Previous Article | Next Article ![]()
Applied and Environmental Microbiology, April 2009, p. 1838-1844, Vol. 75, No. 7
0099-2240/09/$08.00+0 doi:10.1128/AEM.02285-08
Copyright © 2009, American Society for Microbiology. All Rights Reserved.
,
State Key Lab of Microbial Technology, Marine Biotechnology Research Center, Shandong University, Jinan 250100, People's Republic of China
Received 6 October 2008/ Accepted 19 January 2009
|
|
|---|
40%) to other metalloproteases, indicating that it is a novel metalloprotease belonging to subfamily M12A. Myroilysin had broad specificity and much higher elastinolytic activity than the bacterial elastinase pseudolysin. To our knowledge, it is the first reported elastase in the M12 family. Although it displayed very low activity with collagen, myroilysin had strong collagen-swelling ability and played a synergistic role with collagenase in collagen hydrolysis. It can be speculated that myroilysin synergistically interacts with other enzymes in its in situ biotic assemblage and that it may play an important role in the degradation of deep-sea HMW organic nitrogen. |
|
|---|
Metalloproteases are grouped into 15 clans in the latest release (release 8.2) of the MEROPS database (the peptidase database at http://merops.sanger.ac.uk/) (25). Clan MA, the largest clan of metalloproteases, contains zinc-dependent metalloproteases in which the first and second zinc ligands are the two histidines in the motif HEXXH (24). Based on the nature of the third zinc ligand, clan MA is divided into two subclans, MA(E) (gluzincins) with a glutamate residue as the third zinc ligand and MA(M) (metzincins) with a histidine or aspartate residue as the third zinc ligand in the extended motif HEXXHXXGXXH/D. In the MA(M) subclan, family M12 is the second largest family and is divided into two subfamilies, subfamilies M12A and M12B (24). The members of M12A are astacin-like metalloproteases with the conserved M-turn sequence SIMHY at the fourth zinc ligand (16, 24). Interestingly, most members of family M12 are from animals, function in the extracellular space, and occur as either membrane-bound or secreted enzymes (17, 24). Flavastacin is the only bacterial protease in the M12 family that has been purified and characterized to date, and this enzyme is a glycosylated protease secreted by the pathogenic organism Flavobacterium meningosepticum that was reported in 1995 (23, 26, 29, 30). Because no bacterial protease belonging to M12 other than flavastacin has been reported since 1995, it has been debated whether the occurrence of flavastacin demonstrates that the zinc-binding motif of the astacin subfamily appeared long ago before the divergence of prokaryotes and eukaryotes or is the result of a horizontal transfer (30).
Myroides profundi D25 is a newly described protease-producing barotolerant bacterium which was isolated from the deep-sea sediment at a water depth of 1,245 m at site MD05-2907 (24°47.19' N, 122°29.30' E) near southern Okinawa (33). In this paper, the protease produced by M. profundi D25, designated myroilysin, is described. Gene cloning, sequence analysis, purification, characterization of the specificity, the caseinolytic and elastinolytic activities, and the collagen-swelling ability of myroilysin are described. The results showed that this enzyme is a novel astacin-like metalloprotease belonging to subfamily M12A that has elastinolytic activity and plays a synergistic role with collagenase in collagen hydrolysis since it swells collagen.
|
|
|---|
Protease purification.
Strain D25 was grown in a fermentation medium composed of 2.0% corn powder, 2.0% bean powder, 1.0% wheat bran, 0.4% Na2PO4, 0.03% KH2PO4, 0.1% CaCl2, and artificial seawater (pH 8.0) with shaking for 72 h at 15°C as previously described (6). The culture was centrifuged at 10,000 x g for 15 min at 4°C. The proteins in the supernatant were precipitated by slowly adding ammonium sulfate powder to a concentration of 55%. The precipitate was collected by centrifugation (8,500 x g, 10 min) and dissolved in 50 mM Tris-HCl buffer (pH 8.9). The sample was put on a DEAE-Sepharose Fast Flow chromatography column (1.6 cm by 20 cm) preequilibrated with the same buffer. Then the column was eluted with a linear gradient of 0 to 0.8 M NaCl. The fraction with protease activity was collected. The enzyme purity was analyzed by 12.5% SDS-PAGE. The molecular mass was analyzed using matrix-assisted laser desorption ionization—time of flight mass spectrometry (Applied Biosystems Voyager DE Pro; ABI, United States).
