![[Feedback]](/icons/banner/feedbackACT.gif){kind=icon}
![[For Subscribers]](/icons/banner/subscriberACT.gif){kind=icon}
![[Archive]](/icons/banner/archiveACT.gif){kind=icon}
![[Search]](/icons/banner/searchACT.gif){kind=icon}
![[Contents]](/icons/banner/tocACT.gif){kind=icon}
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Previous Article | Next Article 
Applied and Environmental Microbiology, March 2008, p. 1324-1331, Vol. 74, No. 5
0099-2240/08/$08.00+0 doi:10.1128/AEM.01901-07
Copyright © 2008, American Society for Microbiology. All Rights Reserved.
Laboratories of Applied Biosciences, Graduate School of Science and Technology, Niigata University, Niigata 950-2181, Japan
Received 13 June 2007/ Accepted 28 December 2007
 |
ABSTRACT |
|---|
 Top ABSTRACT INTRODUCTIONMATERIALS AND METHODSRESULTSDISCUSSIONREFERENCES |
|---|
-helix structure. When bound to Chlide, the β-structure content in the complex is reduced to 21.6% ± 3.1% (n = 5). Since Chlide had no secondary structure, the observed reduction suggests significant conformational changes of P252 during the formation of Bm252RFP complex. Bm252RFP had antimicrobial activity against Escherichia coli, Serratia marcescens, B. thuringiensis, and Saccharomyces cerevisiae with 50% effective concentrations of 2.82, 2.94, 5.88 µM, and 21.6 µM, respectively. This is the first report ever to show clear, concrete binding characteristics of the midgut protein to form an RFP having significant antimicrobial activity. |
INTRODUCTION |
|---|
|
TopABSTRACTINTRODUCTIONMATERIALS AND METHODSRESULTSDISCUSSIONREFERENCES |
|---|
-helices in domain I of Cry1A toxins penetrate into the brush border membrane (BBM) of midgut epithelial cells. Then, by small-pore formation on the BBM, these cells lose their homeostasis, ultimately leading to the insect's death (7, 22, 45). To understand the complete insecticidal mechanism, we have been interested in elucidating the interaction between epithelial cell membrane proteins and Cry toxins. During the search for the Cry toxin binding proteins, we found 252-kDa proteins in the membrane of epithelial cells from the Bombyx mori midgut (14-16). The protein (P252) was purified from a Triton X-100 soluble fraction of BBM vesicles (BBMVs) of B. mori, and it was purified to homogeneity by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and gel filtration chromatography. It was shown to have a molecular mass of 252 kDa by SDS-PAGE. But the molecular size of about 985 kDa obtained from gel filtration chromatography suggests that the protein could be a homotetramer, and this P252 was shown to bind strongly with Cry1Aa, Cry1Ab, and Cry1Ac toxins of B. thuringiensis with 30, 180, and 20 nM Kd (dissociation constant) values, respectively (15). Antiserum to the APN with a molecular weight of 120,000 and anti-BtR175 (a cadherin-like protein) antiserum did not recognize P252, and its novelty was suggested; in fact, a homology search using a database for an internal peptide from P252 did not match any sequence.
However, recent database information indicated that three internal peptides derived from P252 have 94 and 100% homology in amino acid sequence with a chlorophyllide (Chlide) binding protein (CBP) (EMBL accession no. AM113746.1). Recently, the same authors reported this CBP to be a novel member of the lipocalin family with 15 lipocalin polypeptide chains; the protein was subsequently named polycalin (26). The investigators characterized this protein by deduced amino acid sequences after they cloned a 302-kDa protein. However, binding between their CBP and Chlide was not experimentally proved, nor were the biochemical characteristics and the physiological role of this red fluorescent pigment protein complex shown.
The silkworm, B. mori, has been examined for the presence of antiviral factors, and activity against B. mori nuclear polyhedrosis virus (BmNPV) factor was reported to be present in the digestive juice of the silkworm (2, 10, 29, 30, 32). Antimicrobial factors were also reported to be present in silkworms (44). Almost 4 decades ago, Aizawa et al. (2) first reported that antiviral activities against BmNPV factors were related to red fluorescence proteins (RFPs). It was reported that RFP could be obtained in vitro from midgut protein and Chlide a, a prosthetic group derived from chlorophyll (Chl) a. Eventually the anti-BmNPV activity was attributed to Chlide a rather than the protein, and it was shown that CBP changed to RFP by binding with Chlide (11).
