Applied and Environmental Microbiology, February 2009, p. 887-896, Vol. 75, No. 4
0099-2240/09/$08.00+0 doi:10.1128/AEM.01371-08
Copyright © 2009, American Society for Microbiology. All Rights Reserved.
,
Hubert Bartosz-Bechowski,2 and
Katarzyna Kuczek1
Department of Microbiology, Ludwik Hirszfeld Institute of Immunology and Experimental Therapy, Polish Academy of Sciences, ul. Weigla 12, 53-114 Wroclaw, Poland,1 Faculty of Chemistry, University of Wroclaw, ul. F. Joliot-Curie 14, 50-383 Wroclaw, Poland2
Received 19 June 2008/ Accepted 2 December 2008
|
|
|---|
/β hydrolase with Ser90 and His224 in its active site. |
|
|---|
In bacteria, genes encoding main PKS or NRPS subunits are clustered with genes encoding enzymes that modify the polyketide or peptide chain, as well as regulatory and resistance genes. Many modular PKS and NRPS clusters also include genes for type II thioesterases (TE IIs). These discrete, 25- to 29-kDa proteins were first identified in some mammalian fatty acid synthase (FAS) complexes, where they are alternative chain-terminating enzymes with affinities for medium-chain-length fatty acids (38). In PKS and NRPS systems they appear to have an "editing" role, removing nonreactive acyl residues blocking the multienzyme (16, 36, 50), removing amino acids that cannot be elongated (48), and/or controlling starter unit selection (20). However, recent reports on polyether ionophore antibiotic biosynthesis have shown that TE IIs are responsible for the release of this class of polyketides by hydrolysis (15, 28, 29).
Biosynthesis of polyketides involves repeated cycles of condensation and reduction of short carboxylic acids in a process similar to fatty acid biosynthesis (39). The first step of each biosynthetic cycle is decarboxylative condensation of a starter unit (or the growing chain from the previous module) with a malonyl-coenzyme A (malonyl-CoA)-derived extender unit. This results in chain elongation by a dicarbon unit and generates a β-carbonyl group, which can be further reduced depending on the presence of reducing domains in a given module. The chain is then transferred to the subsequent module, which performs the next elongation cycle. Sometimes, extender units attached to the ACP are decarboxylated without condensation. Products of such aberrant decarboxylation (acetyl, propionyl, and butyryl residues) remain covalently attached to the ACP and block the "assembly line." They must be removed by a TE II to restore the PKS activity (16).
Since the nonribosomal peptide biosynthesis process does not involve decarboxylation, a different mechanism that gives rise to nonreactive acyl residues has been proposed (36). After synthesis of the NRPS protein, each of the PCP domains is converted into its holo form by attachment of 4'PP in a process called priming catalyzed by a 4'PP transferase. 4'PP transferases use CoA as a source of 4'PP, but they have also been shown to accept different acyl-CoA derivatives. Transfer of acyl-4'PP to the PCP domain is called mispriming and results in inactive NRPS. The role of TE II has been proposed to be hydrolysis of these acyl residues, and this step has been called deblocking after mispriming (36). The ACP domains of modular PKSs also require priming with 4'PP; therefore, it is very likely that deblocking after mispriming is also the role of TE II in polyketide synthesis.
Biochemical studies have shown that TE IIs are able to hydrolyze acyl residues, which may result from aberrant decarboxylation of extender units or from mispriming of ACP/PCP domains with acyl-4'PP (16, 23, 36, 48, 50). These findings are consistent with results of disruption experiments, in which a lack of TE II resulted in drastically reduced levels of production of polyketide (6, 10, 50) or peptide (11, 35, 49) compounds.
In contrast, deletion of the TE II gene (pikAV) from the picromycin/methymycin synthase gene cluster of Streptomyces venezuelae was found to have no effect on the level of polyketide production (8). This finding is in contrast to the findings of Xue et al. (47), who found that less than 5% of the glycosylated products and no intermediates were accumulated by a mutant with a disrupted pikAV gene. Therefore, the role of PikAV thioesterase remains unclear. Overexpression of the pikAV genes in S. venezuelae resulted in 50 to 70% decreases in polyketide production, which can be attributed to hydrolysis of correct extender units (23). On the other hand, polyketide production by picromycin/methymycin synthase expressed in Streptomyces lividans was enhanced up to sevenfold by coexpression of PikAV thioesterase (42).