For overexpression and purification of pseudolysin, the gene encoding pseudolysin was cloned by PCR from the genome DNA of Pseudomonas aeruginosa PAO1, which was generously provided by Li-yan Yu (National Laboratory for Screening New Microbial Drugs, Institute of Medicinal Biotechnology). Then it was overexpressed in E. coli BL21(DE3) with pET-22b as the expression vector and 1 mM isopropyl-β-D-thiogalactopyranoside (IPTG) as an inducer. After cultivation at 37°C overnight, cells were collected and disrupted by sonication in an ice bath. Then the cell extract was incubated at 30°C for 2 h to promote the maturation of pseudolysin. After incubation, the enzyme was purified by precipitation with 60% solid ammonium sulfate, followed by elution of a DEAE Sepharose Fast Flow column with 0 to
0.5 M NaCl in 50 mM Tris-HCl buffer (pH 9.5). Fractions with high protease activities were collected, dialyzed against 50 mM Tris-HCl buffer (pH 7.9), and analyzed by 12.5% SDS-PAGE.
N-terminal amino acid sequence analysis of myroilysin.
Purified myroilysin run in an SDS-PAGE gel was transferred to a Sequi-Blot polyvinylidene difluoride membrane (Bio-Rad). Its N-terminal amino acid sequence was analyzed by Edman degradation with PROCISE491 (Applied Biosystems), and the result was the sequence GAVVRSTKWPNGSVITVGLYGGTPYVRSKVKQYAQEWSNY. A BLAST analysis in NCBI showed that this sequence had the highest levels of identity to the sequences of two Zn-containing metalloproteases (accession numbers ABK97392.1 and AAZ45577.1).
Cloning of the gene encoding myroilysin.
Genomic DNA of M. profundi D25 was extracted by the NaCl-cetyltrimethylammonium bromide method (21). Based on the N-terminal amino acid sequence of myroilysin and the conserved sequence of the catalytic center of Zn-containing metalloproteases, two primers were designed and synthesized. With the genomic DNA as template, PCR amplification was performed by using Taq DNA polymerase for 30 cycles consisting of 94°C for 30 s, 50°C for 1 min, and 72°C for 2 min. A 350-bp product was amplified and sequenced. Then six specific primers were designed based on the 5' terminal sequence and 3' terminal sequence of this product, and two general primers were designed, one containing a protein initiation codon and one containing a stop codon. Chromosome walking was used to amplify the neighboring sequence of the 350-bp product by thermal asymmetric interlaced PCR (15). A 1,050-bp upstream sequence and a 547-bp downstream sequence of the 350-bp product were amplified from the genomic DNA and sequenced. Through assembly, a 1,947-bp sequence containing an 822-bp open reading frame that encodes myroilysin was obtained. After it was verified by PCR, the sequence of this gene was submitted to GenBank.
Protein determination and enzyme assay.
