Applied and Environmental Microbiology, July 2008, p. 4241-4245, Vol. 74, No. 13
0099-2240/08/$08.00+0 doi:10.1128/AEM.00940-08
Copyright © 2008, American Society for Microbiology. All Rights Reserved.

Center for Infectious Diseases and Vaccinology, The Biodesign Institute and School of Life Sciences, Arizona State University, Tempe, Arizona 85287
Received 24 April 2008/ Accepted 5 May 2008
|
|
|---|
Red recombination and counterselective screening (sacB gene) and can be used for genetic modification of Y. pestis to construct live attenuated vaccines. |
|
|---|
The
Red system is a simple method for disrupting chromosomal genes using PCR products in Escherichia coli (7, 14, 15) and Salmonella enterica (12). Subsequently, Derbise et al. introduced an improvement by using long flanking sequences to disrupt genes in Yersinia pseudotuberculosis (9). However, disrupting genes by either method leaves antibiotic markers (17) or FLP recombination target (FRT) site scars in the bacterial chromosome (7). Antibiotic resistance markers cannot be used when working with a select agent, such as Y. pestis (Centers for Disease Control and Prevention, unpublished report), or for construction of live vaccines. The presence of FRT scars, typically 82 to 85 bp in length, could become problematic if one were to use this system to introduce multiple mutations. In the standard system, each incoming PCR product encodes a selectable antibiotic resistance marker flanked by FLP sites, the source of FRT scars. Therefore, the scars could serve as recombinational hot spots at each successive step in strain construction, reducing the frequency of obtaining the desired insertion (7). Use of the Flp recombinase in a cell that carries two nearby scars could lead to an unwanted deletion of the intervening sequence (7). Finally, the presence of multiple scars in the chromosome could lead to chromosomal rearrangements or deletions resulting from recombination events between FRT scars, even in the absence of the Flp recombinase (7). This latter possibility is of concern to the FDA and could therefore hinder licensure of a live bacterial vaccine possessing multiple mutations constructed using this method.
Some researchers have successfully used suicide vectors to disrupt genes in Y. pestis (1, 18). We were unable to delete the relA and spoT genes from Y. pestis using either suicide vectors or the standard
Red method. Here, we have combined elements of both systems to develop a highly efficient method for introducing gene deletions free of antibiotic markers and FRT scars and for markerless gene insertion.
Tables 1 and 2 list the bacterial strains, plasmids, and oligonucleotide primers used in this study. Y. pestis strains were grown in heart infusion broth (HI broth) and on plates containing HI broth, Congo red, and agar at 30°C (1). For screening, Y. pestis electroporants were spread or streaked onto Tryptose blood agar (TB agar) plates containing 10 µg/ml chloramphenicol (Cm) and/or 5% sucrose. Y. pestis was grown at 30°C for 24 h with shaking (liquid media) or for 48 h (solid media). General DNA isolation and enzymatic manipulation were performed as described previously (19). The targeted region of each of the final constructs was verified for the expected DNA sequence by PCR and DNA sequence analyses.
|
View this table: [in a new window] |
TABLE 1. Bacterial strains and plasmids used in this study
|
|
View this table: [in a new window] |
TABLE 2. Oligonucleotide primers used in this work
|
500 bp) of DNA homologous to the regions flanking the deletion site is prepared. The DNA fragment is electroporated into the desired host containing plasmid pKD46, which encodes the genes required for
Red recombination (Table 1) (7). The targeted gene is then replaced by homologous recombination. Cells carrying the desired insertion/deletion are selected on media containing Cm. In the next step (Fig. 1B), a second DNA fragment encoding the desired deletion is prepared and used to electroporate pKD46-containing host cells. Replacement of the cat-sacB cassette is selected for on media containing sucrose (13). Sucrose-resistant electroporants are then screened for sensitivity to chloramphenicol and by PCR for the deletion. This process can be repeated as many times as necessary to construct a strain with multiple deletion mutations. When all the mutations have been made, pKD46 can be removed by growing the mutant at 37°C in the appropriate medium (3).