Disruption of the TE II gene associated with 6-deoxyerythronolide B synthase (DEBS) of Saccharopolyspora erythraea resulted in a notable increase in shunt products formed by utilization of acetate instead of propionate as a starter unit, while the combined level of all polyketides produced was reduced by less than 20% (20). The DEBS TE II exhibited a strong in vitro preference for the acetyl group bound to the ACP from the loading module of DEBS. Therefore, it was proposed that removal of acetate from the ACP of the loading module is the main function of this TE II (20).
This paper deals with the TE II ScoT associated with the type I modular PKS Cpk from Streptomyces coelicolor A3(2) (32). ScoT was shown previously to restore polyketide production in a mutant of Streptomyces fradiae lacking the native TE II (encoded by tylO in the tylosin synthase cluster) (25). It was not possible to study the role of this enzyme in the natural context, since the polyketide produced by the Cpk synthase has not been identified yet. Here we describe kinetic measurements of the activity of the thioesterase ScoT with synthetic substrates mimicking acyl chains blocking the PKS. We also describe the activity of ScoT active-site mutants.
|
|
|---|
p-Nitrophenyl (p-NP) acetate and p-NP propionate were obtained from Sigma, and p-NP butyrate was obtained from Fluka. Other chemical reagents were obtained from Sigma and Roth. Restriction enzymes and polymerases, as well as DNA and protein mass markers, were obtained from MBI Fermentas.
Escherichia coli strains were cultured in LB medium (34).
Construction of the TE II expression plasmids.
DNA manipulations were performed by using standard procedures (34). The TE II gene scoT of S. coelicolor A3(2) was amplified by PCR using plasmid pMK15 as the template; pMK15 is a pBluescriptSK(+) construct containing two BamHI fragments from the T3 terminus of cosmid 1G7 (accession number AF109727). Primers TE-P-Nde (5' TTT TTT TTT CAT ATG GGA AGT GAC TGG TT 3') and TE-K-Hind (5' TTT TTT TAA GCT TGT CGT ACG TAC ACG GA 3') were designed to introduce restriction sites (underlined). The PCR product was cloned in the pGEM-T Easy vector (Promega), digested with NdeI and HindIII, and cloned into the corresponding sites of pET-28a(+) to obtain plasmid pOS22.
Mutated versions of the ScoT thioesterase were constructed by overlap extension (34). Upstream and downstream portions of the scoT gene were amplified using Pfu polymerase, which generated blunt ends with appropriate primer pairs that introduced mutations (Table 1). The upstream part of the scoT gene was amplified with TE-P-Nde and a mutagenic primer whose designation ends with "R," and the downstream part of gene was amplified with TE-K-Hind and a mutagenic primer whose designation ends with "F." In the subsequent step upstream and downstream parts of the scoT gene with mutations (approximately 100 ng each) were mixed, and the whole mutated gene was amplified with primers TE-P-Nde and TE-K-Hind to allow cloning in pET-28a(+) digested with NdeI and HindIII. For cloning in pGEX-6P-1, the NdeI and HindIII adhesive ends were filled with the Klenow enzyme, and the fragment was ligated with an SmaI-digested vector.
|
View this table: [in a new window] |
TABLE 1. Oligonucleotides used for site-directed mutagenesis
|
was used for the cloning steps. Expression plasmids were used to transform E. coli strains BL21(DE3)/pLysS and BL21Star(DE3).
Purification of the recombinant proteins.
Wild-type ScoT protein and the ScoT_H224Y mutant were isolated from E. coli BL21(DE3)/pLysS cells. The ScoT_S90A and ScoT_S90C proteins were isolated from E. coli strain BL21Star(DE3). The ScoT_H210Y protein was isolated from E. coli BL21Star(DE3) cells additionally transformed with plasmid pGroESL encoding chaperones (14).
