Previous Article | Next Article ![]()
Applied and Environmental Microbiology, June 2006, p. 4128-4135, Vol. 72, No. 6
0099-2240/06/$08.00+0 doi:10.1128/AEM.00080-06
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
UFZ-Center for Environmental Research Leipzig-Halle, Department of Environmental Microbiology, Permoserstr. 15, 04318 Leipzig, Germany,1 Martin-Luther-Universität Halle, Institut für Mikrobiologie, Kurt-Mothes-Str. 3, 06120 Halle, Germany2
Received 12 January 2006/ Accepted 24 March 2006
|
|
|---|
|
|
|---|
Both MTBE and ETBE have been demonstrated to be degradable by bacteria and fungi (12, 16). However, strains using these oxygenates as the sole source of carbon and energy are rarely found. Bacterial isolates capable of aerobic growth on MTBE include the ß-proteobacterial strains Methylibium petroleiphilum PM1 (20, 35) and Hydrogenophaga flava ENV 735 (21), as well as the gram-positive Mycobacterium austroafricanum IFP 2012 (18). An ETBE-growing strain is Rhodococcus ruber IFP 2001 (15, 22), showing an incomplete degradation. Generally, degradation rates are slow, and growth is inefficient on these substrates.
Until now, the aerobic degradation pathways of MTBE and ETBE have not been fully elucidated. Particularly, biochemical and genetic data are missing. Nevertheless, there is agreement on the first steps of oxidation (Fig. 1) (16, 44, 46). Initially, the methyl and ethyl groups, respectively, are attacked by monooxygenase systems, resulting in unstable hemiacetals. These compounds can spontaneously decompose to tert-butyl alcohol (TBA) and an aldehyde, i.e., formaldehyde or acetaldehyde. On the other hand, it was demonstrated that the hemiacetal derived from MTBE is oxidized to tert-butylformate (TBF), which is further hydrolyzed to TBA and formate (44). In the case of ETBE, analogous reactions would yield TBA and acetate. The intermediate one- and two-carbon aldehydes and acids are expected to be oxidized by conventional dehydrogenase systems. TBA, however, is thought to be hydroxylated, again by the ether monooxygenase or different enzymes, to 2-hydroxy-2-methylpropanol, which is further oxidized by dehydrogenases to 2-hydroxyisobutyric acid (2-HIBA). Until 2-HIBA, the tert-butyl moiety is maintained (Fig. 1), but it can be speculated that this bulky structure is destroyed in the next steps to connect the special fuel oxygenate reactions with the general metabolism and, thus, enable complete oxidation. Unfortunately, the reaction sequence of this central part of the alkyl tert-butyl ether pathways is unclear. Since the work of Steffan et al. (46), three possible reactions have been discussed: (i) dehydration to methacrylate, (ii) hydroxylation to 2,3-dihydroxy-2-methylpropanoate, and (iii) decarboxylation to isopropanol with further oxidation to acetone. The latter proposal is favored by several authors (12, 14, 18, 41), although supporting experimental data are limited. In most studies, it was only demonstrated that isopropanol and acetone are degraded by the strains investigated (11, 18, 27, 46) or that an acetone-oxidizing activity is induced (14, 19). In the case of Mycobacterium vaccae Job5, an intermediate of acetone metabolism, hydroxyacetone, was detected during MTBE degradation (27). However, the enzymes involved in 2-HIBA metabolism or a specific pathway have not been identified thus far.
![]() View larger version (12K): [in a new window] |
FIG. 1. Proposed pathways for the aerobic degradation of the fuel oxygenates MTBE and ETBE (16, 44, 46).
|
|
|
|---|
Media and cultivation techniques.
