamycin. KOSN-1869 was also differentiated physicochemically from geldanamycin by its increased polarity, as indicated by a much shorter retention time in reversed-phase HPLC (Fig. 4B) and relative insolubility in chloroform. Overall, the analytical data for KOSN-1869 are consistent with data for 3,5-dihydroxy-4,5-dehydroprogeldanamycin, which is the di(enol) form of a 3,5-diketo derivative of geldanamycin (Fig. 5B).
![]() View larger version (24K): [in a new window] |
FIG. 5. (A) Proposed biosynthetic pathway for geldanamycin in its native producer. (B) Proposed biosynthetic pathway for KOSN-1869 in the KR6 null strain. The dashed lines through DH6, ER6 (enoyl reductase 6), KR7, DH7, and post-PKS modifications indicate that the reactions did not occur. AHBA, 3-hydroxy-5-aminobenzoic acid; ACP, acyl carrier protein.
|
In the biosynthesis of geldanamycin from 3-hydroxy-5-aminobenzoic acid (Fig. 5A), the 5-keto intermediate 1 is reduced by the KR6 domain, resulting in a 5-hydroxy intermediate, which is further processed by the DH6 and enoyl reductase 6 domains. The next polyketide chain elongation via module 7 ketosynthase (KS7) and acyltransferase (AT7) results in the linear polyketide chain 3, which undergoes 3-keto reduction (KR7) and 2,3-dehydration (DH7), followed by cyclization via the lactam synthase (GdmF), forming progeldanamycin. Modifications by post-PKS enzymes lead to geldanamycin (20).
In the KR6° strain, the 5-keto intermediate 1 directly underwent chain elongation via KS7 and AT7, forming the 3,5-diketo intermediate 4 (Fig. 5B). Because of the dipolar repulsion between the carbonyl groups at C-1, C-3, and C-5, this intermediate underwent tautomerization, resulting in the much more stable 3,5-dien-3,5-diol tautomer 5. Interestingly, such di(enol) structures were observed in the tetraketide shunt products synthesized by a mutant with a mutation in the rifamycin pathway (9). Since intermediate 5 was not a substrate for KR7, it underwent cyclization via the lactam synthase (GdmF), resulting in KOSN-1869. The fact that only KOSN-1869 was isolated suggested that it was not a good substrate for the post-PKS enzymes, such as the monooxygenase(s) to transform it into a benzoquinone form or the carbamoyl transferase to form the 7-carbamate.
|
|
|---|
Because of the need to boost the flow of new nontraditional drug leads into preclinical studies, we adopted the Red/ET recombination technology for generating new polyketides because it overcame some of the limitations of traditional approaches for PKS engineering. Streptomyces genetic manipulation presents many challenges. In addition to the slow growth of the majority of Streptomyces strains, unknown restriction-modification systems, low frequencies of homologous recombination in polyketide-producing hosts, and a lack of efficient vectors often further slow the process of DNA engineering. Using Red/ET recombination in E. coli, we engineered the geldanamycin gdmA3 KR6 domain to eliminate its activity. This approach obviated the need for introducing appropriate restriction endonuclease sites for the engineering, as well as restriction endonuclease digestion and ligation of large plasmids used to complement the gdmA2A3 deletion strain. Red/ET recombination could also facilitate the testing of alternative splice sites and donor domains when acyltransferase domain swaps are objects, although it was not necessary in this work. By using the Red/ET recombination and gene complementation approach, novel geldanamycin analogues resulting from different acyltransferase domain swaps in the geldanamycin gene cluster have recently been generated rapidly by our colleagues.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»