The molecular size of RFP was first suggested to be large since the protein was eluted at void volume in Sephadex G-200 column chromatography (27). But various RFPs such as 65-kDa RFP (29), 24-kDa serine protease, 30-kDa lipase RFP (30, 32), and recently a 302-kDa lipocalin (26) were reported. Thus, it is reasonable to assume that RFPs with various molecular sizes exist in the digestive juice and/or midgut tracts of insect larvae. Though diversity exists in molecular size, activity, and characteristics, all these reported RFPs were suggested to be derived from the binding between Chlide and insect midgut proteins.
The actual midgut protein(s) which forms RFP and its characteristics is not clear except for the above-cloned 302-kDa lipocalin RFP from midgut searched from the deduced amino acid sequence database. Since the midgut protein P252 shares sequence similarity with the 302-kDa CBP, we carried out binding experiments to explore the possibility of RFP in vitro chemical synthesis by binding with Chlide. This is the first report that presents clear evidence that B. mori midgut membrane protein P252, which has a strong affinity to Cry1A from B. thuringiensis, is also indeed a CBP. Also, this is the first report that successfully shows that antimicrobial activity is exhibited by the B. mori midgut membrane protein P252 that binds to Chlide to form red fluorescent protein, termed Bm252RFP, against Escherichia coli, Serratia marcescens, B. thuringiensis, and even against Saccharomyces cerevisiae.
|
MATERIALS AND METHODS |
|---|
|
TopABSTRACTINTRODUCTIONMATERIALS AND METHODSRESULTSDISCUSSIONREFERENCES |
|---|
Culture of microbes and Cry1A toxin production.
E. coli JM109, S. marcescens 2170 (a gift from T. Watanabe, Niigata University), and B. thuringiensis subsp. sotto strain T84A1 (a gift from M. Ohba, Kyushu University) were cultured in Luria-Bertani (LB) medium for the antibacterial activity assay. The yeast S. cerevisiae (a gift from Y. Nakagawa, Niigata University) was cultured with yeast malt broth (YMB) medium (9).
Both B. thuringiensis subsp. sotto strain T84A1 and B. thuringiensis subsp. kurstaki HD-73 were cultured for production of Cry1Aa and Cry1Ac, respectively, in NYS medium (37). Cry1Ab was obtained from the transformed E. coli JM109 harboring plasmid pYD4.0 encoding cry1Ab (a gift from K. Kanda, Saga University) cultured in LB broth containing 50 µg of ampicillin/ml (19). The insecticidal crystal proteins obtained as above were solubilized and activated with immobilized trypsin as described previously (18) and purified as according to Hossain et al. (15).
Purification of P252 from BBMVs of B. mori.
BBMVs of midgut of B. mori were prepared as described by Wolfersberger et al. (42), and BBMV proteins were solubilized with 1% Triton X-100 according to Shitomi et al. (36). P252 was purified from the soluble BBMV proteins by gel filtration and ion exchange column chromatography and was homogeneous in SDS-PAGE and gel filtration chromatography (15).
Sequence of P252 internal peptides.
The N terminus of P252 was shown to be blocked, and internal peptides were prepared with trypsin and V8 proteases as described by Hossain et al. (15); amino acid sequences of the three peptides were determined according to Shitomi et al. (36).
Preparation of Chlide.
Chlide a was prepared periodically from fresh spinach obtained from a local market, as its stability can be maintained only up to around 20 days at –20°C. The prepared Chlide was compared with the commercial Chlide, purchased from Sigma Aldrich Chemicals (St. Louis, MO). Chl and chlorophyllase were prepared according to the method of Pineau et al. (31) from fresh spinach and Chlide was obtained from the reaction of Chl with chlorophyllase as described by Ardao and Vennesland (3). Chl content was estimated with Arnon's equation (4).
The Chlide generated was separated with thin-layer chromatography (TLC) using precoated TLC plates (Silica Gel 60; Merck, Darmstadt, Germany) with a developing solvent of ethyl acetate-ethanol-methanol (80:20:10, vol/vol/vol) and visualized with UV light (360 nm) according to the method of Aiga and Sasa (1). The band with an Rf value of 0.41 was recovered as Chlide (see Fig. 1B, band 1) and the solvent was evaporated on a rotary evaporator. This Chlide was then suspended again in 50 mM Tris-HCl, pH 8.0, containing 100 mM NaCl and used in various experiments.
|
In vitro incubation of P252 and Chlide to form P252-Chlide complex.