For testing and growing bacteria on definite substrates as sole source of carbon and energy, the following mineral salt medium was used (in mg/liter): NH4Cl, 761; KH2PO4, 340; K2HPO4, 436; CaCl2 · 6H2O, 5.5; MgSO4 · 7H2O, 71.2; ZnSO4 · 7H2O, 0.44; MnSO4 · H2O, 0.615; CuSO4 · 5H2O, 0.785; Na2MoO4 · 2H2O, 0.252; and FeSO4 · 7H2O, 4.98, which was adjusted to pH 7 and supplemented after autoclaving with the following vitamins (in µg/liter): biotin, 20; folic acid, 20; pyridoxine-HCl, 100; thiamine-HCl, 50; riboflavin, 50; nicotinic acid, 50; Ca-pantothenate, 50; p-aminobenzoic acid, 50; and lipoic acid, 50. To the mineral salt medium, cobalt ions were usually added at 50 µg of cobalt per liter or cobalt was replaced by cyanocobalamin as individually indicated. Substrates were added from aqueous stock solutions. For isolation of strains and purity tests, bacterial cultures were streaked on R2A agar (Merck no. 100416) plates. Generally, liquid cultures were incubated at 30°C on rotary shakers. Appropriate substrate concentrations of up to 1 g/liter and volumes of up to 500 ml of culture medium were applied. In the case of volatile compounds such as ethers and alcohols, close systems (glass serum bottles sealed with butyl rubber stoppers) with sufficient headspace volume to guarantee aerobic conditions were used; in other cases, conic flasks with cellulose stoppers were used. Cobalt- and cobalamin-deficient cultures were obtained by incubation on mineral salt medium for two passages (3% [vol/vol] inoculum) omitting supplementation with cobalt or cobalamin.
Short-term degradation tests.
Strains were grown on TBA, 2-HIBA, 3-hydroxybutyrate, isobutyrate, butyrate, methacrylate, methylmalonate, acetate, or glucose until late exponential growth phase. Cells were then harvested by centrifugation at 6,000 x g and 4°C for 10 min and washed twice with mineral salt solution. To the final cell suspension 50 µg of cyanocobalamin per liter was added. Degradation tests were performed with 25 ml of a cell suspension of 1 to 2 g of biomass (dry weight) per liter in 240-ml serum bottles sealed with butyl rubber stoppers and incubated on a rotary shaker at 30°C. Initial 2-HIBA values were 200 or 500 mg/liter, in the case of low or high activity, respectively. The concentration of 2-HIBA was monitored by sampling at 20-min intervals for a total period of 2 h. Activity values were determined by using linear regression analysis on the decrease of 2-HIBA within this time period.
Preparation of cell extract and enzyme assay.
Biomass was obtained as described for the short-term degradation tests from 2-HIBA and acetate cultures. Cells were suspended in potassium phosphate buffer (50 mM [pH 7.2], supplemented with 10 µM adenosylcobalamin) at about 25 mg of protein per ml and disrupted under nitrogen atmosphere in the dark using stirring glass beads as previously described (40). Then, intact cells and cell debris were removed by centrifugation (20 min, 16,000 x g, twice). The supernatant, hereafter referred to as the cell extract, usually contained 2 to 4 mg of protein per ml and was stored under nitrogen atmosphere at 25°C. Assays were performed within the next few days since storage beyond 3 weeks resulted in nearly complete loss of activity. For measuring the enzymatic transformation activity of 2-HIBA into 3-hydroxybutyrate, cell extracts were mixed with the above-mentioned phosphate buffer, adjusting protein concentrations to 1 to 2 mg of protein per ml. After supplementation with magnesium ions (MgCl2 · 6H2O), ATP (disodium salt, Merck no. 1.01432), and coenzyme A (CoA; trilithium salt, Sigma no. C3019) to final concentrations of 1 mM each, the assays were started by adding 2 g of 2-HIBA per liter. All assays were incubated under nitrogen atmosphere in the dark at 30°C on a rotary shaker. Samples were taken at appropriate time intervals and analyzed for 3-hydroxybutyrate and other possible carbonic acid intermediates and products (Fig. 6).
![]() View larger version (11K): [in a new window] |
FIG. 6. Possible pathways for 2-HIBA degradation using a cobalamin-dependent carbon skeleton-rearranging step catalyzed by ICM. Initially, 2-HIBA may be activated to 2-hydroxyisobutyryl-CoA by acyl-CoA synthetases or CoA transferases.
|
PCR and sequencing.
