Previous Article | Next Article ![]()
Applied and Environmental Microbiology, November 2006, p. 7401-7405, Vol. 72, No. 11
0099-2240/06/$08.00+0 doi:10.1128/AEM.01611-06
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
| SHORT REPORT |
D. Moine,
M. Delley,
A. Mercenier,
F. Arigoni, and
R. D. Pridmore*
Department of Nutrition and Health, Nestlé Research Center, P.O. Box 44, Vers-chez-les-Blanc, 1000 Lausanne 26, Switzerland
Received 12 July 2006/ Accepted 29 August 2006
|
|
|---|
|
|
|---|
The determination and analysis of the complete genome sequence of the human infant isolate Bifidobacterium longum NCC2705 (19) has provided insight into the genes that play a role in its metabolic capabilities and its interactions with the host (4). This vast quantity of genomic data cannot be fully exploited at present due to limitations in molecular genetic tools for the analysis of gene function and regulation in the genus Bifidobacterium. In order to initiate studies on promoter activities and to independently confirm data generated by microarray experiments, we constructed the versatile plasmid pMDY23 based on an Escherichia coli origin of replication, a small cryptic B. longum plasmid, and the Escherichia coli ß-glucuronidase gene, gusA (5), that has been successfully used as a reporter gene in a wide range of organisms (6, 7, 15, 20). pMDY23 has been designed to function (i) as a reporter for promoter strength or regulation analysis and (ii) for the identification of genomic fragments containing active promoters (promoter probe). Here we demonstrate the use of pMDY23 as a reporter plasmid with the analysis of the activity of three B. longum promoters. Preliminary microarray-based gene expression data were used to identify probable expressed genes, and the regions directly preceding two of them were tested for promoter activity in plasmid pMDY23. These were the potential promoters pr-BL1363 (promoter of gene BL1363) preceding BL1363, encoding the enzyme glyceraldehyde 3-phosphate dehydrogenase, and pr-BL1613, preceding BL1613, encoding a member of the LacI family of bacterial regulator proteins (Pfam no. PF00356). Secondly, a predicted sugar-regulated promoter, pr-BL1518, preceding the gene BL1518, encoding the enzyme
-galactosidase, was also tested.
Analysis of the B. longum NCC2705 genome sequence did not reveal the presence of a complete gene encoding the enzyme ß-glucuronidase responsible for the deconjugation of ß-D-glucuronides in the gastrointestinal tract; however, NCC2705 contains a truncated, 105-bp open reading frame (BL1077; genome coordinates 1307865 to 1307969) encoding a peptide with similarity to GusA proteins. The absence of ß-glucuronidase activity was confirmed using an enzymatic test (Table 1). B. longum NCC2705 obtained from the Nestlé Culture Collection was grown in MRS medium (Becton Dickinson AG, Basel, Switzerland) containing 0.05% (wt/vol) cysteine (MRS-cys) supplemented with 2% (wt/vol) glucose at 37°C. Precultures were incubated in anaerobic conditions using AnaeroGen (Oxoid AG, Basel, Switzerland), while cultures for enzyme activity measurements were grown in a Sixfors fermenter system composed of four individual 500-ml vessels (Infors AG, Bottmingen, Switzerland). Growth medium was sparged overnight with CO2 to produce anaerobic conditions, while fermentations were performed at 37°C with 200 rpm agitation and a constant pH of 6.5 (by addition of 1 M NaOH). All fermentations were performed in duplicate using separate vessels inoculated at 1% (vol/vol) and an approximate starting optical density at 600 nm (OD600) of 0.05.