Various concentrations of purified P252 (0, 0.4, 0.8, and 1.0 µM) were incubated with 50 µM Chlide under aerobic conditions in the presence of light (aerobic-light) for 60 min at 25°C in a total volume of 1 ml of 50 mM Tris-HCl containing 100 mM NaCl, pH 8.0. The reactants were analyzed with scanning absorbance spectra using a UV-visible light spectrophotometer (UV 160-U; Shimadzu, Kyoto, Japan) with a wavelength scan from 500 nm to 700 nm. The experiment was done in an open-air bench under light at about 520 lx, equivalent to about 6,000 µmol m2 s–1.
The incubation was also done under aerobic-dark, anaerobic-light, and anaerobic-dark conditions to check the effect of air and light on binding reactions. Experiments in the dark were carried out inside a dark room with a safety red lamp, and for further safety, all glass containers were wrapped with aluminum foil. Experiments under anaerobic conditions were performed under streaming N2. P252 and Chlide were also incubated at various temperatures from 20 to 45°C.
HPLC analysis of reactant with fluorescence scanning spectra.
The incubation of P252 and Chlide was done as above, and reactants were lyophilized and redissolved into a small amount of 50 mM Tris-HCl, pH 8.0, containing 100 mM NaCl. The reactants were applied to an HPLC instrument (model HP-1100; Hewlett-Packard, Toronto, Canada) equipped with a C18 column, 250 by 4.6 mm with a 5-µm particle size (model 201TP54; Vydac, CA), and elution profiles were detected by a fluorescence spectrophotometer (RF-5301 PC; Shimadzu, Kyoto, Japan) connected to an 18-µl flow cell. Reactants were eluted with 0.1 M Tris-HCl buffer (pH 7.2) containing 0.1% SDS and 0.1 M NaCl as described previously (25). The fluorescence spectrum was obtained by exciting the samples at 495 nm and scanning between 500 to 700 nm at 25°C.
Hill analysis on the binding of P252 with Chlide.
P252 at a concentration of 1 µM was incubated with different concentrations of Chlide ranging from 0 to 70 µM. The formation of Bm252RFP was expressed based on the absorbance values at 600 nm, and Hill's coefficient was calculated as described previously (13).
Stability of P252-Chlide complex.
Stability of the reactants generated by the incubation of P252 and Chlide was monitored. The reactants were lyophilized and redissolved in 50 mM Tris-HCl buffer, pH 8.0, and allowed to stand for 22 h. Every hour, an aliquot of the solution was centrifuged using a 100-kDa filter spin column (YM-100; Microcon, CA), and fluorescent scanning of the filtrates was done with a fluorescence spectrophotometer and also by detecting absorbance values at 600 nm, both as described above.
SDS and native PAGE.
SDS-PAGE was performed as described previously (15). Native PAGE was done according to Kishimoto et al. (20). The proteins were visualized with silver or Coomassie brilliant blue staining. Protein bands having fluorescence were analyzed using an LAS 3000 charged-coupled-device gel analyzer by exciting the gel at 490 nm with a blue epi-illuminator (Fuji Film, Tokyo, Japan), and the emission was observed at 630 nm using a red epi-illuminator.
Protein quantification.
Solubilized or chromatographed BBM proteins were monitored by optical density at 280 nm and quantified by the Bradford method (6). For circular dichroism (CD) analysis, the protein concentration was estimated by the Kjeldahl method (35).
CD spectroscopy.
Far-UV CD experiments were performed with a spectropolarimeter (J-725; Jasco Co. Ltd., Tokyo, Japan) equipped with a 250-W xenon lamp. Spectra were recorded using cells with a 0.1-cm light path at a speed of 50 nm/min over 190 to 260 nm. CD spectra were obtained according to Yang et al. (43) with 20 mM Tris-HCl buffer containing 50 mM NaCl, pH 8.0, and the secondary structure contents were analyzed with the program SSE-338 (Jasco Co., Ltd.). The standard error was calculated from five independent experiments.
Bioassay of antimicrobial activity of Bm252RFP.
