Previous Article | Next Article ![]()
Applied and Environmental Microbiology, May 2006, p. 3662-3672, Vol. 72, No. 5
0099-2240/06/$08.00+0 doi:10.1128/AEM.72.5.3662-3672.2006
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
S. Kuhn,
A. Pühler, and
A. Schlüter*
Lehrstuhl für Genetik, Fakultät für Biologie, Universität Bielefeld, Postfach 100131, D-33501 Bielefeld, Germany
Received 12 October 2005/ Accepted 22 February 2006
|
|
|---|
|
|
|---|
Sinorhizobium meliloti is the symbiont of alfalfa (Medicago sativa), as well as its close relatives Medicago truncatula, Melilotus, and Trigonella. The genome of S. meliloti type strain Rm1021 consists of three replicons, the chromosome (3,654 kb) and two megaplasmids that are approximately 1,354 kb and 1,683 kb long, designated pSymA and pSymB, respectively (26). These three replicons seem to accomplish different tasks. Most of the essential housekeeping genes are chromosomally encoded (11). Many of the genes involved in root nodule formation (nod genes) and nitrogen fixation (nif and fix genes) are located on pSymA (2, 3, 8, 24, 55). Genes for the production of extracellular polysaccharides (exo and exp genes), lipopolysaccharide synthesis, carboxylic acid transport (dct), utilization of lactose (lac), and thiamine synthesis (thi) have been found on pSymB (17, 22, 23, 33, 76).
Besides the two megaplasmids, several rhizobial strains carry one or more smaller accessory plasmids, which vary in number and size. Prior to the S. meliloti Rm1021 sequencing project, there was already interest in genes located on accessory plasmids. Population analysis revealed that some plasmids are widespread in indigenous rhizobial populations and occur at frequencies of at least 50% (1, 4, 56). It is assumed that rhizobial accessory plasmids are interchangeable among indigenous rhizobial populations. Mercado-Blanco and Toro (48) reviewed different functions of accessory plasmids in rhizobia. Besides traits that affect symbiosis, some of these plasmids also encode functions that enhance the growth and survival of their hosts (48). S. meliloti strain GR4 carries two accessory plasmids, designated pRmeGR4a and pRmeGR4b. Increased efficiency of nodule formation by S. meliloti strain GR4 was correlated with the presence of nfe genes located on plasmid pRmeGR4b (58, 68). To our knowledge, apart from several replication genes, genetic information about accessory S. meliloti plasmids is rare. Thus, sequence analysis of some widespread accessory plasmids would broaden our understanding of genetic variation and evolution of these accompanying DNA elements (73).
In the context of a joint project, the first deliberate release of genetically engineered microorganisms was performed in Germany (61). The genetically engineered microorganisms released were derivatives of S. meliloti strain 2011 genetically tagged with the firefly luciferase gene (luc) mediating bioluminescence (62, 63). These bacteria were released in field plots of the Federal Research Center of Agriculture (FAL, Braunschweig, Germany) in 1995 and in field plots in Strassmoos (Bavaria, Germany) in 1997. The impact of the genetically modified S. meliloti strains on the indigenous rhizobial populations was analyzed during the release experiment. Fingerprint analysis revealed that indigenous nodulating S. meliloti strains could be subdivided into several dominant fingerprint groups (64). In this paper we first describe isolation and characterization of accessory plasmids from selected members of dominant indigenous S. meliloti subpopulations. The main objective of this work was to select an accessory plasmid for complete nucleotide sequence analysis. For this purpose the accessory plasmid pSmeSM11a residing in S. meliloti strain SM11 was completely sequenced and analyzed to identify possible advantageous traits.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Bacterial strains and plasmids used
|
Plasmid transfer test by filter mating.
A 0.5-ml aliquot of the donor culture (optical density at 560 nm, 0.6) was mixed with 0.5 ml of the recipient culture (optical density at 560 nm, 0.9 to 1.0) and concentrated by centrifugation for 30 s at 14,000 x g. Mating was carried out by using nitrocellulose filters placed on TY agar. Serial dilutions of mating mixtures were plated onto TY agar plates supplemented with appropriate antibiotics.
Plasmid isolation, shotgun library construction, and sequencing.