|
View this table: [in a new window] |
TABLE 1. Expression of the E. coli gusA gene in B. longum NCC2705 in plasmid pMDY23 from the selected promoters
|
10 µm), and the cells were disrupted with a Mini-Bead Beater-8 (Fisher Scientific SA, Wohlen, Switzerland) at 4°C, using three cycles of 1 min with cooling on ice between each cycle. Bacterial debris was removed by centrifugation at 20,000 x g for 10 min, and the cell extracts were transferred to clean tubes. From 20 to 100 µl of cell extract was incubated with 7.5 mM para-nitrophenyl-
-D-glucuronide (Sigma-Aldrich AG, Buchs, Switzerland) at 37°C, and the release of nitrophenol was monitored at 405 nm. Specific ß-glucuronidase activity was expressed in nanomolar units of nitrophenol released per minute per milligram of protein. Protein concentrations were determined according to the method of Bradford (2) using the Bio-Rad determination kit (Bio-Rad Laboratories AG, Reinach, Switzerland) and bovine serum albumin as standard. Each enzymatic assay was performed in triplicate, starting from each biological replicate. As stated above and seen in Table 1, the strain B. longum NCC2705 possesses no ß-glucuronidase enzyme activity, hence permitting the use of the gusA gene as a reporter for the analysis of B. longum promoters. DNA manipulations, plasmid isolation, and transformation of E. coli were performed according to standard procedures (18). B. longum strains were screened for plasmids that could be developed into cloning vectors. One microgram of chromosomal DNA isolated according to Germond et al. (3) was separated on a 1% agarose gel, stained with ethidium bromide, and visualized with UV light. B. longum strain NCC293 isolated from infant feces was identified as containing a small extrachromosomal element, further referred to as pNCC293 (data not shown). NCC293 chromosomal DNA was digested with selected enzymes and NarI identified as cutting pNCC293 once, generating a linear plasmid of 1.8 kb in size. The NarI-digested pNCC293 was extracted from the gel, ligated into AccI-digested pUC18 (22), and used to transform E. coli strain TG1 (Stratagene Inc., La Jolla, CA). Transformants were selected on Luria-Bertani (LB) plates supplemented with 100 µg/ml ampicillin, 5-bromo-4-chloro-3-indolyl-ß-D-galactopyranoside, and isopropyl-ß-D-thiogalactopyranoside and incubated at 37°C. A clone containing pNCC293 was identified and named pDP869. DNA sequence analysis of the cloned plasmid pNCC293 revealed a 1,824-bp circular plasmid with 98.8% identity to the 1,847-bp B. longum plasmid pMB1 (12). The two plasmids differ in the number of 24-bp direct repeats, 3.5 and 4.5 for pNCC293 and pMB1, respectively, and base pair changes in pNCC293 between the end of repB and the repeats that create a 29-bp stem, 46-bp loop hairpin structure with a calculated energy of 42.48 kcal/mol (23). Plasmid pJL74 (pBluescript SK+ carrying a spectinomycin resistance gene) (9) was digested with EcoRI plus BamHI, and the 1.2-kb spectinomycin resistance gene was ligated into pDP869 digested with the same enzymes. Transformants in TG1 were selected on LB plates containing 100 µg/ml spectinomycin. The resulting plasmid was amplified with the primers P1 and P2, listed in Table 2 (MWG-Biotech AG, Ebersberg, Germany), using the Expand High Fidelity DNA polymerase (Roche Diagnostics AG, Rotkreuz, Switzerland), digested with the restriction enzyme AgeI, and ligated to give the E. coli-B. longum shuttle vector pDP870, containing a polylinker and lacking the ampicillin resistance gene. Plasmid pDP870 will be of interest due to its relatively small size and its cloning array of unique restriction sites. The plasmid may also be a combination with other, compatible shuttle vectors derived from B. longum plasmids (10, 11, 13, 14, 17, 21) for the expression of multiple genes in B. longum strains. The 1.85-kb DNA fragment containing the E. coli gusA gene was amplified from plasmid pNZ124-PrecA-GusA (a kind gift from Gabrielle Giliberti) using the primers GUS-F and GUS-R listed in Table 2. The gusA amplicon was digested with XhoI and PstI and ligated into pDP870 digested with XhoI and NsiI to create plasmid pMDY23, shown in Fig. 1.
|
View this table: [in a new window] |
TABLE 2. List of primers used in this worka
|
![]() View larger version (22K): [in a new window] |
FIG. 1. Schematic map of the 6,092-bp plasmid pMDY23 containing the E. coli origin of replication (hatched box). The gusA reporter gene is in black, the spectinomycin resistance gene (Sp) is light gray, and the B. longum replicon pNCC293 predicted replication proteins Rep1 and Rep2 are dark gray. The polylinker at the start of the gusA reporter gene is expanded and annotated with restriction sites plus translation products below the plasmid. Potential GTG and ATG initiation codons are marked in boldface type, and the size markers (in kilobases) are within the circle.
|
Transformants were obtained for all plasmids. The enzyme activity was measured as described above, and the results are shown in Table 1. In the cell extracts of recombinants NCC2705 (pGUSA) and NCC2705 (pGUSB) we detected ß-glucuronidase activities of 171.7 and 8.6 U for the pr-BL1363 and pr-BL1613 promoters, respectively. While the generation times of NCC2705 (pGUSA) and NCC2705 (pGUSB) were not significantly different from the host strain NCC2705, the standard deviation of the generation time increased, possibly suggesting some toxic effects of ß-glucuronidase expression or a problem with plasmid stability or copy number.