Cultures (200 ml) of E. coli cells transformed with expression plasmids were grown in 1-liter flasks in LB medium with appropriate antibiotics [30 µg/ml kanamycin for pET28a(+), 100 µg/ml ampicillin for pGEX-6P-1, and 34 µg/ml chloramphenicol for pLysS and pGroESL] at 37°C until the required optical density at 600 nm (OD600) was reached (0.6 for ScoT_H210Y and 1.0 for the remaining proteins). Then the cultures were cooled for 20 min, and protein expression was induced with isopropyl-thio-β-D-galactoside (IPTG) (0.1 mM for ScoT_H224Y and 0.01 mM for the remaining proteins). After overnight incubation on a shaker (at 22°C for ScoT_H210Y and at 9°C for the remaining proteins), the cells were harvested by centrifugation (5,000 x g, 10 min, 4°C) and frozen at –70°C.
Recombinant proteins with an N-terminal His6 tag were isolated by nickel affinity chromatography. Cells were resuspended in lysis buffer (50 mM NaH2PO4, 300 mM NaCl; pH 8.0) (4 ml of lysis buffer/g [wet weight] of cells) and disrupted by sonication on ice (two 5-min treatments; cycle 0.5; 60% amplitude) using a UP200S ultrasonic disintegrator (Dr. Hielscher GmbH). The cell lysate was clarified by centrifugation (10,000 x g, 30 min, 4°C). Two milliliters of HIS-Select nickel affinity gel (Sigma) previously equilibrated with lysis buffer was added to 50 to 100 ml of the lysate and allowed to bind for 1 h with gentle shaking at 4°C. The resin was then collected by centrifugation (5,000 x g, 5 min, 4°C) and packed into a column. The column was washed with lysis buffer containing 10 mM imidazole, and the recombinant protein was eluted with the same buffer containing 50 mM imidazole. Fractions containing the recombinant protein were pooled and desalted using a PD-10 column (GE Healthcare). The buffer was changed to 50 mM Tris-HCl (pH 7.5). Next, 1 ml of Q Sepharose (GE Healthcare) equilibrated with the same buffer was added, allowed to bind for 30 min, packed into a column, and washed. The protein of interest was eluted with 100 mM NaCl in 50 mM Tris-HCl (pH 7.5).
ScoT_H224Y expressed as a fusion protein with glutathione S-transferase was purified by affinity chromatography. Cells collected from a 2-liter culture were resuspended in 100 ml of ATP-containing buffer (50 mM Tris-HCl [pH 7.5], 10 mM MgSO4, 2 mM ATP) and disrupted by sonication as described above. One milliliter of glutathione-Sepharose 4B (GE Healthcare) equilibrated with the same buffer was added to the cleared lysate and allowed to bind for 30 min with gentle shaking at 4°C. The resin was then collected by centrifugation (5,000 x g, 5 min, 4°C), packed into a column, washed with ATP buffer, and equilibrated with PreS buffer (50 mM Tris-HCl [pH 7.0], 150 mM NaCl, 1 mM EDTA, 1 mM dithiothreitol). The column-bound fusion protein was digested overnight at 4°C with 80 U of PreScission protease (GE Healthcare). Purified ScoT_H224Y protein was eluted with PreS buffer.
Samples from different purification steps were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Gels were visualized by staining with Coomassie brilliant blue. Protein concentrations were determined by the method of Bradford (3). Fractions containing purified protein were pooled, glycerol was added to a concentration of 10% (vol/vol), and aliquots were shock frozen in liquid nitrogen and stored at –70°C.
Kinetic assays.