Proteins were assessed by Bradford's method with bovine serum albumin as the standard (4). The caseinolytic activity was determined as previously described (6). One unit of enzyme activity was defined as the amount of enzyme that catalyzed the formation of 1 µg tyrosine per min. The elastinolytic activity was assayed by the method of Sachar et al. (28), with a slight modification. The enzyme was incubated with 5 mg elastinorcein in 0.25 ml 50 mM Tris-HCl with continuous stirring for 1 h, and then the residual elastinorcein was removed by centrifugation. The absorption at 590 nm of the supernatant was measured. One unit of enzyme activity was defined as the amount of enzyme that caused an increase of 0.01 U of absorbance at 590 nm per min. The collagenolytic activities with type I collagen and gelatin (1%) were determined by the method provided by Worthington Biochemical Co. (10). The reaction times were 5 h for type I collagen fiber and 0.5 h for gelatin. For type I collagen fiber, 1 U is defined as the release of 1 µmol of L-leucine equivalents from collagen in 5 h. For gelatin, 1 U is defined as the release of 1 µmol of L-leucine equivalents from gelatin in 1 min. The amidolytic activities with N-succinyl-Phe-Ala-Ala-Phe-p-nitroanilide (Su-FAAF-pNa), N-succinyl-Ala-Ala-Ala-p-nitroanilide (Su-AAA-pNa), and N-succinyl-Ala-Ala-Pro-Phe-p-nitroanilide (Su-AAPF-pNa) were determined by the method of Peek et al. (22). One unit of enzyme activity was defined as the amount of enzyme that catalyzed the formation of 1 µmol of p-nitroaniline per min. Fibrin and fibrinogen degradation was determined electrophoretically by the method of Datta et al. (7). The proteolytic activity with furylacryloyl-Gly-Leu-NH2 and furylacryloyl-Gly-Phe-NH2 was measured by using Feder's method (9).
Analysis of the myroilysin cleavage sites on the oxidized insulin B chain.
Myroilysin was incubated with oxidized insulin B chain (1:40, by mass) in 50 mM Tris-HCl (pH 9.0) at 37°C for 15, 30, and 50 min, and then the reaction was stopped by adding 1% trifluoroacetic acid. The hydrolytic products were separated on a C18 column (Venusil MP C18), using a high-performance liquid chromatography (HPLC) system (LC-10ADVP), by the method described by Authier et al. (2). The molecular masses of the hydrolytic products were analyzed by mass spectrometry using Thermo LTQ mass spectrometry. The sequence of every hydrolytic product was analyzed by using proteomics and sequence analysis tools at the expasy website (http://www.expasy.org) based on its molecular mass.
Observation of hydrolysis of fibrous elastin by myroilysin.
One milliliter of 50 mM Tris-HCl (pH 9.0) containing 100 µg/ml myroilysin was incubated with 10 mg fibrous elastin at 37°C with continuous stirring. Fibrous elastin in 50 mM Tris-HCl (pH 9.0) without myroilysin was used as a control. After treatment for 1, 2, and 3 h, the samples were observed with an inverted microscope (Olympus IX71) at room temperature.
Analysis of the collagen-swelling ability of myroilysin.
Ten milligrams of type I collagen fiber was added to 2 ml 50 mM Tris-HCl (pH 9.0) containing different concentrations (0, 30, 50, 80, and 100 µg/ml) of myroilysin or 6 M urea in tubes. The samples were incubated at 37°C for 1 h with continuous stirring and then were photographed. To analyze the collagen-swelling ability of myroilysin in seawater at 4°C, a tube containing 10 mg collagen in artificial seawater and 100 µg/ml myroilysin was incubated for 5 h at 4°C with continuous stirring. Samples treated with 0 and 100 µg/ml myroilysin were observed by scanning electron microscopy (SEM) (Hitachi S-570) by using the method of Usha and Ramasami (32).
Analysis of the synergistic role of myroilysin with collagenase in collagen hydrolysis.
Five milligrams of type I collagen fiber in 50 mM Tris-HCl (pH 9.0) in the presence and absence of 100 µg/ml myroilysin was incubated at 37°C for 1 h with continuous stirring. Then 20 µg/ml collagenase from C. histolyticum was added, and the samples were incubated at 37°C for 5 h with continuous stirring. After incubation, the samples were centrifuged, and the collagenolytic activity in the supernatant was measured. The sample without either myroilysin or collagenase and the sample with myroilysin but no collagenase were used as controls.