The 16S rRNA genes of strains L10 and L108 were PCR amplified by using universal eubacterial primers and were bidirectionally sequenced as previously described (8). Sequences of 1,451 nucleotides (28 to 1491 bp, E. coli numbering) were used for similarity searches against the EMBL and GenBank databases. The icmA and icmB genes of strain L108 were PCR amplified by using primers derived from the corresponding sequences of strain PM1 (NZ_AAEM01000010, gene 85642.87330 and gene 82790.83200). DNA of L108 was prepared as previously described (24). For icmA, the following primers were used: ICMA_f (5'-ATGACCTGGCTTGAGCCGCA-3'), ICMA_r (5'-GCGAGACGCCGGTCTTCTGA-3'), ICMA_M_f (5'-GAGAAGCGCGGCTACGACCT-3'), and ICM_M_r (5'-TCCTCGGTCGGGATCGCGAA-3'). PCR with ICMA_f and ICMA_r gave the complete fragment, whereas in combination with ICM_M_f and ICM_M_r overlapping intermediary fragments were produced. For icmB, the primers ICMB_f (5'-ATGGACCAAATCCCGATCCGC-3') and ICMB_r (5'-TCAGCGGGCGCCGCGCGCGG-3') were used, producing the complete fragment. Fragments were gel purified and sequenced according to the method of Sanger et al. (42) using an ABI Prism 310 genetic analyzer (PE Applied Biosystems). Only high-quality reads were considered, and each sequence was determined twice. The comparison of sequences with DNA and protein sequences in databases was performed with BLAST (2) (http://www.ncbi.nlm.nih.gov/blast). Multiple sequence alignments were performed with CLUSTAL W (23; http://www.ebi.ac.uk/clustalw/).
Chemical and other analyses.
The concentrations of MTBE, TBA, and carbonic acids were determined by gas chromatography (GC). In all cases, standards of the pure chemicals were used for calibration. MTBE and TBA were analyzed by using an HP 6890 GC system from Agilent Technologies (Waldbronn, Germany) with an HP-5 column (30 m by 0.25 mm by 0.25 µm) and a flame ionization detector. Vials (10-ml headspace) were filled with 2 ml of liquid sample and incubated at 70°C for 20 min before 1 ml of gas phase was removed and injected into the GC system by using an HP 7694 autosampler. The carrier gas was helium, and the oven and detector temperatures were 35 and 200°C, respectively. Carbonic acids were analyzed by the same GC system using liquid injection mode (1 µl) and an Optima-FFAP column (25 m by 0.25 mm by 0.25 µm; Macherey-Nagel, Düren, Germany). 2-HIBA, 3-hydroxybutyrate, and methylmalonate were quantified with a detection limit of 0.5 mg per liter as methyl esters by modifying a published method (30). Samples (800 µl) were incubated with acidic methanol (400 µl containing 3% [vol/vol] sulfuric acid) for 2 h at 95°C. The esters formed were extracted with chloroform (400 µl).
-Butyrolactone was used as internal standard. The GC oven program was 90°C for 2 min, 90 to 220°C over 3.71 min, and finally 2 min at 220°C. Methacrylate, isobutyrate, butyrate, and crotonate were quantified as free acids (6) with a detection limit of 1 mg per liter. Samples (1,000 µl) were saturated with NaCl, acidified with 3 M sulfuric acid (50 µl), and extracted with ethyl acetate (600 µl). Hexanoate was used as internal standard. The GC oven profile was 90°C for 2 min, 90 to 175°C over 1.31 min, 175 to 220°C over 1 min, and finally 2 min at 220°C. The reproducibility of the GC concentration analyses was within a standard deviation (SD) of 5%. Generally for carbonic acid analysis, an NaOH solution was added to samples at a final concentration of 50 mM in order to stop reactions. In the case of growth experiments and short-term activity tests, cells were removed by centrifugation prior to further sample processing. Samples were then stored at 25°C until preparation for GC measurements. If butyl rubber-sealed glass bottles were used for experiments, sampling was performed by plastic syringes removing an appropriate volume from the liquid phase. Cell growth was monitored by measuring the optical density at 700 nm (OD700) of the culture broth in a 1-cm cuvette and by measuring the dry weight of cells (by incubation at 100°C until reaching constant weight). Biomass values were also calculated from OD700 data after determining the relation between the OD and the dry weight for the investigated strains (an OD700 value of 2.15 was equal to 1 g of dry weight per liter). Cell protein concentrations were determined by the Lowry protein assay (31) for two-dimensional electrophoresis and by the Bradford method for the enzyme assay (7).
Nucleotide sequence accession numbers.
The nearly complete 16S rRNA, icmA, and icmB gene sequences of strain L108 have been deposited in the GenBank/EMBL/DDBJ database under the accession numbers DQ436455, DQ436456, and DQ436457, respectively.
|
|
|---|
Cobalt/cobalamin dependence of tert-butyl moiety degradation.
