Previous Article | Next Article ![]()
Applied and Environmental Microbiology, February 2006, p. 1684-1687, Vol. 72, No. 2
0099-2240/06/$08.00+0 doi:10.1128/AEM.72.2.1684-1687.2006
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
| SHORT REPORT |
INRA-Université de Bourgogne, UMR Microbiologie et Géochimie des Sols, CMSE, 17 rue Sully, B.V. 86510, 21065 Dijon Cedex, France
Received 22 August 2005/ Accepted 14 November 2005
|
|
|---|
Cd > Cu. These results demonstrated that there was a cumulative effect of metal toxicity. Furthermore, the trend of modifications was consistent with the "hump-backed" relationships between biological diversity and disturbance described by Giller et al. (K. E. Giller, E. Witler, and S. P. McGrath, Soil Biol. Biochem. 30:1389-1414, 1998). |
|
|---|
The soil used for this study was a calcareous sandy luvisol under a garden market (southwest of Paris, France). The pH was 7.9 and the soil contained 83.5% sand, 7.9% silt, 8.6% clay, 2.5% CaCO3, 0.97% organic C, and 0.76% organic N. The soil was not affected by any known metal contamination and had a classical soil background (8 mg Cu · kg1, 0.25 mg Cd · kg1, 0.07 mg Hg · kg1) (1). It was collected from the plowed layer (depth, 0 to 20 cm) and was sieved with a 4-mm sieve.
Microcosms were set up by placing 10 g (dry weight) of soil into 125-ml plasma flasks. Cu, Hg, and Cd were added as aqueous chloride solutions at a level that was 80% of the water-holding capacity of the soil. The low level of contamination (LC) corresponded to final total concentrations of Cu, Hg, and Cd of 50, 2, and 2 mg · kg soil1, respectively. The medium level (MC) corresponded to 150, 10, and 10 mg · kg soil1, respectively, and the high level (HC) corresponded to 300, 20, and 40 mg · kg soil1, respectively. These concentrations were chosen by compiling data from the literature dealing with soil contamination and metal effects on the density and diversity of soil microbial communities (5, 7, 8, 11, 12). In parallel, control incubation mixtures were supplemented independently with sterile water and with KCl at concentrations of 150 mg and 300 mg · kg soil1 to simulate addition of chloride anions and with HCl at concentrations of 0.05 N and 0.1 N to simulate soil acidification due to MC and HC metal spiking, respectively. Metals were applied singly or in combination (Cu + Cd + Hg) for each concentration. Soil was incubated at 20°C for 60 days, and triplicate microcosms were killed at zero time and on days 10 and 60 for analyses.
The genetic structure of the bacterial community was characterized by using the bacterial automated ribosomal intergenic spacer analysis (B-ARISA) fingerprinting approach for soil DNA extract (10). This approach provided complex profiles with peaks ranging from 250 bp to more than 1,000 bp for each sample studied (Fig. 1). B-ARISA profiles were analyzed by principal-component analysis (PCA), which resulted in plotting, on a factorial map, of the genetic structure of the bacterial community based on similarities (Fig. 2 to 4). In Fig. 2 to 4, statistical ellipses indicate (with 90% confidence) the replicates of microcosms subjected to similar treatments. Overlapping of statistical ellipses means that the genetic structures were not significantly discriminated by PCA (10). The PCA of control microcosms (supplemented with water, HCl, and KCl) demonstrated that the genetic structure of the bacterial community was not modified by these treatments during the incubation period (data not shown). Except for Cd at LC, the three metals added singly resulted in significant modifications of the bacterial genetic structure at each level of contamination (Fig. 2A to C). The changes induced by Cd increased with time during incubation, whereas for Hg the modifications of the genetic structure occurred between zero time and day 10 and after day 10 remained stable. For Cu, shifts were observed between zero time and day 10 for LC and MC, but the modifications seemed to be resilient since the genetic structure at day 60 was similar to that observed at zero time. For HC (300 mg Cu · kg soil1), the changes in the genetic structure gradually increased with the incubation period. Other authors have observed similar resilience of microbial communities (defined as the speed with which a system returns to its predisturbance level following a disturbance) with copper concentrations close to LC and MC (16). Furthermore, our results were in agreement with those of Frostegard and Bååth (7), who found that modifications in the microbial composition became irreversible at Cu concentrations greater than 130 mg · kg soil1. The trimetal treatments resulted in modifications which were more marked than the modifications observed with the corresponding single-metal treatments and were irreversible (Fig. 2D). These findings were consistent with the findings of Renella et al. (13), who demonstrated the additive effect on soil enzymatic activities of polymetal contamination (Cu + Cd + Zn) compared to the effect of each metal added singly.
![]() View larger version (96K): [in a new window] |
FIG. 1. B-ARISA profiles obtained at day 60 with DNA extracted from triplicate microcosms treated with water (control) and with copper (Cu), cadmium (Cd), mercury (Hg), and all three metals (Cu + Hg + Cd) at HC.
|
![]() View larger version (49K): [in a new window] |
FIG. 2. PCA ordination of the bacterial genetic structure for microcosms contaminated with copper (A), cadmium (B), mercury (C), and all three metals (Cu + Hg + Cd) (D) at LC (panels I), MC (panels II), and HC (panels III). The statistical ellipses indicate 90% confidence for replicates. Open ellipses, zero time (T0); light gray ellipses, day 10 (T10); dark gray ellipses, day 60 (T60).
|
![]() View larger version (15K): [in a new window] |
FIG. 4. PCA ordination of the bacterial genetic structure for control microcosms (open ellipses) and microcosms contaminated with copper (light gray ellipses), cadmium (dark gray ellipses), mercury (black ellipses), and all three metals (striped ellipses) at MC (A) and HC (B) at day 60. The statistical ellipses indicate 90% confidence.
|
![]() View larger version (22K): [in a new window] |
FIG. 3. PCA ordination of the bacterial genetic structure for the different levels of copper (A), cadmium (B), mercury (C), and trimetal (D) contamination at day 60. The statistical ellipses indicate 90% confidence. Open ellipses, control microcosms (H2O); light gray ellipses, LC; dark gray ellipses, MC; striped ellipses, HC.
|
Cd > Cu. Furthermore, most of the profile modifications resulted in the appearance of new bands and/or an increase in the intensity of preexisting bands, except for HC trimetal contamination. Although B-ARISA did not allow estimates of bacterial diversity, the modifications seemed to be consistent with the "hump-backed" relationships between biological diversity and metal stress (8). This model hypothesized that for the relationship between pollution stresses and genetic diversity in microbial communities there was not a simple negative correlation. It assumed that the increase in stress (from LC to HC single-metal treatments and from LC to MC trimetal treatments in our study) reduced the innate competitive exclusion between populations and induced the enrichment and predominance of other types of populations (as illustrated by increasing band intensity), leading to possible higher diversity, followed, when stress reached a critical high level (HC trimetal treatment), by progressive extinction of organisms, leading to a loss of diversity.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»