Nucleotide sequence accession number.
The sequence of the gene that encodes myroilysin has been deposited in the GenBank database under accession no. EU883966.
|
|
|---|
![]() View larger version (8K): [in a new window] |
FIG. 1. Growth of (A) and protease production by (B) M. profundi D25 in different media at 15°C. Seawater medium was artificial seawater (pH 8.0); casein medium was artificial seawater containing 0.4% casein (pH 8.0); Casamino Acids medium was artificial seawater containing 0.4% Casamino Acids; and fermentation medium was prepared as described in Materials and Methods. OD600nm, optical density at 600 nm.
|
|
View this table: [in a new window] |
TABLE 1. Physicochemical characteristics of myroilysin
|
Analysis of the substrate specificity of myroilysin.
The substrate specificity of myroilysin with various proteins and synthetic peptides was assayed and compared with that of pseudolysin, a well-characterized bacterial elastase in family M4 (12, 18-20), because no elastase in family M12 has been reported. Myroilysin could hydrolyze various proteins, including casein, fibrous elastin, fibrinogen, fibrin, and gelatin (Table 2). It had 6.78 U/mg elastinolytic activity in artificial seawater at 4°C, suggesting that it probably can degrade elastin in the deep sea. When it hydrolyzed fibrinogen and fibrin, it produced peptides different from those produced by pseudolysin (see Fig. S7 in the supplemental material), showing that its cleavage sites on fibrinogen and fibrin were different from those of pseudolysin. Myroilysin had little activity with type I collagen fibers. For synthetic peptides, it had slight amidolytic activity with Su-FAAF-pNa, Su-AAA-pNa, and Su-AAPF-pNa and no proteolytic activity with furylacryloyl-Gly-Leu-NH2 and furylacryloyl-Gly-Phe-NH2. In contrast, pseudolysin had no amidolytic activity with Su-FAAF-pNa, Su-AAA-pNa, and Su-AAPF-pNa and high proteolytic activity with furylacryloyl-Gly-Leu-NH2 and furylacryloyl-Gly-Phe-NH2 (Table 2).
|
View this table: [in a new window] |
TABLE 2. Substrate specificity of myroilysin with various proteins and synthetic peptides
|
|
View larger version (3K): [in a new window] |
FIG. 2. Cleavage of oxidized insulin B chain by myroilysin. The cleavage pattern of myroilysin with the oxidized insulin B chain was determined as described in Materials and Methods.
|
45°C and pH 9 with elastinorcein. Its thermostability was rather low. A 100-µg/ml myroilysin solution in 50 mM Tris-HCl (pH 9.0) lost 50% of its activity at 45°C in 5 min and at 40°C in 28 min (Table 1; see Fig. S11 in the supplemental material). Therefore, the longer reaction time for elastinorcein hydrolysis (1 h) than for casein hydrolysis (10 min) might result in the lower optimum temperature with elastinorcein than with casein. At 50°C with casein as the substrate, the Km and Vmax of myroilysin were 0.38% and 57.8 µM/min, respectively (see Fig. S12 in the supplemental material). The metal ions Fe2+, Co2+, Ni2+, and Zn2+ were found inhibit the caseinolytic and elastinolytic activities of myroilysin, whereas Li+, K+, Mg2+, Ca2+, Sr2+, Ba2+, and Na+ had a little or no effect. The metal-chelating agent 1,10-phenanthroline could completely inhibit the caseinolytic and elastinolytic activities, while EGTA and EDTA had moderate inhibitory effects and leuhistin had little effect (Table 3).