As already described for strain CIP I-2052 growing on TBA (37), all three strainsL108, L10, and CIP I-2052generally showed an exceptional demand for the trace element cobalt when grown on substrates containing the tert-butyl moiety. Substrates tested in the present study were TBA and 2-HIBA for all strains and MTBE in the case of L108. In cobalt-deficient medium, degradation rates and growth yields were significantly reduced. However, such a cobalt dependence was not observed with simple growth substrates such as glucose, acetate, and 3-hydroxybutyrate (data not shown). Cobalt can be replaced by cobalamin, as was studied in detail for the growth of strain L10 on 2-HIBA (Fig. 2). Furthermore, compared to the cobalt-containing cultures, cobalamin addition decreased the doubling times on 2-HIBA from about 13 to 5 h and on TBA from about 13 to 9 h, whereas growth yields were not affected (Table 1). Only insignificant growth occurred in the absence of cobalt and cobalamin under these conditions (data not shown).
![]() View larger version (15K): [in a new window] |
FIG. 2. Growth on 2-HIBA in mineral salt medium supplemented with either 100 µg of cyanocobalamin or 50 µg of cobalt ions per liter (filled and open symbols, respectively). 2-HIBA concentrations (circles) and dry weight biomass (triangles) were measured for batch cultures of strain L10 using a cobalt- and cobalamin-deficient inoculum. The data represent the mean values and SD of four replicates.
|
|
View this table: [in a new window] |
TABLE 1. Growth parameters of strains L10 and CIP I-2052 on 2-HIBA and TBA, incubated with either cobalt ions or cobalamin
|
![]() View larger version (11K): [in a new window] |
FIG. 3. Degradation of TBA (a) and concomitant accumulation of 2-HIBA (b) in mineral salt medium supplemented with 1, 5, or 50 µg of cyanocobalamin per liter and using a cobalt- and cobalamin-deficient culture of strain L10. The data represent the mean values and SD of four replicates.
|
Comparative proteome analysis.
Based on the findings of the inducibility tests, proteome analyses were done comparing total proteins of strain L108 grown on MTBE, TBA, 2-HIBA, and acetate. In two-dimensional sodium dodecyl sulfate-polyacrylamide gels, one small protein was identified occurring exclusively in crude extracts derived from MTBE-, TBA-, and 2-HIBA-grown cells (data not shown). An MS/MS ion search gave as the closest match, with a MASCOT score of 50, a gene sequence found in the finished genome of M. petroleiphilum PM1 (http://genome.jgi-psf.org/finished_microbes/metpe/metpe.home.html; AAEM00000000) coding for a 136-amino-acid protein. Automated GeneMark analysis had predicted this protein (ZP_00242467) to be a C-terminal domain/subunit of methylmalonyl-CoA mutase (MCM; EC 5.4.99.2) binding the coenzyme cobalamin. However, thus far identified prokaryotic MCMs are organized as homo- or heterodimers with a subunit size of about 700 amino acids and without having the substrate- and cobalamin-binding domain on different polypeptides (6, 48). Furthermore, sequence alignment analysis revealed a high similarity score (54% identity of amino acid residues) to the small subunit of isobutyryl-CoA mutase (ICM; EC 5.4.99.13) of Streptomyces cinnamonensis A3823.5 (AJ246005), a cobalamin-dependent mutase that is organized as a large substrate-binding 566- and a small cobalamin-binding 136-amino-acid subunit (IcmA and IcmB, respectively) (39, 52). This finding lets us assume that the identified protein was IcmB and not a subunit of MCM. Consequently, a sequence coding for an IcmA-like 562-amino-acid polypeptide (ZP_00242470) showed the closest match with BLAST analysis using IcmA of S. cinnamonensis A3823.5 (AAC08713) as a query sequence against the complete genome of M. petroleiphilum PM1.
Enzyme assay for 2-HIBA isomerization.
The identification of a cobalamin-binding protein being induced by 2-HIBA and with high similarity to the small subunit of ICM raised the question of whether a carbon skeleton rearrangement was involved in 2-HIBA degradation. To answer this question, an adequate enzyme assay was performed comparing the activity of cell extracts from induced and noninduced cells of strains L10 and L108. In this experiment, it was found that extracts from 2-HIBA-grown cells showed production of 3-hydroxybutyrate from 2-HIBA (Fig. 4), whereas a similar activity was not observed in material derived from acetate-grown cells (data not shown). Furthermore, transformation of 2-HIBA into 3-hydroxybutyrate was only achieved in the presence of ATP and free CoA, indicating the necessity of an activating thioester formation, i.e., 2-hydroxyisobutyryl-CoA, prior to the isomerization reaction. Formation of 3-hydroxybutyrate was not accompanied by the detection of possible intermediates (as indicated in Fig. 6) such as methacrylate, isobutyrate, butyrate, or crotonate.