![]() View larger version (18K): [in a new window] |
FIG. 1. Schematic strategy for markerless deletion of a target chromosomal gene by two-step recombination. Cross-grained regions represent homology between the integration cassettes and sequences flanking the target gene. (A) A DNA fragment carrying the cat-sacB genes flanked by two long regions homologous to the DNA sequences bordering the target site is integrated into the chromosome to disrupt or delete the target gene(s). (B) A DNA fragment carrying the desired deletion or insertion flanked by two long regions homologous to the DNA sequences bordering the target sites directs replacement of the cat-sacB genes through homologous recombination.
|
relA233 deletion and DNA sequences flanking the relA gene.
![]() View larger version (22K): [in a new window] |
FIG. 2. Construction of a relA mutation in Y. pestis KIM6+. (A) A DNA fragment encoding a cat-sacB cassette flanked by long regions homologous to genes just upstream and downstream of relA is introduced into Y. pestis KIM6+(pKD46). Selection on media containing chloramphenicol yields a strain in which relA is replaced by the cat-sacB cassette. The positions of oligonucleotide primers, such as relA-U1, relA-D1, relA-V1, and Cm-V, are indicated. (B) A DNA fragment containing the relA233 deletion and flanking regions adjacent to relA is introduced into the Y. pestis KIM6+(pKD46) cat-sacB strain. After selection on media containing sucrose, the cat-sacB cassette is replaced by the fragment containing the relA233 deletion.
|
300 sucrose-resistant colonies and randomly selected 30 colonies. Twenty-six were PCR positive for the expected deletion, an efficiency of
86%. A single colony isolate was chosen and designated
relA233 KIM6+(pKD46). Plasmid pKD46 was cured by growth at 37°C to yield strain
10003.
To further validate this methodology, we introduced a second deletion,
spoT85, into strain
relA233 KIM6+(pKD46) using a similar strategy. The efficiency at each step was similar to those reported above. Plasmid pKD46 was cured from a single colony isolate of the resulting strain to yield
10004. These results show that this is a highly efficient method for introducing one or more gene deletions into Y. pestis.
Because of our interest in studying the effects of spoT on virulence in Y. pestis, we wanted to construct a strain in which spoT expression could be regulated at will. The spoT gene is expressed in an operon after rpoZ (8). We inserted the arabinose-regulated PBAD promoter (11) between the rpoZ and spoT genes as outlined in Fig. 3. To ensure translation of spoT, we included the ribosome-binding sequence from the E. coli K-12 araB gene (GGAGTG) (21) 5 bp upstream of the start codon. The yields from this construction were similar to those described above.
![]() View larger version (21K): [in a new window] |
FIG. 3. Construction of an arabinose-regulated spoT gene in Y. pestis KIM6+. The transcription terminator (TT) araC PBAD-Shine-Dalgarno (SD) sequence was inserted upstream of the spoT gene in the chromosome of relA233 KIM6+(pKD46). The steps involved are analogous to those described in the legend to Fig. 2. The positions of oligonucleotide primers, such as spoT-U1, spoT-P1, spoT-V1, and Cm-V, are indicated. (A) Insertion of sacB-cat TT araC PBAD-SD spoT just after rpoZ. (B) Excision of the sacB-cat cassette.
|
We have described a strategy to generate scarless deletion and insertion mutations into the Y. pestis chromosome with high efficiency. In addition, we have eliminated the need to introduce a plasmid such as pCP20 that carries the Flp recombinase (4) which constitutes an additional electroporation and subsequent plasmid curing cycle. By obviating this need, plasmid pKD46 does not have to be cured and reintroduced for each mutagenic step. Therefore, multiple genes can be successively deleted more rapidly than with the traditional
Red method. While this new method should be applicable to any Y. pestis strain, we note that for workers using Y. pestis strains that carry plasmid pCD1, curing of plasmid pKD46 should be done in medium containing 2.5 mM calcium (2). We have also successfully applied our strategy to other gram-negative bacteria, such as E. coli and Salmonella enterica serovars Typhi, Typhimurium, and Paratyphi A, demonstrating the broad utility of this method.
This research was supported by National Institutes of Health grant AI57885.
Published ahead of print on 16 May 2008. ![]()
|
|
|---|
recombination functions to promote gene replacement in Escherichia coli. J. Bacteriol. 180:2063-2071.This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»