S. marcescens 2170, E. coli JM109, B. thuringiensis subsp. sotto TA81, or S. cerevisiae was grown for 12 h in LB broth or YMB medium from a single colony in 24-h precultured agar plates. After growth of bacteria in the LB medium and yeast in YMB medium, each for 12 h, the cell concentration of the cultures was adjusted to a 0.5 McFarland's turbidity standard using a spectrophotometer, as described previously (23). Effectors such as P252, Chlide, and Bm252RFP were dissolved in 50 mM Tris-HCl, pH 8.0, at various concentrations from 1 µM to 22 µM. The culture with adjusted cell number was inoculated with the effectors and incubated for 4 h at 37°C for bacteria and at 30°C for yeast. The aliquots of the cultures treated with effectors were plated in triplicate and incubated overnight at 37°C, and the number of CFU/ml was counted to obtain the 50% effective concentration (showing 50% inhibition in microbial growth [EC50]) calculated as described previously (5).
Bioassay of insecticidal activity.
Insecticidal activity of P252-Chlide was evaluated with a mortality study using 10 individual third-instar larvae of B. mori. P252, Chlide, and P252-Chlide were given to the 10 larvae at 20 µg/g of diet to each larva. Cry1Aa and Cry1Ab were used as the positive controls at 0.6 µg/g of diet and 4 µg/g of diet, respectively.
|
RESULTS |
|---|
|
TopABSTRACTINTRODUCTIONMATERIALS AND METHODSRESULTSDISCUSSIONREFERENCES |
|---|
Purity of Chlide.
Chlide was prepared with fresh spinach from a local market, and finally 10 g of spinach yielded 0.08 mg of Chlide by TLC. This Chlide was checked for its purity with HPLC in a C18 reverse-phase column. A single Chlide peak was detected at 4.8 min using absorbance at 664 nm (Fig. 1A), and this retention time corresponded exactly to that of the Chlide from Sigma Aldrich described previously (41). Chlide was shown to have absorbance and fluorescence emission peaks at 664 nm and 670 nm, respectively, similar to a previous report (3).
In TLC, the purified Chlide migrated with an Rf value of 0.41, and the value was the same as that of commercial Chlide from Sigma Aldrich (Fig. 1B). The Chlide prepared from the spinach was estimated to have 93% purity in comparison to the commercial Chlide (Sigma Aldrich), yielding 0.8 mg of purified Chlide.
Chlide was dissolved in 50 mM Tris-HCl buffer, pH 8.0, containing 100 mM NaCl and used for various experiments. The Chlide in this buffer was stable for at least 20 days at –20°C.
Incubation of P252 with Chlide.
RFPs were reported to be synthesized when midgut protein(s) binds with Chlide. Incubation under aerobic-light conditions was reported to be important for RFP formation (12); therefore, we incubated P252 with Chlide to explore the formation of RFP (Fig. 2).
|
Under these conditions when we added 60 µM Chlide, no further increase in the absorbance value at 600 nm was observed, indicating that the production of the compound showing the absorbance was saturated at around 50 µM Chlide with 1 µM P252.
Effect of temperature on formation of P252-Chlide complex.
The reaction for the formation of the compound showing the absorbance peaks at 600 nm and 664 nm was monitored under different temperatures by keeping other parameters constant, as mentioned above (Table 1), and by monitoring the absorbance values at these fixed wavelengths. The maximum absorbance at 600 nm was observed at 37°C; and when carried out at 40°C, the reaction was acutely reduced, and only half the amount of the complex was formed compared to that formed at 37°C (Table 1), indicating that the stability of the complex is jeopardized at 40°C.
|
|
Native PAGE analysis of the compound synthesized in the incubation of P252 and Chlide.
The reactants obtained in the incubation of P252 with Chlide were subjected to native PAGE to visualize red fluorescence to determine whether the P252-Chlide synthesized also emits red fluorescence as an RFP. The reactants after the incubation were lyophilized, dissolved into a small amount of the Tris-HCl buffer, and applied to a native PAGE gel (Fig. 4). The gel was then excited at 490 nm, and emission was detected at 630 nm (this is the instrument filter wavelength which can also detect fluorescence emission in the red region), as described in Materials and Methods. A clear bright red fluorescence was observed only in the case of the P252-Chlide complex (Fig. 4B). These data evidenced that P252-Chlide certainly emits red fluorescence at the level of an RFP. Thus, the P252-Chlide complex was identified as the B. mori 252-kDa RFP, or Bm252RFP.
|
Optimal condition of various parameters to produce P252-Chlide complex.
Various experimental conditions were studied as above to find the optimal conditions for efficient Bm252RFP in vitro chemical synthesis through intermediate or direct reactions. Optimum Bm252RFP production was obtained when 1 µM P252 was incubated at 37°C for 60 min under aerobic-light conditions with about 50 µM Chlide. Bm252RFP can also be formed from the intermediate complex obtained under anaerobic-dark conditions, as shown in Fig. 3A, by incubating it under the optimum conditions described above.