![]() View larger version (14K): [in a new window] |
FIG. 4. Transformation of 2-HIBA into 3-hydroxybutyrate in cell extracts of 2-HIBA-grown cells of strain L108. The complete assay contained 2-HIBA, CoA, and ATP, whereas in the other cases either CoA or ATP was omitted. The SD of the replicates was within 5% (not shown).
|
![]() View larger version (17K): [in a new window] |
FIG. 5. A CLUSTAL W alignment of a 30-amino-acid segment of the ICM large subunit (IcmA) of Methylibium petroleiphilum PM1 (ZP_00242470), with the corresponding sequences of the four closest BLAST matches using the complete IcmA sequence of strain PM1 as a query against the NCBI database (in descending order): Rhodobacter sphaeroides ATCC 17029 (EAP67072), Xanthobacter autotrophicus Py2 (EAS17594), Nocardioides sp. strain JS614 (EAO08692), and Roseovarius sp. strain 217 (EAQ26421) (for complete search results, see the supplemental material). For comparison, alignment with the corresponding ICM and MCM sequences of S. cinnamonensis (AJ246005) and P. shermanii (X14965), respectively, is also shown. Amino acids that are conserved in all sequences are indicated under the sequence by asterisk. Residues in boldface represent the reactive site position proposed to play an important role in substrate binding and reaction mechanism of both ICM and MCM (32, 39, 50).
|
|
|
|---|
The involvement of ICM in the degradation of 2-HIBA may be covered by two possible pathways (Fig. 6). According to the original proposal of Steffan et al. (46), 2-HIBA can be dehydrated to methacrylate, presumably only after thioester formation as 2-hydroxy carbonic acids are quite resistant against dehydration (29). The resulting methacrylyl-CoA is then reduced to isobutyryl-CoA, which is isomerized to butyryl-CoA by ICM. Butyryl-CoA can be dehydrogenized to crotonyl-CoA and, after the addition of water, 3-hydroxybutyryl-CoA is formed. The alternative route uses only two steps. After thioester activation of 2-HIBA, 3-hydroxybutyryl-CoA is formed by ICM, moving the carbonic acid group from the tert-carbon atom to a primary one. Our results clearly favor the latter proposal, using a direct ICM-catalyzed isomerization of 2-HIBA, for the following reasons. (i) During cobalt- and cobalamin-deficient TBA degradation, only 2-HIBA temporarily accumulates but other possible carbonic acid intermediates are not detected. This indicates that directly the 2-HIBA transforming step is cobalamin dependent. (ii) The inducibility tests show only low 2-HIBA degradation activity in methacrylate- and methylmalonate-grown cells, ruling out the methacrylate pathway of Fig. 6 and the involvement of MCM, respectively. However, activity is significantly induced in cells grown on 2-HIBA or isobutyrate, which are possible substrates for ICM. (iii) We demonstrated the enzymatic transformation of 2-HIBA to 3-hydroxybutyrate in cell extracts of induced cells without the formation of any intermediates.
A notable consequence of the use of a cobalamin-containing enzyme for a dissimilatory pathway is the demand for cobalt. From the amount of cobalamin necessary for an unlimited growth on 2-HIBA, it can be calculated that about 5 µg of cobalt is sufficient for an efficient degradation of 1 g of a compound containing the tert-butyl group. Therefore, it can be recommended that at least this amount of cobalt has to be bioavailable when MTBE or ETBE contaminations should be rehabilitated by using strain L108 or bacteria with a similar pathway. In addition, at least on TBA and 2-HIBA, the biosynthesis of cobalamin determines the growth rate, as demonstrated by the increasing doubling times when the strains grow in the presence of free cobalt instead of cobalamin. This finding can be explained by the enormous metabolic burden of cobalamin de novo synthesis, requiring the activity of more than 30 genes (33), when it has to be produced for a dissimilatory enzymatic step.