The conditions used for the enzymatic activity assays were the conditions described by Heathcote et al. (16). Hydrolysis rates were determined at 30°C using 1 ml (total volume) of assay buffer containing 200 mM potassium phosphate (pH 7.5), 2.5 mM Tris-HCl (pH 7.5), and 50 µM EDTA. Variable amounts of substrates were added from stock solutions in dimethyl sulfoxide (DMSO), and the DMSO concentration was adjusted to 3% (vol/vol). The ScoT concentration used for hydrolysis of p-NP butyrate, NAC butyrate, and NAC acetate was 225 nM, and the ScoT concentration used for hydrolysis of the remaining substrates was 75 nM. The concentrations of mutant proteins ScoT_S90C, ScoT_H210Y, and ScoT_H224Y were 800, 75, and 150 nM, respectively. All samples were examined in triplicate, and the results were corrected for background hydrolysis in the absence of the enzyme. The rate of hydrolysis was proportional to the enzyme concentration; therefore, so that the results could be compared on the same plot, all data were recalculated so that they corresponded to the data obtained with 75 nM enzyme.
Hydrolysis of p-NP esters was visible due to formation of the yellow p-nitrophenolate anion and was monitored by spectroscopy (
max, 400 nm;
= 8,570 M–1 cm–1). Stock solutions of p-NP esters consisted of 100 mM ester in DMSO.
Hydrolysis of NAC thioesters was monitored by including 0.2 mM 5,5'-dithio-2-nitrobenzoic acid (Ellman's reagent) in the reaction mixture. The yellow product of the reaction of 5,5'-dithio-2-nitrobenzoic acid with free thiol groups (5-thio-2-nitrobenzoic acid) was monitored by using spectroscopy (
max, 412 nm;
= 13,600 M–1 cm–1). Stock solutions of NAC thioesters consisted of 2 M thioester in DMSO.
ESI-MS analysis.
For electrospray ionization-mass spectrometry (ESI-MS) experiments a micrOTOF-Q mass spectrometer (Bruker) was used. The buffer for the ScoT and ScoT_S90A proteins was changed to 20 mM NH4HCO3 when a PD-10 column (GE Healthacare) was used. Ten microliters of a protein solution (8.5 µM) was diluted with 300 µl of a solution containing acetonitrile, water, and formic acid (500:500:1, vol/vol/vol). In order to determine the presence of an acylated thioesterase, 1 µl of a substrate solution (10 mM p-NP ester in acetonitrile) was added to 10 µl of a protein sample, incubated for 20 s at room temperature, and diluted with 300 µl of acetonitrile-water-formic acid. Samples were introduced into the ion source at a flow rate of 4 µl min–1. Spectra were scanned from m/z 200 to m/z 2200 and were analyzed using the Bruker Daltonics DataAnalysis 3.4 software. The mass scale was calibrated with Tune Mix (Agilent).
|
|
|---|
Substrate specificity of thioesterase ScoT.
Aberrant decarboxylation of polyketide extender units, such as malonate, methylmalonate, and ethylmalonate, gives rise to acetyl, propionyl, and butyryl residues that are attached to ACP domains of PKS proteins and block the activity of the entire multienzyme. The hydrolytic activity of the TE II ScoT was investigated using substrates representing these acyl chains. Two groups of substrates were used: p-NP esters and NAC thioesters. The hydrolysis reaction has two steps, acylation and deacylation. NAC thioesters are good structural analogues of natural thioesterase substrates (acyl groups attached to 4'-PP of ACP). They reflect the acylation step of the hydrolysis reaction well. The more-reactive p-NP esters are useful for studying the deacylation step and have been widely used in studies of other thioesterases (16, 44, 46). The progress of hydrolysis was monitored by spectroscopy. The kinetic constants determined are shown in Table 2.
|
View this table: [in a new window] |
TABLE 2. Kinetic constants for synthetic substrate hydrolysis by recombinant TE II ScoT
|
![]() View larger version (14K): [in a new window] |
FIG. 1. Plots of rate (V) versus substrate concentration for the hydrolysis of p-NP esters (A) and NAC thioesters (B) by thioesterase ScoT. The data are the means ± standard deviations.
|
Active site investigation.