Stability of Bm252RFP.
Stability of Bm252RFP is an important issue to assign antimicrobial activity (to be discussed below) only to the complex and not to any metabolites of the Chlide released during the assay. So, stability of the purified Bm252RFP was analyzed by centrifuging the sample periodically in a spin column (YM-100) for 22 h, which is the incubation time period required for the antimicrobial activity assay. But neither Chlide nor any metabolites were observed in the filtrates even up to 20 h, which was indicated by the single characteristic fluorescence emission and absorbance peaks at 620 nm and 600 nm, respectively, as mentioned above (data not shown). Bm252RFP was stable at –20°C at least up to 31 days when stored in 50 mM Tris-HCl buffer, pH 8.0, containing 100 mM NaCl. This Bm252RFP dissolved in the above Tris-HCl buffer was used as the source of Bm252RFP in the following experiments.
Substrate saturation curve of Bm252RFP formation.
Formation of Bm252RFP by P252 binding with Chlide was calculated and plotted against various concentrations of Chlide to explore the binding saturation. A sigmoidal curve (Fig. 5) was obtained, and Hill's coefficient was calculated as shown previously (13) to be 1.6, which indicates positive cooperation of the binding reaction (Fig. 5, inset). The dissociation constant of this binding was calculated from the Hill plot as 0.4 µM.
|
-helices. On the other hand, the CD spectrum of Bm252RFP clearly indicated a different pattern from that of P252, and the β-structure substantially decreased to 21.6% ± 3.14%. It also had no -helices. Since Chlide has no secondary structure, the decrease in the β-content should be due to the change in the P252 conformation.
|
|
|
DISCUSSION |
|---|
|
TopABSTRACTINTRODUCTIONMATERIALS AND METHODSRESULTSDISCUSSIONREFERENCES |
|---|
A homology search using the three internal peptides of P252 indicated a very high sequence similarity with the CBP present in the B. mori midgut. This search result led us to explore the ability of P252 to bind with Chlide. As we have characterized sequentially above, we have clearly shown that P252 binds with Chlide and that in this pigment-protein binding reaction, a red fluorescent complex, termed Bm252RFP, was formed. Various characteristics, such as absorbance at about 600 to 605 nm and a fluorescence emission peak at about 620 to 625 nm, of Bm252RFP matched with the previously reported data corresponding to historically reported RFPs (8, 26, 27, 30, 38). These RFPs reported were found in not only the midgut membrane but also the digestive juice and feces of silkworm larvae (2, 10, 29, 32). In addition, very interestingly, Bm252RFP was also shown to have strong antibacterial activity.
Initial in vitro synthesis experiments with BBM proteins suggested that RFP formation occurs through the binding of midgut protein with Chlide (10). Also, the formation of Chlide-midgut protein complex was shown to first form an intermediate complex having a 650-nm absorbance peak and then was shown to eventually form RFP with an absorbance peak at about 601.5 nm under aerobic-light conditions (38). Analogous with the bile pigment metabolism (34), Chlide is suggested to be converted to -hydroxy-Mg/CBP complex in the presence of oxygen. The porphyrin ring is then cleaved to form a pigment-protein complex (RFP) containing three conjugated pyrrole groups, and the prosthetic group is accepted to be closely related to biladiene-like compounds as described in Kusuda et al. (24).
Our P252-Chlide reaction mixture also showed an absorbance peak at 640 nm under anaerobic-dark conditions (Fig. 3A). This is suggested to be an intermediate with a partially cloven porphyrin ring of Chlide, as described previously (24, 38). However, under aerobic-light conditions, such a cleavage might have been directly completed, and a clear 600-nm peak was observed as previously reported (38); and in our optimum reaction, 10 µg of P252 protein was required to form RFP in 60 min. RFP in vitro chemical synthesis experiments were done previously (10, 38) with midgut protein fractions whose characteristics are unknown, and in these studies about 4 mg of midgut protein fractions was employed, which might be due to the low purity of the actual protein.