![]() View larger version (121K): [in a new window] |
FIG. 3. Hydrolysis of fibrous elastin by myroilysin observed using an inverted microscope. Ten milligrams of fibrous elastin in 1 ml 50 mM Tris-HCl (pH 9.0) containing 100 µg/ml myroilysin was incubated at 37°C with continuous stirring. Fibrous elastin in 50 mM Tris-HCl (pH 9.0) without myroilysin was used as a control. After treatment for 1, 2, and 3 h, the samples were photographed with an inverted microscope (Olympus IX71) at room temperature. Magnification, x960.
|
|
View this table: [in a new window] |
TABLE 3. Effects of metal ions and protease inhibitors on the caseinolytic and elastinolytic activities of myroilysin
|
![]() View larger version (108K): [in a new window] |
FIG. 4. (A) Collagen swelling with myroilysin and urea. Ten milligrams of collagen in 2 ml 50 mM Tris-HCl buffer (pH 9.0) was incubated for 1 h at 37°C with continuous stirring. Tubes 1 to 5 contained 0, 25, 50, 75, and 100 µg/ml myroilysin, respectively. Tube 6 contained 6 M urea. Tube 7 contained 100 µg/ml myroilysin and 4 mM 1,10-phenanthroline. Tube 8 containing 10 mg collagen in artificial seawater and 100 µg/ml myroilysin was incubated for 5 h at 4°C with continuous stirring. (B) Collagen swollen by myroilysin as observed by SEM (Hitachi S-570). The control was 10 mg of collagen in 2 ml 50 mM Tris-HCl buffer that was incubated at 37°C for 1 h. For treatment, 10 mg of collagen in 2 ml 50 mM Tris-HCl buffer containing 100 µg/ml myroilysin was incubated at 37°C for 1 h. The samples were observed by SEM (Hitachi S-570) by using the method of Usha and Ramasami (22).
|
![]() View larger version (6K): [in a new window] |
FIG. 5. Synergistic action of collagenase and myroilysin for collagen hydrolysis. Five milligrams of type I collagen fiber in 1 ml 50 mM Tris-HCl buffer was incubated at 37°C with continuous stirring. Bar M, sample containing 100 µg/ml myroilysin that was incubated for 6 h; bar C, sample that was incubated for 1 h, after which 20 µg/ml collagenase was added and the preparation was incubated for 5 h; bar M+C, sample containing 100 µg/ml myroilysin that was incubated for 1 h, after which 20 µg/ml collagenase was added and the preparation was incubated for 5 h.
|
|
|
|---|
Myroilysin had broad specificity with various proteins, such as casein, fibrous elastin, fibrinogen, fibrin, and gelatin. It had much higher specific activity with elastin than pseudolysin, a well-characterized bacterial elastase belonging to family M4, had (12, 18-20). Microscope observation also showed it could cleave fibrous elastin. These findings show that myroilysin is an elatase. To our knowledge, this enzyme is the first reported elastase in family M12. The cleavage pattern of myroilysin with the oxidized insulin B chain also showed that it had broad specificity and that it shared some, but not all, cleavage sites with pseudolysin and porcine pancreatic elastase (8). These results show the difference between myroilysin and pseudolysin in terms of substrate specificity. The role of myroilysin in strain D25 is to degrade surrounding proteins for nutrients. The broad specificity of myroilysin enables it to be versatile for protein degradation. Although myroilysin had high optimum temperatures with casein (50°C) and elastin (40 to
45°C), its thermostability is rather low, which may be the result of its long-term adaptation to the permanently cold environment in the deep sea.
It has been reported that animal elastase has a synergistic effect with collagenase in collagen degradation (27, 34). Although some bacterial elastases have been studied (8, 18, 31), there has been no report that a bacterial elastase has a synergistic effect with collagenase in collagen degradation. Myroilysin did not readily hydrolyze type I collagen fiber, yet its collagen-swelling activity exceeded that of 6 M urea. It can be speculated that myroilysin synergistically interacts with other enzymes in the in situ biotic assemblage and that it may play an important role in the degradation of deep-sea HMW organic nitrogen.
Published ahead of print on 5 February 2009. ![]()
Supplemental material for this article may be found at http://aem.asm.org/. ![]()
|
|
|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»