DNA of plasmid pSmeSM11a was isolated from A. tumefaciens by alkaline sodium dodecyl sulfate lysis and column purification with a Nucleobond PC100 kit, using the NucleoBond plasmid purification protocol (Macherey-Nagel, Düren, Germany).
A pSmeSM11a shotgun library was constructed by MWG-Biotech AG (Ebersberg, Germany) using the hydroshearing approach. Fragments that were 1.3 to 2.0 kb long were cloned into the vector pGEM-T Easy. Templates for nucleotide sequencing were prepared from E. coli shotgun clones by automated lysis with a RoboPrep 2500 (MWG) and a BioRobot 9600 (QIAGEN). Cycle sequencing reaction mixtures obtained using dye terminator chemistry were separated with a MegaBACE 1000 capillary sequencer (Amersham Bioscience) and an ABI377 (Applied Biosystems) DNA sequencer (IIT Biotech GmbH, Bielefeld, Germany). Quality control of the sequence data was performed by using the in-house software tool BioMake (Bielefeld University, unpublished data), in which a normalization step applying PHRED (18, 19) was implemented. Computer-assisted assembly of random shotgun sequencing results was carried out with the CONSED/AUTOFINISH software tool (29, 30). Gap closure and polishing of the sequence were performed by primer walking using walking primers designed based on contig nucleotide sequences. We relied on Phred 40 quality in the consensus sequence.
DNA sequence analysis and annotation.
Annotation of the complete pSmeSM11a nucleotide sequence was performed by using the GenDB (version 2.0) annotation tool (49). Repeat regions within the pSmeSM11a sequence were identified and analyzed by using the REPuter software (38). Insertion elements were annotated by using the IS database homepage (http://www-is.biotoul.fr/is.html).
Construction of vector pACC1 carrying acdS and lrpL.
A 2-kb region carrying the acdS and lrpL genes of plasmid pSmeSM11a was amplified by PCR and inserted into the EcoRI site of vector pJP2 (53) to construct pACC1. Vector pACC1 was introduced into S. meliloti Rm1021 by conjugation with donor strain E. coli S17-1(pACC1). Transconjugants were selected on TY medium supplemented with streptomycin and tetracycline. As a negative control, vector pJP2 was also introduced into S. meliloti Rm1021.
ACC deaminase activity assay.
S. meliloti cells were grown in 5 ml TY medium supplemented with appropriate antibiotics at 30°C to the stationary phase. After centrifugation, cell pellets were washed twice with 0.1 M Tris-HCl (pH 7.5). 1-Aminocyclopropane-1-carboxylic acid (ACC) deaminase activity was induced by resuspending cells in 2 ml of M9 minimal medium supplemented with appropriate antibiotics and 5 mM ACC as the sole source of nitrogen and incubating the preparation for 24 h at 30°C with shaking. ACC deaminase activity was determined by spectrophotometrically measuring the production of
-ketobutyrate (32).
Growth assay with taurine.
S. meliloti cells were grown in 5 ml TY medium supplemented with appropriate antibiotics at 30°C to the early stationary phase. One milliliter of each culture was washed twice in sulfur-free Vincent minimal medium, resuspended in 10 ml of the same medium, and incubated for 48 h at 30°C in Greiner tubes with continuous shaking to starve the cells. To determine the growth behavior with taurine as the sole sulfur source, 0.1-ml portions of the culture were diluted in 10 ml of sulfur-free Vincent minimal medium and 10 ml of Vincent minimal medium supplemented with 20 mM taurine as the sole source of sulfur and incubated for an additional 48 h under the conditions described above.
Southern hybridization.
Rhizobial genomic DNA was isolated with a Gene Elute bacterial genomic DNA kit (Sigma-Aldrich Chemie GmbH, Steinheim, Germany) used according to the manufacturer's instructions, digested with EcoRI, and used for hybridization. DNA fragments were amplified from plasmid pSmeSM11a DNA by PCR, using a PCR digoxigenin probe synthesis kit (Roche-Diagnostics GmbH, Mannheim, Germany). The labeled PCR products were used as probes with EcoRI-restricted genomic DNA. Plasmid DNA was labeled by using a digoxigenin DNA labeling kit (Roche-Diagnostics GmbH, Mannheim, Germany). Labeled plasmid DNA was hybridized with EcoRI-restricted plasmid DNA and pSmeSM11a-specific PCR amplicons. Hybridization was carried out at 68°C.