The effects of GusA expression on plasmid stability was investigated as follows. Plasmid copy number relative to the bacterial chromosome was determined using quantitative PCR (qPCR) as described previously (16), with the exception that the target chromosomal DNA was not digested by a restriction enzyme. qPCR primers were designed for plasmid pDP870 and the chromosomal gene BL0003 using the program Primer Express (Applied Biosystems, Rotkeutz, Switzerland) and tested on plasmid pDP870-BL0003, where the BL0003 qPCR target region was amplified using primers BL0003-5' and BL0003-3', digested with the restriction enzymes HindIII and XbaI, and cloned into HindIII- and SpeI-digested pDP870. Plasmid pDP870-BL0003, ensuring a 1:1 ratio of both qPCR targets for the assessment of amplification efficiency, was used to generate standard curves using 10-fold serial dilutions using SYBR green (Applied Biosystems, Rotkeutz, Switzerland) on an ABI Prism 7000 machine (Applied Biosystems, Rotkeutz, Switzerland) with eight replicates for each dilution. Plasmid copy number was determined by qPCR with primers qPCR-pDP870-5' plus qPCR-pDP870-3' and qPCR-BL0003-5' plus qPCR-BL0003-3' on approximately 1 pg of total DNA with eight replicates for each sample. The average of the cycle threshold (CT) values was used to determine the difference between the two qPCR targets,
CT, and the plasmid copy number calculated using the following equation: plasmid copy number = 2
CT. The plasmid copy numbers for all plasmids are shown in Table 1. Plasmid pMDY23 without a promoter in NCC2705 showed an average copy number of 12.7, which was reduced to 10.4 for the highest GusA expression level with plasmid pGUSA. Plasmid segregation stability was determined on 100 individual colonies after 10 generations of nonselective replication. Plasmid pMDY23 in NCC2705 showed 100% segregation stability, while plasmids pGUSA and pGUSB in NCC2705 showed a slightly reduced stability of 98% and 99%, respectively. Plasmid structural stability was investigated by using total DNA extracted from NCC2705 (pGUSA) to transform E. coli strain TG1. Plasmid DNA was extracted from 24 spectinomycin-resistant colonies and digested with the restriction enzyme RsaI, giving seven visible bands on a 1% agarose gel. All 24 plasmid digests showed indistinguishable digestion patterns. These results showed that the E. coli gusA gene was translated into an active and stable enzyme in B. longum NCC2705 and that the highest expression level described here from plasmid pGUSA did not result in a structural instability of the plasmid but may have induced a slight reduction in segregation stability and relative copy number.
Many bacterial genes are expressed in response to changes in environmental conditions, either physical or nutritional, and the corresponding regulated promoters are interesting, as they allow the modulation of the level of heterologous or homologous gene expression. This is especially of interest if the gene product is detrimental to the proliferation of the producing cell. The gene BL1518 encoding the enzyme
-galactosidase is likely a component of the multi-sugar metabolism operon (BL1520 to BL1525) required for the transport and metabolism of various sugars, including raffinose. The promoter of gene BL1518 was identified as being potentially regulated by the sugar raffinose and selected for analysis. The 291-bp pr-BL1518 amplicon (genome coordinates 1692388 to 1692679) was amplified with primers pr-BL1518-5' and pr-BL1518-3' and ligated into pMDY23 to give plasmid pGUSC. The plasmid was used to transform B. longum NCC2705. The transformant was cultivated as described above using either 2% glucose, 2% raffinose, or 1% of each sugar as a carbon source, and the ß-glucuronidase activity was measured at OD600 of 0.5 to 0.6. ß-Glucuronidase activity measured in NCC2705 (pGUSC) with glucose as a carbon source was relatively low at 5.1 U (Table 1). A similar culture with raffinose as a carbon source showed a ß-glucuronidase activity of 62 U, a 12x increase in enzyme activity that suggests an equivalent increase in promoter activity. Plasmid pGUSC in NCC2705 showed a 100% segregation stability when cultivated in either glucose or raffinose as a carbon source. This result confirms that the
-galactosidase gene expression is indeed induced when raffinose is supplied as the sole carbon source but that a residual activity is also detectable in the presence of glucose as the sole carbon source. Finally, when NCC2705 (pGUSC) was grown with glucose and raffinose, a ß-glucuronidase activity of 10.6 U was measured, a 2x increase in enzyme activity compared to glucose alone (Table 1), which indicates a significant but not complete repression of the raffinose-induced expression by glucose.
In this work, we described the construction of a versatile plasmid, pMDY23, that can function as a reporter plasmid for the determination of promoter strength and the identification of promoters containing DNA fragments from a random genome library. On the basis of microarray expression data, we identified candidate promoter regions that were cloned before the gusA gene of pMDY23 to demonstrate its utility as a reporter plasmid by the quantification of one low and one strong active promoter. Finally, a promoter whose activity is regulated by the sugar raffinose was identified from the genome annotation and confirmed using pMDY23. Plasmid pMDY23 therefore provides a new tool for the analysis and understanding of the B. longum genome sequence.
|
|
|---|
Published ahead of print on 22 September 2006. ![]()
Present address: Nestlé UK, Haxby Road, York YO91 1XY, England. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»