On the basis of the results of a sequence comparison and predicted secondary structure homology search, the ScoT protein was assigned to the family of thioesterases (PF00975) belonging to the clan of
/β hydrolases (CL0028) (Pfam database). The proteins belonging to the
/β hydrolase group (lipases, esterases, dehalogenases, epoxide hydrolases, and others) have conserved structural features despite low or even no sequence homology (17, 19, 31). The canonical
/β hydrolase fold has been described as an eight-strand, mostly parallel β sheet surrounded on both sides by
helices (Fig. 2A). The active sites of
/β hydrolases consist of the catalytic triad Nu-Ac-His (where Nu is a nucleophile [usually Ser] and Ac is an acid [usually Asp]). The nucleophile is located in a tight turn between strand β5 and helix
C called the "nucleophilic elbow" in the consensus sequence Sm-X-Nu-X-Sm (where Sm is a small residue [usually Gly] and X is any residue). Histidine is located on a loop after strand β8. The location of the acidic residue is the most variable; in the canonical structure this residue is after strand β7.
![]() View larger version (37K): [in a new window] |
FIG. 2. Topology of /β hydrolases. Cylinders, helices; arrows, β strands. Shading indicates the minimal set of and β structures. (A) Canonical /β hydrolase fold. Catalytic triad amino acids are indicated by dots. (B) Predicted topology of secondary structures of ScoT thioesterase representing model 1. (C) Predicted topology of secondary structures of ScoT tioesterase representing model 2. In panels B and C amino acids selected for site-directed mutagenesis are indicated by dots.
|
![]() View larger version (48K): [in a new window] |
FIG. 3. Alignment of the ScoT amino acid sequence with the sequences of TE IIs associated with bacterial PKSs, NRPSs, and rat FAS. Amino acids selected for mutagenesis are indicated by asterisks, and the corresponding substitutions are shown above the sequences. RifR (PKS), TE II associated with rifamycin synthase of Amycolatopsis mediterranei (accession number AAG52991); TEII_roch (PKS), predicted TE II of Streptomyces rochei (accession number NP_851508); TEII_aver (PKS), predicted TE II of Streptomyces avermitilis (accession number NP_821582); Plm8 (PKS), TE II associated with phoslactomycin B synthase of Streptomyces sp. strain HK803 (accession number AAQ84143); MonAX (PKS), TE II associated with monensin synthase of Streptomyces cinnamonensis (accession number AAO65810); ORF5_tyl (PKS), TE II associated with tylosin synthase of S. fradiae (accession number AAA21345); PikAV (PKS), TE II associated with pikromycin synthase of S. venezuelae (accession number AAC69333); ORF3_ery (PKS), TE II associated with DEBS of Saccharopolyspora erythraea (accession number CAA42928); GrsT (NRPS), TE II associated with gramicidin S-synthetase of Brevibacillus brevis (accession number AAA58717); SrfA4 (NRPS), TE II associated with surfactin synthetase of Bacillus subtilis (accession number CAA49819); rat (FAS), TE II associated with rat FAS (accession number P08635).
|
helices and β strands of the
/β hydrolase fold (β3 to β7 and
A to
D). The nucleophilic residue of ScoT is probably Ser90 in the conservative sequence G-X-S-X-G typical of thioesterases and acyltransferases; in both models this residue is located on the turn between strand β5 and helix
C. The two models indicate that different histidine residues are located on a loop after strand β8, which could be involved in the catalytic triad. These residues are His224 (model 1) and His210 (model 2). After the predicted strand β7 there are two acidic residues, Asp194 and Asp196. One of these residues could potentially be the acidic component of the catalytic triad. These five amino acids were selected for site-directed mutagenesis (Fig. 3). Eight mutants with single substitutions (S90A, S90C, H210A, H210Y, H224A, H224Y, D194N, and D196N) and one double mutant (DD194/196NN) were constructed by overlap extension. The double mutant was designed to exclude potential functional replacement of one Asp residue by the other Asp residue. ScoT_S90A, ScoT_S90C, and ScoT_H210Y were isolated using the same procedure that was used for the wild-type ScoT protein. ScoT_ H224Y was expressed as a fusion protein with glutathione S-transferase. The remaining mutant proteins were found in the insoluble fraction of an E. coli lysate. The mutations probably had a negative effect on the protein folding process.