Nucleotide sequence accession number.
The annotated sequence of pSmeSM11a has been deposited in the EMBL database under accession number DQ145546.
|
|
|---|
![]() View larger version (70K): [in a new window] |
FIG. 1. Characterization of Tn5-B10-tagged accessory S. meliloti plasmids by restriction profile analysis. Fragments of BamHI-digested accessory plasmid DNA isolated from A. tumefaciens UBAPF2 were separated on a 1% agarose gel. Lanes M contained standard length markers X (left) and IV (right).
|
![]() View larger version (39K): [in a new window] |
FIG. 2. Genetic map and organization of plasmid pSmeSM11a. The modular structure of plasmid pSmeSM11a is indicated by gray regions in the outer circle, as follows: a repABC replication region (region I), a region probably involved in sulfur metabolism (region II), a putative ethylene level modulation region (region III), a region carrying a mobilization module (region VI), a region homologous to pSymA (region V), and a plasmid type A replication region (region VI). The arrows in the next circle indicate the localization and orientation of coding regions that are numbered clockwise from 1 to 160. Different colors of coding sequences indicate different COG classes, as follows: dark blue, plasmid replication and partitioning; green, DNA replication, recombination, and repair; light magenta, signal transduction and metabolism; red, transcription; light blue, inorganic ion transport and metabolism; yellow, carbohydrate transport and metabolism; dark magenta, posttranslational modification, protein turnover, and chaperones; orange, miscellaneous; dark gray, function unknown; and light gray, orphan. The relative G+C content and the GC skew [(G C)/(G + C)] are shown in the two inner circles, respectively, in which a G+C content of >50% is indicated by black and a G+C content of <50% is indicated by red. G+C plots were generated using GenDB (version 2.0) (48) with a 300-nucleotide window in 50-nucleotide steps. The innermost circle indicates the scale (in base pairs). The first nucleotide of the repA coding region was chosen as the starting point for the nucleotide sequence.
|
Plasmid pSmeSM11a possesses a repABC replicon and a putative type A replication module.
A 3,622-bp region of plasmid pSmeSM11a, designated region I (Fig. 2), consists of three genes belonging to the repABC replicon family that includes several plasmids of
-proteobacteria (5-7, 13, 26, 36, 40, 50, 69, 78).
The repABC module encodes the partitioning proteins RepA (ParA family ATPase) and RepB (ParB-like nuclease domain) and the replication protein RepC. The repA gene product is 70% identical to RepA of Rhizobium etli plasmid p42d (accession no. AAM88941). The repB gene product is 69% identical to the corresponding gene product of Mesorhizobium sp. strain BNC1 (accession no. ZP_00614184), and RepC exhibits 68% identity to possible replication protein C of Agrobacterium rhizogenes plasmid pRiA4b (accession no. P05684).
A large intergenic sequence between repB and repC, which is typical for repABC replicons, was also identified on pSmeSM11a (Fig. 3A). This intergenic sequence contains A+T-rich segments and is thought to be a cis-acting incompatibility site, termed inc
, of repABC family replicons (7, 54, 69). Very recently, two novel regulatory elements, a small antisense RNA and a stem-loop structure in the repABC mRNA, were identified in the inc
regions of different rhizobial repABC plasmids (45, 75). Our analysis revealed that the intergenic sequence of pSmeSM11a also contains the characteristic sequences needed to encode a putative antisense RNA (Fig. 3B).
![]() View larger version (22K): [in a new window] |
FIG. 3. repABC replicon module present on plasmid pSmeSM11a. The repABC replicon module of plasmid pSmeSM11a constitutes region I, which is shown in Fig. 2. (A) Schematic representation of the repABC replicon module. The arrows indicate the positions of the repA, repB, and repC genes. The shaded box shows the position of the conserved intergenic region (igs). (B) Nucleotide sequence of the intergenic region between repB and repC. The RepB C-terminal segment and the RepC N-terminal segment are shown below the DNA sequence. The 35 and 10 elements of the promoter and the putative transcription start site (+1) of the putative small antisense RNA are indicated and underlined. The shaded sequence indicates a motif able to form a stem-loop structure in the small antisense RNA. The T-tract, which probably constitutes the end of the transcript, is underlined. A putative ribosome binding site for repC is indicated by boldface type.
|
The presence of two replication modules on pSmeSM11a might broaden the host range of the plasmid and could indicate that the plasmid resulted from fusion of two formerly autonomous replicons.