Recently Mauchamp et al. cloned the cDNA of CBP, and the molecular size was deduced to be 302 kDa. The structure was also deduced to have 15 lipocalin repeats and was termed polycalin, a novel member of the lipocalin family (26). Since P252 internal peptides were homologous to these nucleotide sequences and since P252 was also evidenced as CBP, it was suggested to be similar, if not the same, as lipocalin CBP even though three internal small peptides had no lipocalin repeat. Lipocalin is a cytosolic fatty acid binding protein having a characteristic β-barrel structure. Interestingly, the secondary structure of P252 was also rich in β-structures but not in -structures (Fig. 6). Based on these data, it is highly possible that P252, whose native molecular mass is about 980 kDa, also has a β-barrel structure. Although evidence of a β-barrel in P252 and the binding site of Chlide has not yet been ascertained, it is fascinating to envision that Chlide binds with this barrel. A Hill's coefficient of 1.6 indicated a positive cooperative reaction such that binding of one molecule of Chlide with P252 increases the affinity of other Chlide molecules as an allosteric enzyme.
If the binding of Chlide with P252 takes place via the β-barrel structure de facto, the conformation of the structure must drastically change upon binding with Chlide, since secondary structure analysis by CD suggested that contents of the β-structure in native P252 was reduced by 50% on the formation of Bm252RFP (Fig. 6). We also suggest that the binding between P252 and Chlide was strong due to a low dissociation constant, 0.4 µM. Furthermore, the binding was observed to be very stable in storage at least up to 31 days at –20°C. Bm252RFP was allowed to stand for various time intervals, and the supernatants were filtered through a 100,000-molecular-weight-cutoff membrane, but neither Chlide nor Chlide derivatives were observed even up to 22 h. Bm252RFP showed almost the same intensity in red fluorescence and also held its typical spectral characteristics during the incubation time period necessary to carry out the assay of antimicrobial activity. Bm252RFP was stable at pH 9.5 for a month (data not shown), which is the approximate pH of the lepidopteran midgut juice; this suggests that Bm252RFP may be stable in the B. mori midgut juice until almost the last stadium larvae even at room temperature. If this is the case, antibacterial activity of Bm252RFP must be important for the defense of B. mori against harmful microbes.
Bm252RFP had antibacterial activity against E. coli, S. marcescens, and B. thuringiensis with EC50s of 2.4, 2.9, and 5.9 µM, respectively. These values were comparable to that of kanamycin, estimated as 1.16 µM in our experiments. It also had comparatively less activity against S. cerevisiae, with an EC50 of 21.6 µM. P252 did not show any inhibitory effect against any of the above microbes. Therefore, only Bm252RFP can work as an antibacterial factor. An excess amount of Chlide showed only a weak inhibitory activity, which might be due to the photo-oxidation of a small amount of Chlide during our experiment (Fig. 7). If this is true, the reaction of Chlide to form a chromophore that can have antimicrobial activity may not easily occur spontaneously, and catalysts such as P252 (CBP) might be necessary. This activity may be due to the formation of a stable radical generated by the binding of Chlide; however, at this moment we have no evidence to advance the discussion further.
We checked the insecticidal activity of Bm252RFP using the third instar of B. mori larvae, but no activity was observed even at 20 µg/g of diet. Neither Chlide nor P252 had any insecticidal effect on the larvae at the same concentration. Thus, Bm252RFP has adverse effects only on the microbes and not on the insects. So, as we discussed above, it can possibly play an immune role against pathogenic microbes in the insect larvae.
It will be interesting to explore the role of Bm252RFP-Cry1A in the insecticidal mechanism. This study will help us to understand the physiological function(s) of Bm252RFP.
|
ACKNOWLEDGMENTS |
|---|
|
FOOTNOTES |
|---|
Published ahead of print on 11 January 2008.
|
REFERENCES |
|---|
|
TopABSTRACTINTRODUCTIONMATERIALS AND METHODSRESULTSDISCUSSIONREFERENCES |
|---|
-endotoxin of Bacillus thuringiensis. Comp. Biochem. Physiol. B 120:197-204.[CrossRef][Medline]-mannosidase digesting the high mannose glycopeptide of glutelin. Physiol. Plant 112:15-24.[CrossRef][Medline]-endotoxin in the brush border membrane of the lepidopteran Manduca sexta is aminopeptidase N. Mol. Microbiol. 11:429-436.[Medline]-endotoxins with different insect specificity. Biochim. Biophys. Acta 924:509-518.-endotoxin of Bacillus thuringiensis. Insect Biochem. Mol. Biol. 25:1143-1151.[CrossRef][Medline]
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| J. Bacteriol. | Microbiol. Mol. Biol. Rev. | Eukaryot. Cell | All ASM Journals |
|---|