Since propionate derivatives were the best substrates for the wild-type ScoT protein, p-NP propionate and NAC propionate were used to test the enzymatic activity of the mutants. Plots of the initial reaction rates versus substrate concentrations are shown in Fig. 4. Calculated catalytic constants are shown in Table 3. Replacement of serine 90 by alanine completely abolished the hydrolytic activity of ScoT. The mutant with cysteine instead of serine exhibited some residual activity (the kcat/Km value was approximately 10% of the wild-type kcat/Km value). This led to the conclusion that Ser90 is indeed the nucleophilic residue of the catalytic triad. The results obtained indicate that the second element of the catalytic triad is histidine 224 and not histidine 210. The activity of the protein with the H210Y mutation was close to that of the wild-type ScoT protein, and the activity of the ScoT_H224Y mutant was much lower (the kcat/Km value was 40% of the kcat/Km value for p-NP propionate and 55% of the kcat/Km value for NAC propionate).
![]() View larger version (17K): [in a new window] |
FIG. 4. Plots of rate (V) versus substrate concentration for the hydrolysis of p-NP propionate (A) and NAC propionate (B) by ScoT thioesterase mutants. The data are the means ± standard deviations.
|
|
View this table: [in a new window] |
TABLE 3. Summary of ScoT mutant activities
|
The initial analysis of the mass spectrum of ScoT protein without any substrates added revealed the presence of two major compounds, compounds a and b, whose molecular masses differed by 178 Da (Fig. 5A). The molecular mass of the main compound (compound a) was 30,718.48 ± 0.44 Da (molecule [M+H]+), which is in agreement with the expected molecular mass of recombinant ScoT protein lacking the N-terminal methionine (30,717.98 Da). The second peak (compound b) represented the same protein with a gluconic acid residue attached to its N terminus. Spontaneous
-N-gluconoylation is a common posttranslational modification of His-tagged proteins expressed in E. coli and results in an increase in the molecular mass of 178 Da (12). A small amount of acetylated ScoT was also present in the protein sample (compound e, with molecular mass 42 Da greater than the molecular mass of compound a).
![]() View larger version (26K): [in a new window] |
FIG. 5. Detection of acyl-enzyme intermediate of the hydrolysis reaction catalyzed by thioesterase ScoT. (A) ScoT protein. (B) ScoT protein incubated with p-NP butyrate. (C) ScoT_S90A protein. (D) ScoT_S90A protein incubated with p-NP butyrate. Both ScoT and ScoT_S90A lack the N-terminal methionine. Peaks labeled with letters represent the following compounds: peak a, ScoT; peak b, gluconoylated ScoT; peak c, butyrylated ScoT; peak d, butyrylated and gluconoylated ScoT; peak e, acetylated ScoT; peak a', ScoT_S90A; peak b', gluconoylated ScoT_S90A.
|
Mutated thioesterase with serine 90 replaced by alanine was also subjected to ESI-MS analysis. As in the experiment with the wild-type protein, two forms of the ScoT_S90A protein were found (Fig. 5C): compound a' (lacking the N-terminal methionine) and compound b' (demethionylated and gluconoylated). When the ScoT_S90A protein was incubated with p-NP butyrate, formation of the acyl-enzyme was not observed (Fig. 5D). This experiment confirmed that the hydrolysis reaction proceeds through acylation of Ser90, which is the active site of thioesterase ScoT.
|
|
|---|
Michaelis constants and catalytic constants could be determined only for NAC thioesters. The Km for propionate is slightly lower than those for acetate and butyrate, which suggests that ScoT binds this substrate with higher affinity. However, greater differences in the reaction rates were associated with other steps, as indicated by the differences between kcat values (Table 2).
The kinetic constants determined can be directly compared to the parameters for TylO thioesterase associated with the tylosin synthase of S. fradiae, which was tested with the same substrates (16). ScoT was found to be more active than TylO. For both groups of substrates (p-NP and NAC derivatives) the kcat/Km values of ScoT for acetate and propionate were an order of magnitude greater than the corresponding values for TylO (Fig. 6). By comparing the parameters determined for NAC propionate hydrolysis by ScoT (kcat = 450 min–1 and Km = 34 mM) and by TylO (kcat = 29.2 min–1 and Km = 37.9 mM), we concluded that the differences are associated mostly with the deacylation step during hydrolysis (there are significant differences between the kcat values). As suggested by Kim et al. (23), high Km values (>100 µM) indicate that TE II operates in vivo under nonsaturating conditions and is mostly dissociated from the PKS, which enables it to scan all modules in search of stalled residues.