A putative mobilization module similar to that of Agrobacterium radiobacter plasmid pAgK84 is located on pSmeSM11a.
Region IV of plasmid pSmeSM11a (Fig. 2) represents a putative mobilization (mob) module that encodes a predicted coupling protein belonging to the TraG/VirD4 family of bacterial conjugation proteins (59), probable mobilization protein C, TraA (a putative helicase belonging to the MobA/MobL family [Pfam03389]), and two presumptive ORF products whose functions are unknown. The pSmeSM11a mob module exhibits the highest level of similarity to corresponding regions located on the linear chromosome of A. tumefaciens strain C58 (accession no. NC_003063) and on A. radiobacter plasmid pAgK84 (accession no. AY442931) (Fig. 4).
![]() View larger version (8K): [in a new window] |
FIG. 4. Alignment of the mob region of plasmid pSmeSM11a with the corresponding region of A. radiobacter plasmid pAgK84 and the linear chromosome of A. tumefaciens strain C58. Coding regions are indicated by arrows. Homologous genes are indicated by the same shade of gray. ORFs whose functions are unknown or ORFs without counterparts in the pSmeSM11a mob region are indicated by open arrows. The mob region of plasmid pSmeSM11a is designated region IV in Fig. 2. The GenBank accession numbers for the nucleotide sequences are as follows: A. radiobacter plasmid pAgK84, AY442931; and A. tumefaciens linear chromosome, NC_003063.
|
-proteobacteria since pSmeSM11a::Tn5-B10 could be mobilized by helper plasmid pRK2013 (IncP-1
) only to A. tumefaciens UBAPF2 and S. meliloti strains (
-proteobacteria) and not to Pseudomonas sp. strain B13 GFP1 (a
-proteobacterium) or Ralstonia eutropha GFP3 (a ß-proteobacterium).
A DNA region of plasmid pSmeSM11a that is more than 42 kb long is homologous to S. meliloti megaplasmid pSymA.
A 42,367-bp continuous region on pSmeSM11a designated region V (Fig. 2) is homologous to a region located on megaplasmid pSymA of S. meliloti strain Rm1021 and consists of orf107 to orf149. A comparative analysis of the homologous regions is shown in Fig. 5. Interestingly, the synteny of the two homologous regions is not continuous since a 10-kb pSymA region composed of open reading frames SMa1092 to SMa1115 is missing on plasmid pSmeSM11a. Additionally, no DNA sequence homologous to SMa1147, which encodes a conserved hypothetical protein, could be identified on plasmid pSmeSM11a.
![]() View larger version (26K): [in a new window] |
FIG. 5. Analysis of the region homologous to pSymA present in pSmeSM11a compared with the corresponding region in pSymA of S. meliloti strain Rm1021. The homologous region of plasmid pSmeSM11a is designated region V in Fig. 2. (A) Comparison of the genetic organizations of pSymA and pSmeSM11a regions, showing conserved synteny. Coding regions with different organizations (designated regions A, B, C, D, E, and F) in the two homologous regions compared are indicated. Regions which are not present in pSmeSM11a and the position of the Tn5-mob insertion are indicated by open arrows (the drawings are not to scale). Gray boxes indicate a high degree of identity (87 to 100%) between the products of homologous ORFs. Bars 1, 2, 3, and 4 indicate pSmeSM11a amplicons used as probes in hybridization experiments with total DNA preparations from different S. meliloti strains. (B) Comparison of nucleotide sequences in regions A, B, C, D, E, and F of pSmeSM11a and pSymA. The nucleotide sequences differ mostly by 1- or 2-bp deletions. Boldface type indicates the exact positions of the differences. Underlining indicates the sequences in which a single nucleotide is absent. The 232-bp duplicated region in pSmeSM11a that is responsible for a frameshift in the degP4 region (orf125 to orf127) is indicated by the sequence in parentheses (region C).
|
It might be speculated that part of SM11 plasmid pSymA was transferred to plasmid pSmeSM11a. Searching for pSymA-like sequences on other accessory plasmids might broaden our understanding of the evolution and assembly of symbiotic plasmids.