The discovery of a carbon skeleton rearrangement in the degradation pathway of 2-HIBA identified a 2-HIBA-transforming step at the biochemical and genetic level. As well, it is only the second enzyme besides the monooxygenase found in R. ruber IFP 2001 (9) proved to be involved in the aerobic degradation of MTBE and ETBE. Thus far, the cobalt demand of other fuel oxygenate-degrading isolates has not been sufficiently studied. In most cases, which include M. petroleiphilum PM1, the growth medium contains excess cobalt (20, 21). Only the MTBE degrader M. austroafricanum IFP 2012 demonstrates similar cobalt dependence. However, the authors of that study (18) stated that cobalt cannot be replaced by cobalamin, thus probably excluding the involvement of the mutase pathway in this strain. On the other hand, the fact that M. petroleiphilum PM1 possesses ICM genes nearly identical to the ones of strain L108 let us postulate that in both strains 2-HIBA is processed via the described mutase reaction. In the future, this assumption has to be proved by physiological and biochemical analyses, including the testing of ICM defective mutants. In addition, the high similarity of the ICM sequences implies that a horizontal gene transfer has occurred between the two strains. This may also suggest that the ICM pathway plays a widespread role in fuel oxygenate degradation since PM1-like bacteria have been detected at several MTBE-contaminated sites (26, 28). Consequently, further investigations now under way will elucidate the distribution of the ICM genes and activities among other fuel oxygenate-degrading strains.
Although 2-HIBA is rarely found in nature, it is not strictly related to MTBE and ETBE metabolism. The plant cyanoglycoside linamarin (17) is synthesized and decomposed via 2-hydroxyisobutyronitrile, which normally hydrolyzes to cyanide and acetone (3, 4). Theoretically, by the action of nitrilase or a combination of nitrile hydratase and amidase (4), 2-HIBA could be produced from the nitrile. However, there is no evidence for a bacterium capable of growing on hydroxyisobutyronitrile and using the mentioned nitrile-degrading enzymes. A second oxygenate-independent source of 2-HIBA is the industrial synthesis of methacrylate. In the classical acetone cyanohydrin process, 2-HIBA is a by-product and, consequently, is found in wastewaters from methacrylate-producing plants. Interestingly, there exists one study on the bacterial conversion of 2-HIBA and its methyl ester from such a wastewater to polyhydroxybutyrate (25), which is generally synthesized by polymerization from 3-hydroxybutyrate. The authors of that study proposed a degradation pathway via pyruvate and acetyl-CoA, though without any physiological or biochemical evidence. However, exactly for the transformation of 2-HIBA to 3-hydroxybutyrate, we describe here the responsible mutase reaction which is probably also involved in the bacterial process previously described by Holowach et al. (25). Industrial methacrylate production started in the mid-1930s in Great Britain, Germany, and the United States (10), giving bacterial evolution more time to adapt for 2-HIBA degradation than to degrade fuel oxygenates. In this scenario, a carbon skeleton mutase like the ICM of Streptomyces spp. broadens its substrate spectrum for 2-HIBA. The preliminary results presented in the present study suggest that the replacement of the Phe residue (39) with Ile at position 80 (Fig. 5) could be one of the mutations necessary for the capability to react with 2-HIBA. Interestingly, this replacement is also found in a few other ICM-like sequences (Fig. 5). However, it is not known whether other ICMs or related enzymes can transform 2-HIBA. Thus far, substrate binding has been studied only for MCM in detail. Here the corresponding Tyr residue interacts via its hydroxyl group with the free carbonic acid of the substrate methylmalonyl-CoA (32, 50). In the ICM of Streptomyces spp., a similar role is proposed for the hydrophobic phenyl group of the Phe residue in binding isobutyryl-CoA (39). In contrast to this, the additional hydroxyl group in 2-hydroxyisobutyryl-CoA possibly resulted in a requirement of smaller residues such as those of Ile or Val. Consequently, at the moment we are investigating the reactivity of Streptomyces ICMs, as well as of other ICM-like enzymes against 2-HIBA. In addition, the contribution of the active-site residue Ile in the ICM of strain L108 to the transformation of 2-HIBA will be evaluated by site-directed mutagenesis converting this Ile residue to Phe.
We thank F. Fayolle and F. Monot (IFP) for providing strain CIP I-2052. In addition, we are indebted to D. Brodkorb and A. Sturm (University Halle-Wittenberg) for 16S rRNA gene analysis; to K. Czamperla, R. Pfeiffer, and A. Steude (UFZ) for technical assistance in the enzyme assay experiments; and to B. Würz (UFZ) for excellent analytical advice. Finally, we thank U. Karlson (NERI) for help with sampling the Leuna groundwater.
Supplemental material for this article may be found at http://aem.asm.org/. ![]()
|
|
|---|
-amino acids by anaerobic bacteria. FEMS Microbiol. Rev. 28:455-468.[Medline]This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»