![]() View larger version (17K): [in a new window] |
FIG. 6. Comparison of specificity constants (kcat/Km) of TE IIs ScoT (S. coelicolor), TylO (S. fradiae), and PikAV (S. venezuelae) for different acyl residues attached to NAC (acyl-NAC) or ACP (acyl-ACP). The kcat/Km (in M–1 s–1) values are shown below the graphs. Data for TylO and PikAV were obtained from references 16 and 23, respectively.
|
Acyl residues which are starter units for polyketide biosynthesis are also possible substrates for TE IIs. The loading module of the Cpk synthase includes a KS domain with glutamine in the active site, which probably decarboxylates a malonyl residue incorporated by the AT domain, resulting in an acetyl starter unit (1). The results obtained caused us to speculate that ScoT may have a role in control of the starter unit by preventing accidental propionate incorporation. To prove this hypothesis, it is necessary to solve the chemical structure of the polyketide produced by the Cpk synthase and to identify the potential shunt product arising from the propionate starter.
High activity of ScoT for propionate can explain the results of our previous experiments. When the scoT gene from S. coelicolor A3(2) was used to complement a tylO disruption mutant of S. fradiae, polyketide production was restored to a level that was up to 50% of the level of the wild-type strain (25), while complementation with the native thioesterase gene (tylO) restored polyketide production to a level that was nearly 100% of the level of the wild-type strain (6). The starter unit for tylosin is propionate. One of the reasons that the level obtained with the strain complemented with the scoT gene was lower may be that there was excessive removal of the propionate starter unit from tylosin synthase. Genes used for complementation were expressed from a strong, constitutive promoter, ermE*p. Perhaps decreasing the expression of ScoT thioesterase would result in a higher level of polyketide production.
Chromosomes of Streptomyces and some other bacteria often contain several PKS and NRPS gene clusters. The mechanisms that prevent unwanted results of interactions between synthases and TE IIs associated with different clusters may include "fine-tuning" of kinetic parameters of the enzymes, substrate specificity, specificity for different ACP (PCP) domains, and temporal and spatial regulation of expression.
The balance resulting from evolution is disturbed by "man-made" modifications of megasynthases (PKS and NRPS), construction of hybrid enzymes, and heterologous expression of the enzymes. Inclusion of a proper editing enzyme in the system is one of the important aspects of such experiments. It is also possible that there are interactions between the introduced synthase and native TE IIs of the host organism. Brown et al. (4) observed that the main product of the first subunit of DEBS expressed in S. coelicolor was the compound resulting from incorporation of acetate instead of propionate. All three DEBS subunits expressed in S. coelicolor produced 6-deoxyerythronolide B with significant addition of 15-nor-6-deoxyerythronolide B (from the acetate starter), even when the TE II associated with DEBS was included (20). It seems probable that high activity of ScoT in the host cells could contribute to this effect by removal of propionate from the loading module of DEBS.
Active site of thioesterase ScoT.
On the basis of the results of a theoretical sequence analysis, we suggest that the ScoT protein belongs to the
/β hydrolase group. Recently, the three-dimensional structure of the TE II involved in the biosynthesis of nonribosomal peptide surfactin of Bacillus subtilis was resolved based on nuclear magnetic resonance titration experiments (24). Surfactin TE II was found to have a typical
/β hydrolase fold. Several crystal structures that have been resolved show that TE I domains of PKS (43) and NRPS (5) also have the
/β hydrolase fold. However, there are important structural differences when TE Is and TE IIs are compared, which explain their different roles. Thioesterase domains form deep substrate channels which accommodate the whole polyketide or peptide products and facilitate their cyclization, while the open shallow active-site cavity of TE II can accommodate only small acyl substrates.