Single-base-pair deletions in the homologous regions of plasmid pSmeSM11a and S. meliloti strain 1021(pSymA) are responsible for the appearance of nonparalogous ORFs.
Detailed sequence analysis revealed that several base pair deletions or insertions in the segment homologous to pSymA are responsible for local differences compared to pSymA of S. meliloti strain 1021, which resulted in prediction of some nonparalogous coding sequences. Six regions, designated regions A to F (Fig. 5A), encode these nonparalogous coding sequences. Since single-base-pair deletions/insertions could be due to sequencing errors in the pSmeSM11a sequence, as well as in the published pSymA sequence, primers were designed to resequence the corresponding regions of both plasmids. Neither the pSmeSM11a sequence nor the sequence of pSymA contains sequencing errors for the local differences mentioned above. Thus, the single-base-pair deletions/insertions occurred during plasmid evolution.
The genetic configuration for the local difference designated region A in Fig. 5A is described below. Deletion of a single base in the pSmeSM11a nucleotide sequence (Fig. 5B, region A) resulted in prediction of coding sequences orf113 and orf114 covering SMa1084 on pSymA. orf113 encodes the C-terminal part of the SMa1084 gene product, whereas orf114 encodes the SMa1084 product N-terminal portion. Likewise, single-base-pair deletions led to prediction of orf119, orf120, orf129, and orf130 in pSmeSM11a (Fig. 5A and B, regions B and D). The genetic configuration is even more complex for the region covered by pSymA degP4 encoding a putative protease-like protein. The corresponding pSmeSM11a nucleotide sequence includes orf125, orf126, and orf127 (Fig. 5A, region C). This local difference is caused by duplication of an internal 232-bp degP4 region and a single-base-pair deletion in the pSmeSM11a sequence (Fig. 5B, region C). Interestingly, Orf125, Orf126, and Orf127 contain a PDZ-metalloprotease domain (cd00989), a PDZ serine protease domain (cd00987), and a trypsin domain (Pfam0089), respectively. All these domains are fused in pSymA DegP4, which thus might be considered a fusion protein.
In contrast to regions A, B, C, and D, regions E and F on pSmeSM11a each contain only a single coding sequence (Fig. 5A). The corresponding regions on pSymA contain two and three genes, respectively. Interestingly, on pSmeSM11a orf133 of region E encodes a putative response regulator consisting of a CheY-like regulatory module and a helix-turn-helix DNA-binding domain (OmpR, COG0745). Similar domains were found in the nitrogen fixation regulator FixJ (SMa1227) that is involved in oxygen control of nitrogen fixation gene expression (61, 75). A single-base-pair deletion in the pSymA sequence led to prediction of SMa1138 and SMa1139 encoding a truncated regulatory module (homologous to the N-terminal OmpR receiver domain) and an effector DNA-binding domain, respectively. The sensor component interacting with the pSmeSM11a FixJ-like response regulator (Orf133) is currently unknown. However, a gene encoding a FixL-like protein (orf135) is located upstream of orf133 on pSmeSM11a, as well as on pSymA (sma1142).
Finally, region F on pSmeSM11a carrying orf144 covers SMa1159, SMa1160, and SMa1161 on pSymA, which is due to a single-base-pair deletion and a single-base-pair insertion in the pSymA nucleotide sequence (Fig. 5A and B, region F).
In summary, local differences in the regions homologous to pSymA indicate that there was divergent evolution that might have led to modified gene products adapted to function under slightly different environmental conditions, thus enhancing genetic flexibility.
A region on pSmeSM11a carrying the nodPQ and tauABCD genes is predicted to be involved in sulfur metabolism and Nod factor biosynthesis.
Region II of plasmid pSmeSM11a contains genes that are probably involved in sulfur metabolism and Nod factor biosynthesis (Fig. 2). It encodes a predicted incomplete ABC-type nitrate/sulfonate/bicarbonate transport system (TauABC) from coordinates 13548 to 17520. The deduced gene products of tauA, tauB, and tauC are 62% to 81% similar to corresponding gene products of Burkholderia fungorum LB400 (accession no. NZ_AAAJ03000005). TauD, which is encoded upstream of tauA, is 73% identical to the tauD gene product of Bradyrhizobium sp. strain BTAi1 (accession no. ZP_00862508). The gene products of tauA, tauB, and tauC encode an ABC-type transport system required for uptake of aliphatic sulfonates, whereas TauD belongs to the TauD/TfdA family of taurine dioxygenases (COG2175, Pfam02668). The pSmeSM11a-encoded ABC-type transporter consists of a truncated permease component (TauC, COG0600), an ATPase component (TauB, COG1116), and a periplasmic substrate binding protein (TauA, COG0715). TauD from E. coli is an
-ketoglutarate-dependent taurine dioxygenase that catalyzes the oxygenolytic release of sulfite from taurine and enables E. coli to use taurine as a sole source of sulfur (37, 71, 72). A functional taurine transporter has been identified in S. meliloti Rm1021(pSymB). It has been shown that this strain is able to utilize taurine as a sole source of carbon and energy for aerobic growth (57). It has been proposed that in S. meliloti Rm1021 taurine probably is first deaminated by a taurine dehydrogenase (TauXY) and then desulfonated through the action of sulfoacetaldehyde acetyltransferase (Xsc) (9). In contrast, strains possessing a taurine dioxygenase (TauD) are able to desulfonate taurine directly (16).
Since S. meliloti Rm1021 is able to use taurine as a sole source of sulfur, the functionality of the pSmeSM11a-encoded tauD gene product could not be determined by growth assays. Mutants with mutations in the proposed S. meliloti Rm1021 taurine degradation pathway are required to analyze taurine metabolism in S. meliloti.
Two other genes, nodP and nodQ, which are probably involved in sulfur metabolism, are located downstream of the tau region. NodP represents subunit 2 of a possible sulfate adenylate transferase, including the phosphoadenosine phosphosulfate reductase family domain (CysH, COG0175, Pfam01507). NodQ is a bifunctional enzyme combining subunit 1 of sulfate adenylyltransferase (COG2895) and adenylylsulfate kinase (COG0529, Pfam01583). It catalyzes the phosphorylation of adenylylsulfate to 3-phosphoadenylylsulfate. NodP and NodQ of pSmeSM11a exhibit the highest levels of identity to the corresponding enzymes of Mesorhizobium loti (71% identity) and Rhizobium sp. strain N33 (62% identity), respectively. NodP and NodQ are involved in sulfation of the oligosaccharide Nod factor that triggers the symbiotic response of the specific host plant. Two copies of nodPQ, both involved in Nod factor sulfation, have been identified in the S. meliloti genome (60). A third nodPQ copy, located on pSmeSM11a, is thought to increase the ratio of sulfated Nod factor, since the formation of the sulfate donor molecule phosphoadenosine 5'-phosphosulfate might be the limiting step in Nod factor sulfation (31, 52).
pSmeSM11a-encoded ACC deaminase is predicted to modulate the level of the phytohormone ethylene.
The acdS gene, which encodes an ACC deaminase, and a gene encoding a leucine-responsive regulator (LrpL) are located between coordinates 69290 and 70932 on pSmeSM11a (orf75 and orf76), representing region III of plasmid pSmeSM11a (Fig. 2). The deduced gene products, AcdS (ACC deaminase) and LrpL, are 99% and 98% identical, respectively, to the corresponding gene products of Rhizobium leguminosarum bv. viciae 128C53K (accession no. AF421376 for AcdS and accession no. AY172673 for LrpL). Rhizobacteria possessing ACC deaminase activity are capable of stimulating plant growth and can be considered plant growth-promoting rhizobacteria (27, 28, 51). Ma et al. (43, 44) described an ACC deaminase of R. leguminosarum bv. viciae 128C53K that promotes nodulation of pea plants. Recently, the R. leguminosarum bv. viciae asdS-lrpL gene region was introduced into S. meliloti Rm1021 to test the influence of these genes on the ability of S. meliloti to nodulate alfalfa (42). The resulting ACC deaminase-producing S. meliloti derivatives formed approximately 40% more nodules in symbiosis with M. sativa (alfalfa) and were much more competitive in nodulating alfalfa than the wild-type strain. Here we describe for the first time acdS and lrpL homologous genes that are present on an accessory S. meliloti plasmid.