Amino acids which may constitute the catalytic triad of the thioesterase ScoT (Ser-His-Asp) were proposed and changed by site-directed mutagenesis. Our results show that Ser90 is the active site of the enzyme. Replacement of this amino acid with alanine resulted in complete inactivation of the enzyme. The same effect was observed when serine was replaced with alanine in TE IIs (associated with rat FAS [41], surfactin NRPS [27], and nanchangmycin PKS [29]), thioesterase domains associated with the pikromycin PKS (30) and chicken FAS (33), and many other
/β hydrolases.
Replacement of Ser90 with cysteine resulted in a protein with low activity compared to the wild-type enzyme (the kcat/Km value was not more than 10% of the kcat/Km value of the wild-type enzyme). Different results for such a mutation were obtained previously. For example, the S101C mutation in the thioesterase domain of FAS resulted in only a 50% decrease in activity (33). Similarly, rat TE II with the S101C mutation and TE II associated with the surfactin synthetase with the S86C mutation exhibited relatively high activities (27, 41). On the other hand, the activities of many
/β hydrolases decreased by several orders of magnitude when serine was replaced with cysteine (18, 21, 26). The sulfhydryl group is a stronger nucleophile than the hydroxyl group; therefore, often the observed decrease in activity associated with a Ser-to-Cys substitution is associated with deacylation becoming the rate-limiting step (26). The atomic radius of sulfur is larger than that of oxygen. This probably leads to changes in the geometry of the active site and in some cases disables the charge relay system.
The role of Ser90 as the active site was further confirmed by the ESI-MS experiment. Acyl-enzyme formation was observed when p-NP substrates were added to wild-type ScoT protein and not when the mutated protein ScoT_S90A was used.
Two different histidine residues (residues 210 and 224) were identified by two structural models of the ScoT protein as possible elements of the catalytic triad, and each of them was mutated. Initially, they were replaced with alanine, but it was impossible to isolate the mutated proteins from the soluble fraction of E. coli cell lysate. In the second round of the experiment, the histidine residues were replaced with tyrosine. Unexpectedly, the enzymatic activities of both the H210Y and H224Y mutants were fairly high (the kcat values determined for p-NP propionate were 77 and 33% of kcat of wild-type ScoT, respectively). The fact that the effect of the His-to-Tyr substitution at position 224 was more pronounced than the effect of the substitution at position 210 indicates that His224 is part of the catalytic triad. Previously described mutations of histidines in catalytic triads resulted in inactivation or large decreases in activity even if the histidines were replaced with another basic amino acid or tyrosine (2, 9, 27, 29, 45). A typical pKa of the Tyr side chain is 10.0 (40). Theoretically, this residue should remain uncharged at pH 7.5. Perhaps local conditions in the active site of ScoT lead to a decrease in the pKa and allow ionization of tyrosine. The resultant negative charge might function as a proton acceptor and in this way replace histidine.
The third element of the catalytic triad remains unknown, since we failed to isolate Asp194 and Asp196 mutants under native conditions from the soluble fraction of E. coli cell lysate.
Thioesterase ScoT from S. coelicolor A3(2) as characterized here is unique among the TE IIs (associated with macrolide-producing PKSs) tested so far due to its exceptionally high activity for propionate. This feature could be exploited if propionate residues posed a problem and should also be kept in mind when S. coelicolor is used as a host for hybrid PKS expression. We propose that thioesterase ScoT has an editing function similar to that of TylO and also prevents inclusion of the propionate starter unit by the Cpk PKS. We also concluded that this enzyme is an
/β hydrolase with Ser90 and His224 in the active site.
This work was supported by the Ministry of Scientific Research and Information (grant 3P04B 004 29).
Published ahead of print on 12 December 2008. ![]()
Supplemental material for this article may be found at http://aem.asm.org/. ![]()
Present address: MEDianus sp. z o.o., ul. Cystersow 13/2, 31-553 Krakow, Poland. ![]()
|
|
|---|
β-unsaturated N-acetylcysteamine thioesters. BioMed. Chem. Lett. 5:1587-1590.[CrossRef]
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»