The functionality of the ACC deaminase was initially tested by growing the indigenous strain S. meliloti SM11 and strains Rm1021(pACC1) and Rm1021(pSmeSM11aT), as well as control strains Rm1021 and Rm1021(pJP2), in Vincent minimal medium containing 2 mM ACC as the sole nitrogen source. It was found that only strains containing acdS and lrpL were able to grow with ACC as the sole nitrogen source (Table 2). To prove these results, an ACC deaminase activity assay was carried out with the strains mentioned above. As expected, no activity was detected in parental strains Rm1021 and Rm1021(pJP2), whereas strains Rm1021(pACC1), Rm1021(pSmeSM11aT), and SM11 exhibited ACC deaminase activity (Table 2). The level of ACC deaminase activity in S. meliloti Rm1021(pACC1) was similar to the level in S. meliloti Rm1021(pSmeSM11aT), which could have been the result of identical copy numbers of the plasmids in the host strains, whereas the ACC deaminase activity of the indigenous strain S. meliloti SM11 was significantly higher. It could be assumed that there is a different mode of regulation of the Lrp-like protein and/or uptake of ACC in the indigenous strain S. meliloti SM11, resulting in a higher level of expression of ACC deaminase.
|
View this table: [in a new window] |
TABLE 2. Plasmid pSmeSM11a-encoded ACC deaminase activity
|
![]() View larger version (34K): [in a new window] |
FIG. 6. Southern blot hybridization of pSmeSM11a and pSmeBS9a with labeled pSmeSM11aT DNA. Plasmid DNA was restricted with EcoRI and separated on a Tris-acetate-EDTA gel containing 1% agarose. The fragment sizes for digoxigenin-labeled marker VII are indicated on the right.
|
|
View this table: [in a new window] |
TABLE 3. Identification of pSmeSM11a-specific genes in pSmeBS9a by hybridization
|
Plasmid pSmeSM11a has a modular structure with backbone modules for replication/partitioning and mobilization and adjacent long regions carrying accessory genetic modules. Insertion sequences and transposons obviously played an important role in acquisition of at least some of these modules. Plasmid pSmeSM11a carries two replication modules, a repABC replicon and a type A replicator region, indicating that the plasmid probably resulted from fusion of two formerly individual replicons. The presence of two replicons could be important for the host range of the plasmid, assuming that the two replicons function differently in certain host bacteria. It should be pointed out that host range extension broadens the availability of genetic information. Indeed, analysis of the different accessory genes identified in pSmeSM11a suggests that these genes were acquired from different sources. On the other hand, plasmid mobility is important for transfer of the element within the population and between different species and therefore for the acquisition of additional genetic information.
Approximately two-thirds of pSmeSM11a is occupied by accessory genetic modules that could provide adaptive advantages or broaden the host bacterium's responsive spectrum. Plasmid pSmeSM11a carries genes which do not have counterparts in the tripartite S. meliloti Rm1021 genome, such as tauD encoding a taurine dioxygenase and acdS encoding ACC deaminase involved in modulating the level of the phytohormone ethylene. The presence of these genes in the accessory S. meliloti genome could broaden the catabolic capacity or enhance the nodulation competitiveness of the organism. In this context it should be recalled that the original host strain, SM11 harboring plasmid pSmeSM11a, belongs to a dominant subpopulation of nodulating S. meliloti strains that outcompeted released strains in the long-term field release experiment mentioned above. The presence of pSmeSM11a might be responsible for the dominance of strain SM11. Future functional analyses should show whether pSmeSM11a encodes other gene products that influence the adaptation and survivability of host strains in soil and in the plant rhizosphere.
Nevertheless, it is clear that accessory plasmids extend the S. meliloti genome and could provide additional genetic information important for the population. In addition to plasmid pSmeSM11a, S. meliloti strain SM11 contains another accessory plasmid, the 200-kb plasmid pSmeSM11b. Sequence analysis of this plasmid could certainly increase our knowledge of the S. meliloti plasmid complement.
Michael Stiens received a scholarship from the International NRW Graduate School for Bioinformatics and Genome Research in Bielefeld.
Supplemental material for this article may be found at http://aem.asm.org/. ![]()
Present address: Staatliches Umweltamt Düsseldorf, Dezernat 36-Gentechnik, Schanzenstr. 90, D-40549 Düsseldorf, Germany. ![]()
|
|
|---|
-ketoglutarate-dependent taurine dioxygenase from Escherichia coli. J. Biol. Chem. 272:23031-23036.This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»